User manual

Configuración de la temperatura del congelador
Función:
Ajuste la temperatura del congelador en el siguiente rango: -16°C -24 °C -1°C
cambia cada vez que se empuja.
Operación:
Regulación de la temperatura: Pulse el botón Temperatura del Congelador
una vez, y el icono de los flashes del congelador. Pulse el botón otra vez para
ajustar la temperatura. (El ciclo de la orden de ajuste es el la temperatura actual
-16 –…..…..-24 - 16) El ajuste empezará después de 5 segundos de ajustar la
temperatura.
Turbo Refrigeración: Pulse este botón, y el indicador de parpadeo rápidos de
enfriamiento, que indica el modo de enfriamiento rápido. Los iconos relevantes
y parpadeo de palabras. Presione el botón de desbloqueo para confirmarlo.
Turbo Congelador: Pulse este botón, y el indicador de parpadeo rápidos de
congelación, que indica el modo de congelamiento rápido. Los iconos
relevantes y parpadeo de palabras. Presione el botón de desbloqueo para
confirmarlo.
Pulse de nuevo el botón Turbo Congelador cuando el icono de congelación
rápida parpadee, el tiempo de modo de congelación mostrado por el
congelador cambia en ciclos de 6h-8h-12h-24h-48h- y sale del modo de
congelación rápido. Pulse el botón Traba para confirmar y el parpadeo se
detendrá.
Turbo Congelador: Su objetivo de diseño es para mantener el valor nutricional
de los alimentos congelados. Los alimentos pueden ser perfectamente
congelados en el tiempo más corto. Si necesita congelar una gran cantidad de
alimentos en un tiempo, se recomienda configurar rápidamente la función de
congelación con 12h de anticipación, para que el congelador pueda volver a
una baja temperatura, y poner dentro la comida. En ese momento, la capacidad
de congelación acelera, la comida se congela rápidamente y bloquea la
nutrición de la comida eficazmente.
ESP
19 electrolux operación
Modelos con dispensador de agua/hielo
2
1
3
4
5
6
7
8
2
3
4
109
5.The noises for de-icing, motor operation, dropping of ice into the ice storage,
and operation of water supply valve may not happen periodically. They are not
errors.
6.Please use the button on/off on the distributor to turn off the ice-making function
when it is not required. The ice maker is sold under ON state. If unnecessary,
please turn off this function timely after installation of the refrigeratory. When the
ice-making function is turned on without connection of waterways, there are
operational noises of water supply valve.
7.When ice piece is smaller than usual in a certain period of time, please verify the
replacement frequency of the filter. When the filter reaches its operation time,
the water supply pressure is lower and the made ice piece is smaller.
8.When cleaning the ice storage box, turn off the ice-making function on the
distributor before detaching the ice storage box.
9.Do not whirl the Auger during reinstallation of the removed ice storage box. After
being whirled, the Auger cannot be assembled and installed normally. It may be
damaged when taking out the ice. Whirl the Auger left and right after it has been
whirled to ensure normal installation.
Supply of ice (only some models)
1.Choose the ice/ water button on the display
board, select entire or crushed ice pieces and
make sure the relevant indicator turns on.
2.Use the container to push and hold the switch
plate to get ice.
3.According to the water supply condition,
some mixed small ice pieces may come out
when getting the entire ice pieces.
4.When crushed ice pieces are required, please
press the container most close to the ice
discharging orifice to prevent the crushed ice
from dropping out.
5.When getting ice, the noises of motor,
crushing ice and so on are normal.
6.To protect the motor, the refrigeratory will stop
when the switch plate is pushed for 1 minute
or more. Then, releasing the switch plate and
waiting a moment, you can get ice normally
again. When large amount of entire ice pieces
are required, please open the door of freezer,
take the ice storage box out and use the ice in
it.
ENG
usage instructions electrolux 44