ESF8635ROW ESF8635ROX EN Dishwasher User Manual
www.electrolux.com CONTENTS 1. SAFETY INFORMATION....................................................................................3 2. SAFETY INSTRUCTIONS..................................................................................4 3. PRODUCT DESCRIPTION................................................................................ 6 4. CONTROL PANEL ............................................................................................ 7 5. PROGRAMMES.....................................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.electrolux.com • • • • • • Put the cutlery in the cutlery basket with the sharp ends pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down. Do not leave the appliance with the open door unattended to avoid stepping accidentally onto it. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean the appliance.
ENGLISH • • devices fitted (water meters, etc.), let the water flow until it is clean and clear. Ensure that there are no visible water leaks during and after the first use of the appliance. The water inlet hose has a safety valve and a sheath with an inner mains cable. • • • • • 5 Dishwasher detergents are dangerous. Obey the safety instructions on the detergent packaging. Do not drink and play with the water in the appliance.
www.electrolux.com 3.
ENGLISH 4. CONTROL PANEL 1 2 8 1 2 3 4 5 On/off button Program button Programme indicators Display Delay button 3 4 7 5 6 6 Start button 7 Indicators 8 Option button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Drying phase. It comes on when the drying phase operates. TimeManager indicator. XtraDry indicator. Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates.
www.electrolux.com 5.
ENGLISH Water (l) Energy (kWh) Duration (min) 7 - 14 0.6 - 1.6 40 - 170 14 - 16 1.2 - 1.5 160 - 180 12.5-14.5 1.4-1.7 170-190 12 - 14 0.7 - 0.9 82-92 10 0.9 30 Programme 1) 9 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test institutes For all the necessary information for test performance, send an email to: info.test@dishwasher-production.
www.electrolux.com advise you on the hardness of the water in your area. It is important to set the right level of the water softener to assure good washing results. Water hardness German de‐ grees (°dH) French de‐ grees (°fH) mmol/l Clarke de‐ grees Water softener level 47 - 50 84 - 90 8.4 - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - 39 3.
ENGLISH • The indicators , • The indicator still flashes. The display shows the current 11 and are off. • = the rinse aid empty setting: notification is activated (factory setting). 2. Press Option to change the setting. = the rinse aid empty notification is deactivated. 3. Press on/off to confirm the setting. While the drying phase operates, a device opens the appliance door. The door is then kept ajar. 6.4 The rinse aid dispenser The rinse aid helps to dry the dishes without streaks and stains.
www.electrolux.com It is possible to save only 1 programme. A new setting cancels the previous one. How to set the MyFavourite programme How to save the MyFavourite programme Press and hold Program until the indicators that are related to the MyFavourite programme and options are on. The display shows the duration of the programme. 1. Set the chosen programme. It is also possible to set applicable options together with the programme. 2.
ENGLISH 13 8. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Start a programme to remove any processing residuals that can still be inside the appliance. Do not use detergent and do not load the baskets.
www.electrolux.com 4. Close the lid. Make sure that the lid locks into position. Fill the rinse aid dispenser when the indicator (A) becomes clear. If you use multi-tablets and the drying performance is satisfactory, the rinse aid refill indication can be disabled. We recommend to always use rinse aid for better drying performance, also in combination with multitablets containing rinsing agent. 9. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance.
ENGLISH 15 4. Set the applicable options. 5. Press Start to start the programme. • The washing phase indicator comes on . • The programme duration starts to decrease with steps of 1 minute. Cancelling the delay start while the countdown operates Starting a programme with delay start Press and hold simultaneously Program and Option until the appliance is in programme selection mode. 1. Set a programme. 2. Press Delay again and again until the display shows the desired delay time (from 1 to 24 hours).
www.electrolux.com 10. HINTS AND TIPS 10.1 General The following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment. • • • • • • Remove larger residues of food from the dishes into the waste bin. Do not pre-rinse dishes by hand. When needed, use the prewash programme (if available) or select a programme with a prewash phase. Always use the whole space of the baskets.
ENGLISH 17 10.5 Before starting a programme • Make sure that: 10.6 Unloading the baskets • 1. Let the tableware cool down before you remove it from the appliance. Hot items can be easily damaged. 2. First remove items from the lower basket, then from the upper basket. • • • • • The filters are clean and correctly installed. The cap of the salt container is tight. The spray arms are not clogged. There is dishwasher salt and rinse aid (unless you use multi- tablets).
www.electrolux.com 11.2 Cleaning the upper spray arm We recommend to clean regularly the upper spray arm to avoid soil to clog the holes. Clogged holes can cause unsatisfactory washing results. 5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides. 1. Pull out the upper basket. 2.
ENGLISH 19 11.4 Internal cleaning • • • 11.3 External cleaning • • • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads or solvents. Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. If you use short duration programmes regularly, these can leave deposits of grease and limescale inside the appliance.
www.electrolux.com Problem and alarm code Possible cause and solution The appliance does not fill with water. • • The display shows or . • • • The appliance does not drain the water. The display shows . • • • • The anti-flood device is on. • The display shows . Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged.
ENGLISH Problem and alarm code 21 Possible cause and solution The appliance trips the cir‐ • cuit-beaker. The amperage is insufficient to supply simultaneous‐ ly all the appliances in use. Check the socket amper‐ age and the capacity of the meter or turn off one of the appliances in use. Internal electrical fault of the appliance. Contact an Authorised Service Centre. • Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes.
www.electrolux.com Problem Possible cause and solution The dishes are wet. • • • • • For the best drying performance activate the option XtraDry and set AirDry . The programme does not have a drying phase or has a drying phase with low temperature. The rinse aid dispenser is empty. The quality of the rinse aid can be the cause. The quality of the multi-tablets can be the cause. Try a different brand or activate the rinse aid dis‐ penser and use rinse aid and multi-tablets together.
ENGLISH 23 Refer to "Before first use", "Daily use" or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 850 / 610 Electrical connection 1) Voltage (V) 220 - 240 Frequency (Hz) 50 bar (minimum and maximum) 0.5 - 8 MPa (minimum and maximum) 0.05 - 0.8 Water supply Cold water or hot water 2) max 60 °C Capacity Place settings 15 Power consumption Left-on mode (W) 5.0 Power consumption Off-mode (W) 0.
117880531-A-252017 www.electrolux.
