Datasheet

CTI – SOFTWARE DEVELOPMENT GROUP
© 2008 Electrolux Major Appliances Europe, All rights reserved
8
File: AMI technical Guide v1.pdf - Date: 04/02/2008
Pin Name Notes
1 VBUS Power
2 D- Data -
3 D+ Data +
4 GND Ground
Table 2.1 USB Type B Female Connector Pin Assignment
You connect the AMI to the PC using a standard USB cable Male A to Male B. The maximum
length of the USB able is 5 meters.
Fig. 7. Standard USB Cable Male A to Male B
The External Power Connector is a standard male jack connector (2.5 mm diameter):
GND
Unregulated
9 – 12 V
DC
GND
Unregulated
9 – 12 V
DC
Fig. 8. Power Connector
The Power LED has only one colour: green when the module is powered on.
The External Power LED has only one color: yellow when the +5V
DC
are present on the
secondary stage. To provide +5V
DC
to the secondary stage it is necessary to activate the Secondary
Power Switch.
The Target Cable is a shielded cable that connects the AMI to the Appliance Cable.