user manual Dishwasher ESF2450
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.
electrolux 3 Installation • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier. • Remove all packaging before first use. • A qualified and competent person must do the electrical installation. • A qualified and competent person must do the plumbing installation. • Do not change the specifications or modify this product. Risk of injury and damage to the appliance.
electrolux The rating label is on the back of appliance. Control panel 6 1 2 A B 3 5 4 C 7 1 2 3 4 5 6 7 On/off button Programme selection buttons Save energy button /(Saver) Delay start button Indicator lights Digital display Function buttons Indicator lights The indicator light comes on when the washing phase or the rinsing phase operates. The indicator light comes on when the drying phase operates. The indicator light comes on when the washing programme is completed.
electrolux 5 Indicator lights The indicator light comes on when it is necessary to fill the rinse aid. Refer to the chapter 'Use of rinse aid'. 1) 1) The indicator light is off when a washing programme operates. Delay start button Use the delay start button to delay the start of the washing programme with an interval between 1 and 19 hours. Refer to the chapter 'Setting and starting a washing programme'. The save energy function has no effect on some programmes.
electrolux • mmol/l (millimol per litre - international unit for the hardness of water). • Clarke. Adjust the water softener to the water hardness in your area. If necessary, contact your local water authority. Water hardness °dH mmol/l °TH Clarke Water hardness setting >24 >4.2 >40 > 28 5 18- 24 3.2- 4.2 32- 40 22- 28 4 12- 18 2.1- 3.2 19- 32 13- 22 3 4- 12 0.7- 2.1 7- 19 5 -13 2 <4 < 0.7 <7 <5 11) Digital display level 1) No use of salt required.
electrolux 7 It is normal that water overflows from the salt container when you fill it with salt When you set the water softener to level 1, the salt indicator light does not stay on. Use of rinse aid Caution! Only use branded rinse aid for dishwashers. Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). There is a risk of damage to the appliance. Rinse aid makes it possible to dry the dishes without streaks and stains.
electrolux • While you load cutlery and dishes, do these steps: – Load hollow items (e.g. cups, glasses and pans) with the opening down. – Make sure that water does not collect in the container or in a deep base. – Make sure that cutlery and dishes do not lie inside one another. – Make sure that cutlery and dishes do not cover other cutlery and dishes. – Make sure that glasses do not touch other glasses. – Put small objects in the cutlery basket.
electrolux 9 Fill with detergent Do these steps to fill the detergent dispenser: 1. Make sure that the detergent tablets are applicable for your water hardness. Refer to the instructions from the manufacturer. 2. Set the lowest levels of water hardness and rinse aid dosage. It is not necessary to fill the salt container and the rinse aid dispenser. A B 1. Open the lid of the detergent dispenser. 2. Fill the detergent dispenser (A) with detergent. 3.
electrolux Programme Degree of soil Type of load Normal or light soil Crockery and cutlery Programme description Main wash up to 50°C 1 intermediate rinse Final rinse Energy Save option1) Selectable, no impact on washing programme. 1) For programmes where the option has an impact, the energy saving is between 10% and 25%. 2) During the 'Auto' washing programme the level of soiling on the dishes is determined by how cloudy the water is.
electrolux 11 Fill the detergent dispenser with detergent before you set a new washing programme. Interrupting a washing programme Open the door. • The programme stops. Close the door. • The programme continues from the point of interruption. Setting and starting a washing programme with delay start 1. Press the on/off button. 2. Set a washing programme. 3. Press the delay start button until the display shows on flashing the necessary delay start of the washing programme.
electrolux Do these steps to remove the spray arm: 1. Turn the nut anticlockwise. 2. Remove the spray arm. 3. Fully clean the holes. Do these steps to clean the filters: 1. Open the door. 2. Remove the basket. 3. Remove the filters in the bottom of the appliance. 4. Clean the filters below running water. 5. Put the filters back. 6. Turn the microfilter clockwise to lock it. 7. Close the door. Cleaning the spray arm Regularly examine the spray arm. Remove remaining food from the holes in the spray arm.
electrolux 13 Fault code and malfunction Possible cause and solution • digital display shows • The water tap is blocked or furred with limescale. Clean the water tap. The dishwasher does not fill with wa• The water tap is closed. ter Open the water tap. • The filter in the water inlet hose is blocked. Clean the filter. • The connection of the water inlet hose is not correct. The hose can be kinked or squashed. Make sure that the connection is correct.
electrolux The cleaning results are not satisfactory Dry water drop signs on glasses and dishes • Increase rinse aid dosage. • The detergent can be the cause. Installation Warning! Make sure that mains plug is disconnected from the mains socket during installation. Fitting the appliance Put the appliance adjacent to a water tap and a drain. When you put the appliance in place, make sure that the water hoses are not kinked or squashed. Install the appliance on a kitchen sink, worktop or built-in..
electrolux 15 Connect the inlet hose to a water tap with an external thread of 3/4”. If the water inlet hose is too short, replace the water inlet hose with an applicable, longer high-pressure hose. Do not connect an extension hose. To suit the installation, it is possible to turn the end of the hose that is connected to the dishwasher. Do these steps : 1. Loosen the retaining nut. 2. Turn the hose. 3. Tighten the retaining nut.
electrolux Electrical connection Warning! The manufacturer is not responsible if you do not follow these safety precautions. Ground the appliance according to safety precautions. Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply. Always use a correctly installed shockproof socket. Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
electrolux 17
electrolux
electrolux 19
www.electrolux.
