ESF5201LOW EN DISHWASHER USER MANUAL
www.electrolux.com CONTENTS 1. SAFETY INFORMATION...................................................................................... 2 2. SAFETY INSTRUCTIONS.....................................................................................4 3. PRODUCT DESCRIPTION................................................................................... 5 4. CONTROL PANEL............................................................................................... 6 5. PROGRAMMES..........................
ENGLISH 3 injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 General Safety • • • • • • • • • • • This appliance is intended to be used in household and similar applications such as: – farm houses; staff kitchen areas in shops, offices and other working environments; – by clients in hotels, motels, bed & breakfast and other residential type environments. Do not change the specification of this appliance.
www.electrolux.com • • • • instruction concerning use of the appliance in a safe way and understand the hazards involved. Do not let children play with the appliance. Keep all detergents away from children. Keep children and pets away from the appliance door when it is open. Cleaning and user maintenance shall not be made by children without supervision. 2. SAFETY INSTRUCTIONS 2.1 Installation • Remove all the packaging. • Do not install or use a damaged appliance.
ENGLISH Authorised Service Centre to replace the water inlet hose. 2.4 Use • Do not sit or stand on the open door. • Dishwasher detergents are dangerous. Obey the safety instructions on the detergent packaging. • Do not drink and play with the water in the appliance. • Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. • The appliance can release hot steam if you open the door while a programme operates.
www.electrolux.com 9 Detergent dispenser 10 Cutlery basket 11 Lower basket 12 Upper basket 4. CONTROL PANEL 1 2 6 1 2 3 4 On/off indicator Programme marker Indicators Delay button 3 5 4 5 Start button 6 Programme knob 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Drying phase. It comes on when the drying phase operates. End indicator. Salt indicator. It is always off while the programme operates. Rinse aid indicator.
ENGLISH 7 5. PROGRAMMES Programme 2) 3) 4) 5) Degree of soil Programme Type of load phases Consumption values 1) Duration (min) Energy (kWh) Water (l) 1.039 11 Normal soil Crockery and cutlery • • • • Prewash Wash 50 °C Rinses Dry 195 Heavy soil Crockery, cutlery, pots and pans • • • • Prewash Wash 70 °C Rinses Dry 140 - 160 1.3 - 1.5 13 - 15 Normal soil Crockery and cutlery • • • • Prewash Wash 65 °C Rinses Dry 100 - 120 1.2 - 1.
www.electrolux.com detrimental effect on the washing results and on the appliance. How to set the programme selection mode The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales. The appliance is in programme selection mode when the on/off indicator comes on and start indicator starts to flash. When you activate the appliance, usually it is in programme selection mode.
ENGLISH • The indicator starts to flash. • The indicators Start and on/off continues to flash. • The intermittent flashing of refers to the current set level, e.g. 5 flashes + pause + 5 flashes = level 5. 4. Press Delay again and again to change the setting. Each time you press Delay the level number increases. After level 10 you will start again from level 1. 5. Turn knob to on/off position to confirm the setting. 7. BEFORE FIRST USE 1.
www.electrolux.com 7.2 How to fill the rinse aid dispenser A D CAUTION! Only use rinse aid specifically designed for dishwashers. B C You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 or 6 (highest quantity). B A 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4.
ENGLISH A 30 B 11 Starting a programme with delay start D 20 C 1. Press the release button (B) to open the lid (C). 2. Put the detergent, in powder or tablets, in the compartment (A). 3. If the programme has a prewash phase, put a small quantity of detergent in the compartment (D). 4. Close the lid. Make sure that the release button locks into position. 1. Set the programme. 2. Press Delay to delay the start of the programme of 3 hours. The delay indicator comes on. 3. Press Start.
www.electrolux.com 9. HINTS AND TIPS 9.1 General The following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment. • Remove larger residues of food from the dishes into the waste bin. • Do not pre-rinse dishes by hand. When needed, use the prewash programme (if available) or select a programme with a prewash phase. • Always use the whole space of the baskets.
ENGLISH • Make sure that the spray arms can move freely before you start a programme. 9.5 Before starting a programme Make sure that: • The filters are clean and correctly installed. • The cap of the salt container is tight. • The spray arms are not clogged. • There is dishwasher salt and rinse aid (unless you use multi- tablets). • The position of the items in the baskets is correct. • The programme is applicable for the type of load and for the degree of soil.
www.electrolux.com CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 10.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. 10.3 External cleaning 5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
ENGLISH Authorised Service Centre, check if you can solve the problem by yourself with the help of the information in the table. 15 With some problems the end indicator flashes intermittently indicating a malfunction. Problem and alarm code Possible solution You cannot activate the appliance. • Make sure that the mains plug is connected to the mains socket. • Make sure that there is no damaged fuse in the fuse box. The programme does not start. • Make sure that the appliance door is closed.
www.electrolux.com Problem Possible solution There are stains and dry water drops on glasses and dishes. • The released quantity of rinse aid is not sufficient. Adjust the rinse aid selector to a higher position. • The quality of the rinse aid can be the cause. The dishes are wet. • The programme does not have a drying phase or has a drying phase with low temperature. • The rinse aid dispenser is empty. • The quality of the rinse aid can be the cause.
ENGLISH 17
www.electrolux.
ENGLISH 19
100003060-A-362014 www.electrolux.
