Datasheet

CTI – SOFTWARE DEVELOPMENT GROUP

File: AMI technical Guide v1.pdf - Date: 04/02/2008

5.4. Verifying the setup

In order to verify the installation of the USB drivers and the correct operation of the plug-and-

play features, right click on My Computer, then select Properties >> Hardware >> Device

Manager.

When the interface module is connected to the PC through the USB cable, the Device Manager

should display two entries showing the name of the interface module: one under “Ports (COM &

LPT)” and the other under “Universal Serial Bus controllers”. For example if the “Appliance

Universal Adapter” is connected:

Fig. 37. Device Manager

Then verify that these entries disappear if you disconnect the interface module. Finally check

that these entries appear if you turn on or connect again the module.