operating instructions Control panel and inbuilt control unit ES-4E3
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Safety instructions.................................. Disposal................................................. Description of the Appliance .................. Before using for the first time ................. Operating the rings ................................ 3 4 5 5 6 5 Cleaning and Care................................. 8 Troubleshooting.....................................
electrolux 3 1 Safety instructions Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty. Electrical safety • The appliance may only be connected by a qualified service engineer. To ensure electrical safety inbuilt appliances must be installed in suitable built-in units that meet standards. • Only use the appliance when it has been installed in a unit. If these instructions are followed you will be safe from contact with electrical components.
electrolux Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. 2 Old appliance W on the product or on its The symbol packaging indicates that this product may not be treated as household waste.
electrolux 5 Description of the Appliance Control panel Ring indicator lights Control knob for front right cooking zone Control knob for back right cooking zone Control knob for back left cooking zone Control knob for front left cooking zone Before using for the first time Initial Cleaning If necessary remove any stickers and protective film from the appliance (not the rating plate). Remove slight soiling with a soft, clean, damp microfibre cleaning cloth and a mild cleaning agent.
electrolux Operating the rings Ring control knobs Control knobs for normal cooking zones or cast iron hotplates are turned to the right or left to positions 1 9 which will set the required power. Control knob for glass ceramic with two ring cooking zones 1 Caution! To switch on you must turn the knob to the right and you must not turn it beyond the stop symbol. To switch off turn the knob to the left. Small ring for normal cooking zones or cast iron hot plates – Turn the knob to the right.
electrolux 7 Reference values for cooking with rings 3 When warming or searing we recom- 2 mend that you set the appliance to setting 9 and then set it to the appropriate follow on cooking setting to finish cooking the food. Switch the oven off approx. 5-10 minutes before the end of the cooking process to make use of the residual heat. This will save electricity.
electrolux Cleaning and Care 1 Warning: For safety reasons, do not 1 clean the appliance with steam cleaners or high pressure cleaning equipment. Caution! Do not use corrosive cleaners, sharp objects or stain removers. The outside of the appliance • Wipe down the front of the appliance with a soft cloth and hot soapy water. • For metal fronts, use commercially available cleaning agents. Please do not use scouring powder or abrasive sponges.
electrolux 9 Installation instructions 1 Important! The new appliance may 1 only be installed and connected by qualified personnel. Please observe this instruction, otherwise the warranty will not cover any damage that may occur. Do not use the appliance if damaged.
electrolux 1 Safety instructions for the in• • • Installation staller ES-4E3 For protection against the risk of fire this appliance complies with Type Y (EN 60 335-2-6). Only appliances of this type may be installed up against tall units or walls on one side. Anti-shock protection must be provided by the installation Control panels, inbuilt control units and inbuilt hobs are fitted with special plug systems. They must only be combined with appliances with a suitable system.
electrolux 11 Detail C * * * * * SMS-Norm Cut out of unit It must be possible to remove the recess floor on site
electrolux Electrical connection ES-4E3 1. The appliance must be connected to the electricity supply by licensed installer. 2. For connecting the appliance directly to the mains a cable length of approximately 120 cm is provided. 3.
electrolux 13 Detail G Heating element circuit voltage 400 V
electrolux Garantie/Kundendienst, Garantie/service-clientèle, Garanzia/Servizio clienti, Guarantee/Customer Service Centres Servicestellen 5506 Mägenwil/Zürich Industriestrasse 10 9000 St.
electrolux 15 Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “Troubleshooting”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. In order to be able to assist you quickly, we require the following information: – – – Model description Product number (PNC) Serial number (S No.
www.electrolux.com www.electrolux.