Datasheet

CTI – SOFTWARE DEVELOPMENT GROUP

File: AMI technical Guide v1.pdf - Date: 04/02/2008

Fig. 28. Driver Signing Warning in XP

In this case you should just select Continue Anyway and ignore the above message.

Under Vista instead, you see a dialog box that displays the following message: “Windows can’t

verify the publisher of this driver software”. In this case you can safely issue the “Install this

driver software anyway” command.

Currently CTI-Software Development Group does not yet know whether in the future it will

certify or not the USB drivers for the appliance adapters.

5.3. Installing the drivers

The instructions that follow in this paragraph refer to Windows XP Professional Service Pack 2 –

English Version. Other versions of this operating system may require slightly different commands.

Although Windows 2000 and Vista require different steps, the general concepts still apply. For

this reason you can refer to this section also if you are using Windows 2000 and Vista.

If you use the AMI for the first time, you need the files of the ELECTROLUX CDM Driver

Disk. To install them you should follow the next simple steps (if you experience a problem please

refer to the next paragraph on “driver signing” issues):

• Connect the AMI to the PC by means on a type A-B (male/male) USB cable.

• Wait for the plug-and-play (PnP) manager to detect the new hardware. You should see the

following message: