user manual Dishwasher ESF 68040
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.
electrolux 3 • Keep all detergents in a safe area. Do not let children touch the detergents. • Keep the children and pets away from the appliance when the door is open. Installation • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier. • Remove all packaging before first use. • A qualified and competent person must do the electrical installation. • A qualified and competent person must do the plumbing installation.
electrolux Product description 11 10 9 1 2 3 4 5 6 7 8 9 10 11 Ceiling spray arm Upper basket Water hardness dial Salt container Detergent dispenser Rinse aid dispenser Rating plate Filters Lower spray arm Upper spray arm Worktop Internal light This appliance has an internal light that comes on when you open the door and goes off when the door is closed. Warning! Visible led radiation, do not stare into the beam.
electrolux 5 Control panel 1 2 3 4 5 6 On/off button Scroll buttons Option button Cancel button OK//Start button Display To help you operate with the appliance, the display shows messages and you can hear audible signals. Scroll buttons These buttons have two functions: • select in the program menu, • select in the option menu and option submenu. OK/Start button Use this button to: • confirm or memorise a program setting, • start a washing program.
electrolux Menu Submenu MULTITAB The multitab function is for combi detergent tablets. Refer to 'Multitab function'. – ON the multitab symbol shows in the display. – OFF SETTINGS LANGUAGE You can set a different language for the messages that show in the display. WATER HARDNESS You can adjust the water softener level. Refer to 'Set the water softener'. RINSE AID You can activate or deactivate the rinse aid dispenser.
electrolux 7 Use of the appliance Switch on for the first time - set the display language 1. Switch on the appliance. 2. When the display shows LANGUAGE ENGLISH and the word ENGLISH flashes, you can confirm or change the language. 3. Press the OK/Start button to confirm english or follow these steps to change the language: – press the up-and-down scrolling buttons until the display shows the required language. – Press the OK/Start button to confirm.
electrolux Electronic adjustment The dishwasher is factory set at level 5. 1. 2. 3. 4. 5. 4. Install the lower basket. 5. Close the door. Switch on the appliance. Select the option menu. Select SETTINGS. Select WATER HARDNESS. Use the scroll buttons to set the water softener level. 6. Press the Ok/Start button to confirm. Use of dishwasher salt Caution! Only use dishwasher salt. Types of salt that are not suitable for dishwashers cause damage to the water softener.
electrolux 9 Rinse aid makes it possible to dry the dishes without streaks and stains. Rinse aid is automatically added during the last rinsing phase. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during the subsequent washing program. 4. Close the rinse aid dispenser. Follow these steps to fill the rinse aid dispenser: 1. Press the release button (A) to open the rinse aid dispenser. Adjusting the rinse aid dosage The rinse aid is set at the factory at position 4.
electrolux • While you load cutlery and dishes, do these steps: – Load hollow items (e.g. cups, glasses and pans) with the opening down. – Make sure that water does not collect in the container or in a deep base. – Make sure that cutlery and dishes do not lie inside one another. – Make sure that cutlery and dishes do not cover other cutlery and dishes. – Make sure that glasses do not touch other glasses. – Put small objects in the cutlery basket.
electrolux 11 1. Pull up the hooks and push them lightly from below. 2. Use the hooks to put the cup racks on the horizontal bar. Push the support to the rear to remove the support of the beer glass holders. Use the cutlery grids for best washing results. • Put the grids on the cutlery basket. • For larger items use only one of the cutlery grids • Put forks and spoons with the handles down. • Put knives with the handles up. Push the support to the front to attach the support of the beer glass holders.
electrolux 3. Remove the cutlery. Hold the two parts of the handle tightly when you move the cutlery basket. • Put glasses with long stems in the cup racks with the stems up. • For glasses with long stems, turn the glass holder to the left or to the right. The upper basket The upper basket is for saucers, salad bowls, cups, glasses and lids. Arrange the items to let water touch all surfaces. • You can fold up or down the row of prongs on the left side of the upper basket to increase load flexibility.
electrolux 13 Maximum height of the dishes in: the upper basket the lower basket Upper position 22 cm 30 cm Lower position 24 cm 29 cm 2. Hold the upper basket by the handle, lift it as far as possible and lower it vertically. The upper basket latches into the lower or the upper position. Follow these steps to move to the upper basket to the lower/upper position: 1. Pull out the upper basket until it stops.
electrolux A B 3. If you use a washing program with prewash, put more detergent in the prewash detergent compartment (B). 4. If you use detergent tablets, put the detergent tablet in the detergent dispenser (A) . 5. Close the lid of the detergent dispenser. Press the lid until it locks into position. Different brands of detergent dissolve in different times. Some detergent tablets do not have the best cleaning results during short washing programs.
electrolux 15 Select and start a washing program Follow these steps to set and start a washing program: 1. Switch on the appliance. 2. Set options (if required). Refer to 'Option menu'. 3. Select the washing program by pressing the scroll buttons until the desired program is shown, then press OK/Start. Refer to the 'Washing programs' chart for program details. 4. Set the delay start (if required). Refer to 'Option menu'. To start a washing program the appliance must be in program selection mode.
electrolux • There can be water on the sides and door of the appliance. Stainless steel becomes cool more quickly than the dishes.
electrolux 17 Program 1) Energy (in kWh) Water (in litres) 50° ECO 0,8 - 0,88 10 - 11 55° 1 HOUR 1,0 - 1,2 11 - 12 45° GLASS 0,8 - 0,9 14 - 15 PLATE WARMER 0,8 4 PREWASH 0,1 4 1) The display shows the program duration. The pressure and temperature of the water, the variations of power supply and the quantity of dishes can change these values. Care and cleaning Warning! Switch the appliance off before you clean it.
electrolux 11. Put the filter system in position. 12. To lock the filter system, turn the handle on the microfilter (B) clockwise until it locks in position. 13. Install the lower basket. 14. Close the door. Do not remove the spray arms. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Keep the door open to prevent unpleasant smells. 4. Keep the inner side of the appliance clean.
electrolux 19 Fault code and malfunction Possible cause and solution • the digital display shows the mes- • Close the water tap and contact your Customer Care Centre. sage SERVICE CODE The anti-flood device operates The program does not start • The appliance door is not closed. The display shows the message PLEASE CLOSE DOOR. Close the door. • Mains plug is not connected. Plug-in appliance to the mains. • The fuse has blown out in the household fuse box. Replace the fuse. • Delay start is set.
electrolux Maximum Capacity Place settings 800 kPa (116 psi) 12 Installation Fitting under a counter Warning! Make sure that mains plug is disconnected from the mains socket during installation. Put the appliance adjacent to a water tap and a water drain. The plinth of a freestanding appliance is not adjustable. Do not remove the appliance's worktop if you want to use it as a freestanding unit. It is not necessary to remove the worktop when installing under a standard kitchen bench top.
electrolux 21 Caution! Always use new hoses when you connect the appliance to the water mains. Old hoses must not be used. The water inlet hose must be examined at an interval of twelve months for deterioration and replaced if necessary. The water pressure must be in the limits (refer to 'Technical data'). Make sure that the local water authority gives you the average mains pressure in your area.
electrolux Caution! Make sure that the water couplings are tight to prevent water leakage. Ensure that hoses are not crushed or kinked under or behind the appliance. Once connected the inlet hose to the water tap, turn the tap on and check that there are no leaks. Electrical connection Warning! Safety standards require the appliance to be earthed.
electrolux 23 Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND This document sets out the terms and conditions of product warranties for Electrolux branded appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Electrolux appliance. General Terms and Conditions 1.
electrolux – The Appliance's serial number or warranty seal has been removed or defaced. – The Appliance was serviced or repaired by anyone other than Electrolux or its Authorised Service Centres. 9. This warranty, the contract to which it relates and the relationship between you and Electrolux are governed by the law applicable in the Australian State where the Appliance was purchased or the law applicable in New Zealand if the Appliance was purchased in New Zealand.
electrolux 25
electrolux
electrolux 27
www.electrolux.com www.electrolux.com.
