Datasheet

CTI – SOFTWARE DEVELOPMENT GROUP
© 2008 Electrolux Major Appliances Europe, All rights reserved
15
File: AMI technical Guide v1.pdf - Date: 04/02/2008
4.2. Board Connector Pin Assignments
The following figure shows the pin assignments for the DAAS cables with RAST2.5 edge
connector:
1: Target Device RxD (TxD Host)
2: Target Device TxD (RxD Host)
3: +5VDC (regulated)
4: GND
EDGE RAST2.5 - 4 way
(Lumberg 3521 04)
(Front View – Contacts Side)
1: Target Device RxD (TxD Host)
2: Target Device TxD (RxD Host)
3: +5VDC (regulated)
4: GND
EDGE RAST2.5 - 4 way
(Lumberg 3521 04)
(Front View – Contacts Side)
Fig. 18. RAST2.5 Edge Connector Pin Assignments
Fig. 19 shows the pin assignments for the DAAS cables with RAST5 edge connector:
1 Target Device RxD (TxD Host)
2: Target Device TxD (RxD Host)
3: +5VDC (regulated)
4: GND
EDGE RAST5 - 4 way
(Lumberg 3636 04)
(Front View – Contacts Side)
1 Target Device RxD (TxD Host)
2: Target Device TxD (RxD Host)
3: +5VDC (regulated)
4: GND
EDGE RAST5 - 4 way
(Lumberg 3636 04)
(Front View – Contacts Side)
Fig. 19. RAST5 Edge Connector Pin Assignments
The following figure shows instead the pin assignments for the DAAS cables with JST NVR-04
crimp style connector (for ENV06 fabric care appliances):
Disconnectable Connector – Female Contacts
(JST NVR-04 female crimp style)
(Front View – Contacts Side)
1 Target Device RxD (TxD Host)
2: Target Device TxD (RxD Host)
3: +5VDC (regulated)
4: GND
Disconnectable Connector – Female Contacts
(JST NVR-04 female crimp style)
(Front View – Contacts Side)
1 Target Device RxD (TxD Host)
2: Target Device TxD (RxD Host)
3: +5VDC (regulated)
4: GND
Fig. 20. JST NVR-04 Connector Pin Assignments