user manual Dishwasher ESF 66060
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.
electrolux 3 Installation • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier. • Remove all packaging before first use. • A qualified and competent person must do the electrical installation. • A qualified and competent person must do the plumbing installation. • Do not change the specifications or modify this product. Risk of injury and damage to the appliance.
electrolux Product description 11 10 9 1 2 3 4 5 6 Ceiling spray arm Upper basket Water hardness dial Salt container Detergent dispenser Rinse aid dispenser 7 8 9 10 11 Rating plate Filters Lower spray arm Upper spray arm Worktop
electrolux 5 Control panel 7 1 2 3 4 5 6 7 On/off button Program selection buttons Multitab button (Tablet) Delay start button Indicator lights Digital display Function buttons Indicator lights Washing Program in progress: – comes on when you select a washing program, – stays on for all the duration of the washing program, – goes off at the end of the washing program. Salt The indicator light comes on when it is necessary to fill the salt container. Refer to 'Use of dishwasher salt'.
electrolux Digital display The display shows: • adjusted level of the water softener, • activation/deactivation of the rinse aid dispenser (only with multitab function on), • program duration, • remaining time to the end of the program, • end of a washing program, • number of hours in delay start, • fault codes. Function buttons Use the function buttons for these operations: • to set the water softener. Refer to 'Setting the water softener'.
electrolux 7 Water hardness Water hardness setting mg/l ppm mmol/l manually electronically < 70 < 70 < 0,7 1 11) 1) No use of salt required. You must set the water softener manually and electronically. Manual adjustment The appliance is set at the factory at position 2. 1. Open the door. 2. Remove the lower basket. 3. Turn the water hardness dial to position 1 or 2 (refer to the chart). 4. Install the lower basket. 5. Close the door. Electronic adjustment 1. Switch on the appliance. 2.
electrolux It is normal that water overflows from the salt container when you fill it with salt. Use of rinse aid Caution! Only use rinse aid specified for dishwashers. Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). This can cause damage to the appliance. Rinse aid makes it possible to dry the dishes without streaks and stains. Rinse aid is automatically added during the last rinsing phase. 3.
electrolux 9 Loading cutlery and dishes Helpful hints and tips Caution! Only use the appliance for household utensils that are suitable for dishwashers. Do not use the appliance to clean objects that can absorb water (sponges, household cloths, etc.). • Before you load cutlery and dishes, do these steps: – Remove all food remainings and debris. – Make burnt, remaining food in pans soft. • While you load cutlery and dishes, do these steps: – Load hollow items (e.g.
electrolux • For longer items fold the cup racks up. • Put the grids on the cutlery basket. • For larger items use only one of the cutlery grids. • Put forks and spoons with the handles down. • Put glasses with long stems in the cup racks with the stems up. • For glasses with long stems, turn the glass holder to the left or to the right. • Put knives with the handles up.
electrolux 11 • You can fold up or down the row of prongs on the left side of the upper basket to increase load flexibility. Maximum height of the dishes in: Lower position the upper basket the lower basket 24 cm 29 cm Follow these steps to move to the upper basket to the lower/upper position: 1. Pull out the upper basket until it stops. Adjustment of the height of the upper basket You can put the upper basket in two positions to increase load flexibility.
electrolux 5. Close the lid of the detergent dispenser. Press the lid until it locks into position. A B 3. If you use a washing program with prewash, put more detergent in the prewash detergent compartment (B). 4. If you use detergent tablets, put the detergent tablet in the detergent dispenser (A) . Different brands of detergent dissolve in different times. Some detergent tablets do not have the best cleaning results during short washing programs.
electrolux 13 Multitab function The multitab function is for combi detergent tablets. These tablets contain agents such as detergent, rinse aid and dishwasher salt. Some types of tablets can contain other agents. Do a check if these tablets are suitable for the local water hardness. Refer to the instructions from the manufacturer. The multitab function can be set with any program. When you set the multitab function, it stays on until you deactivate it.
electrolux Select and start a washing program Set the washing program with the door ajar. The washing program only starts after you close the door. Until then it is possible to modify the settings. 1. Press the on/off button. 2. Make sure that the appliance is in setting mode. 3. Press one of the program buttons. Refer to the 'Washing programs' chart for program details. – The program indicator light comes on. – The Washing indicator light comes on.
electrolux 15 Press one of the buttons (not the on/off button), to go back to end-of-program mode. Removing the load • First remove items from the lower basket, then from the upper basket. • There can be water on the sides and door of the appliance. Stainless steel becomes cool more quickly than the dishes.
electrolux Washing programs Washing programs Program Degree of soil Type of load Program description AUTO 50°-65°1) Any Crockery, cutlery, pots and pans Prewash Main wash up to 50°C or 65°C 1 or 2 intermediate rinses Final rinse Drying Quick 60° 2) Normal or light soil Crockery and cutlery Main wash up to 60°C Final rinse Intensive 70° Heavy soil Crockery, cutlery, pots and pans Prewash Main wash up to 70°C 2 intermediate rinses Final rinse Drying Eco 50°3) Normal soil Crockery and cut
electrolux 17 Care and cleaning Warning! Switch the appliance off before you clean it. Cleaning the filters 6. Remove the coarse filter from the microfilter. 7. Remove the flat filter (C) from the bottom of the appliance. Caution! Do not use the appliance without the filters. Make sure that the installation of the filters is correct. Incorrect installation will cause unsatisfactory washing results and damage to the appliance. If necessary, clean the filters. Dirty filters decrease the washing results.
electrolux 2. Close the water tap. 3. Keep the door open to prevent unpleasant smells. 4. Keep the inner side of the appliance clean. Frost precautions Caution! Do not install the appliance where the temperature is below 0 °C. The manufacturer is not responsible for damage because of frost. hose and remove water from the water inlet hose. Moving the machine Do these steps to move the appliance: 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3.
electrolux 19 The cleaning results are not satisfactory The dishes are not clean • The selected washing program is not applicable for the type of load and soil. • The baskets are loaded incorrectly so that water cannot reach all surfaces. • Spray arms do not turn freely because of incorrect arrangement of the load. • The filters are dirty or not correctly installed. • The quantity of detergent is too little or missing. The dishes are wet and dull • No rinse aid has been used.
electrolux Installation Fitting under a counter Warning! Make sure that mains plug is disconnected from the mains socket during installation. Put the appliance adjacent to a water tap and a water drain. The plinth of a freestanding appliance is not adjustable. Do not remove the appliance's worktop if you want to use it as a freestanding unit. It is not necessary to remove the worktop when installing under a standard kitchen bench top.
electrolux 21 Make sure that there are no kinks in the water inlet hose and that the water inlet hose is not squashed or entangled. Fit the hose nut correctly to prevent water leaks. Caution! Do not connect the appliance to new pipes or pipes that have been not used for a long time. Let the water run for some minutes, then connect the inlet hose. The water inlet hose is double-walled and has an inner mains cable and a safety valve. The water inlet hose is under pressure only while the water is running.
electrolux Electrical connection Warning! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate. Always plug the mains plug onto a correctly installed approved socket. Do not use multi-ways plugs, connectors and extension cables.
electrolux 23 2. 3. 4. 5. 6.
electrolux Trading Act in New Zealand, imply warranties or conditions, or impose obligations, upon Electrolux which cannot be excluded, restricted or modified.
electrolux 25
electrolux
electrolux 27
www.electrolux.com www.electrolux.com.
