Datasheet

CTI – SOFTWARE DEVELOPMENT GROUP
© 2008 Electrolux Major Appliances Europe, All rights reserved
30
File: AMI technical Guide v1.pdf - Date: 04/02/2008
5.6. Additional Options
The driver provides additional options that you may want to override.
Open the Device Manager by right click on My Computer, then select Properties >> Hardware
>> Device Manager.
From Device Manager, expand the “Universal Serial Bus controllers” node and select the name
of the interface module (for example Appliance Mini Interface). Right click on the entry and click
Properties. Select the Advanced tab:
Fig. 39. Load VCP Option
The Load VCP option, allows you to enable or enable or disable the creation of the Virtual COM
port (VCP) when you connect the device to the PC. By default virtual COM port creation is
enabled.
Please remember that VCP support is essential when you use the Electrolux DAAS protocol. For
this reason, CTI recommends you to leave this option set.