User manual

operación electrolux 22
ESP
2 3
°C °C
1
Pantalla digital
Izquierda: Temperatura del congelador
Derecha: Temperatura del refrigerador.
Sensor Inteligente*
Presione el boton “Sensor inteligente”, la pantalla digital de temperatura
congelador y temperatura refrigerador empieza a parpadear. Presione el
boton Sensor inteligente de nuevo para que el refrigerador trabaje en
modo Sensor inteligente, la temperatura mostrada sera de 5℃ para el
refrigerador y -18℃ en el congelador. Para salir de esta funcion presione
“Sensor inteligente” de nuevo y regresar a la funcion previa.
Turbo congelamiento
Presione este botón para que el congelador funcione a máxima
capacidad de congelamiento por un tiempo específico. La pantalla
digital de temperatura del congelador muestra el tiempo de
1
2
3
Modelos solo con panel de control
After unpacking, install the bottom decoration cover onto the refrigeratory.
2. Switch-on
When switching-on, the refrigeratory enters the state of factory settings
automatically. This refrigeratory has the power-down memory function. After
the first switch-on, the refrigeratory will operate as per the settings at last
power-down.
3. Put foods into refrigeratory.
After electrifying and operation for a period of time (about 3-5 hours in
summer), the inner side of the refrigeratory is fully cool. Then, foods can be put
in and the refrigeratory can be used formally.
Tips: after the temperature setting has been changed or new food has been put
in, the inner temperature of the refrigeratory can reach a balance after a period
of time. And the length of the period is determined by the changing of
temperature setting, ambient temperature, opening frequency, amount of food
in the refrigeratory, etc.
Refrigerator
Though most places in the refrigerator can
be kept at 2-8℃ averagely by adjusting
temperature setting, the food in the
refrigerator cannot keep fresh for a long
time. Therefore, the refrigerator can only
serve to store food in short term.
Adjustment of shelf
According to the need of the food to be
stored, the shelf can be adjusted to a proper
height. To ease the use or adjustment of the
shelf, it is designed for sliding; when
cleaning the glass shelf, please pull the
glass shelf in the direction 1 and whirl it in
the direction 2 at the same time until it is
perpendicular to the original position, and
then take it out at 90° in the direction 3.
Adjustment and cleaning of door tray
Hold two sides of the tray, lift it up in the ①
direction, and pull it out in the direction ②.
After cleaning, install the tray in opposite
directions. The installation place can be
adjusted according to the height of the food.
1
2
1
2
3
ENG
41 electrolux installation