ERF3867SOX ................................................ .............................................
www.electrolux.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 3 SAFETY INSTRUCTIONS In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
www.electrolux.com 2. • • • • Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable. 5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. 6. You must not operate the appliance without the lamp cover (if foreseen) of interior lighting.
ENGLISH obtain from your local authorities. Avoid damaging the cooling unit, especially at the rear near the heat 5 exchanger. The materials used on this appliance marked by the symare recyclable. bol 2. CONTROL PANEL 1 2 3 11 4 10 5 9 6 7 8 1 Temperature button 9 Still cold water 2 Display 10 ChildLock button 3 ON/OFF button 11 Mode button It is possible to change predefined sound of buttons to a loudly one by pressing together Mode button and Temperature colder button for some seconds.
www.electrolux.com A) B) C) D) E) F) G) H) I) J) ExtraHumidity mode Temperature indicator Water choice indicator Water circuit cleaning Alarm indicator Water filter indicator ChildLock mode ShoppingMode EcoMode HolidayMode 2.2 Switching on To switch on the appliance do these steps: 1. Connect the mains plug to the power socket. 2. Press the ON/OFF button if the display is off. 3. If DEMO appears on the display, the appliance is in demonstration mode. Refer to "What to do if..." paragraph. 4.
ENGLISH Mode button until you can see none of the special icons The function switches off by selecting a different set temperature. 2.8 Extra Humidity Mode If you need to increase the humidity in the refrigerator, we suggest activating the Extra Humidity function. To switch on the function: 1. Press the Mode button until the corresponding icon appears. To switch off the function: 1.
www.electrolux.com 2.16 Water circuit cleaning If you need to clean the water system. 1. Press the Mode button until the corresponding icon appears. 2. After a few seconds the Still cold water indicator goes on. Water select locked into Still cold water. 3. Dispensing water in total 2 minutes. The water system is cleaned. The Water circuit cleaning and the Still cold water indicator goes off. To switch off the function before its automatic end: 1.
ENGLISH 9 3.4 Movable shelves The walls of the refrigerator are equipped with a series of shelves support so that the shelves can be positioned as desired. Some shelves must be lifted up by the rear edge to enable them to be removed. The shelf (A) above the water module is recommended to be placed as shown for good air circulation. A Do not move the glass shelf above the vegetable drawer to ensure correct air circulation. 3.
www.electrolux.com 3.7 Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish. Check that the drain hose at the rear of the cabinet discharges into the drip tray 4. HELPFUL HINTS AND TIPS 4.
ENGLISH too cold, change to a higher temperature setting. Do not place food against or close to the temperature sensor (A). This can result in too cold temperatures. 11 • If you want to check the temperature of food stored in the refrigerator, place a glass of water centrally in the cabinet, and put a proper thermometer with an accuracy of +/– 1 °C into it. After 6 hours the temperature can be monitored. The measuring shall be performed under steady-stated conditions (without changing the load). A 5.
www.electrolux.com 5.3 Replacing the gas cylinder Remove the gas cylinder, refer to "Installation of the gas cylinder". The replacement gas cylinder is obtained through your local dealer. 5.4 Cleaning the water dispenser When necessary, clean the surfaces of the dispenser, using only a soft cloth and warm water. The dispenser drip tray can be cleaned with a lukewarm water and some neutral soap. Lime deposits on the dispenser surface can removed using vinegar or diluted acetic acid as cleaning agent.
ENGLISH The operation of the appliance goes with certain sounds (compressor and circulating sound). This not means a trouble, but a normal operation. 13 The appliance operates discontinuously, so the stopping of compressor does not mean being no current. That is why you must not touch the electrical parts of the appliance before breaking the circuit. Problem Possible cause Solution The appliance is noisy. The appliance is not supported properly.
www.electrolux.com Problem Possible cause The temperature in the appliance is too cold. The Temperature regulator Set a warmer temperature. may be set incorrectly. The temperature in the appliance is too warm. The Temperature regulator Set a lower temperature. may be set incorrectly. The temperature in the refrigeration is too warm. The appliance does not operate. Solution The door is not closed correctly. Refer to "Closing the door". The food temperature is too high.
ENGLISH 15 Problem Possible cause Solution The water filter indicator lights constantly. Time out. Refer to "Water filter indicator". The Water circuit cleaning and Still cold water indicator is shown. No water has been dispensed in 10 days. Dispense water in total 2 minutes and the icons goes off. The buzzer sounds. The Alarm icon and ExtraHumidity icon flashing. Failed water supplies. Press any button to reset the alarm. Select Still cold water and push the paddle and release.
www.electrolux.com 7. INSTALLATION WARNING! Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance. 7.1 Positioning Install this appliance at a location where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance: Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C 7.2 Location 50 mm 7.
ENGLISH 17 7.4 Removing the transport support Your appliance is equipped with transport support to secure the door during transportation. To remove them do these steps: • Open the door. • Remove the transport support (2) from the door sides. • Remove the transport support (3) from the lower hinge (some models). 3 2 • Remove the transport support (4) from underneath the water unit. • Cut the pump securing tie (5) and remove it. 5 Some models are fitted with a silencing pad under the cabinet.
www.electrolux.com 7.6 Connecting the water hose. Water supply should be provided with a tap and 3/4" male connector within 1,5 m from the appliance. This work is to be carried out by a skilled plumber. There are different type-approved taps and tap assemblies on the market. The water hose must not be cracked, squeezed or put in tight bends. The safety valve provided in a package inside the appliance should be used to prevent overflow.
ENGLISH 19 • Insert the filter in the slot found in the back of the air lever flap. • Close the air lever flap. The filter should be handled carefully so fragments do not loosen from the surface. Make sure that the air lever flap is closed to obtain proper function. 1. Open the tap on the water connection. 2. Start the refrigerator. The water system main valve opens and the pump starts to fill the system. 7.9 Starting the water system for the first time.
www.electrolux.com 4 • Then turn the lever upwards in one continuous movement. 3 7.11 Door reversibility In case you want to change the opening direction of the door, contact the nearest After Sales Service Force. The After Sales Service specialist will carry out the reversibility of the doors at your cost. 8. NOISES There are some sounds during normal running (compressor, refrigerant circulation).
ENGLISH HISSS! BLUBB! HISSS! BLUBB! BRRR! CRACK! 9. TECHNICAL DATA Dimension Height 1800 mm Width 595 mm Depth 650 mm Voltage 230 V Frequency 50 Hz The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label.
www.electrolux.com Water pressure range The water pressure must be at least 1 bar (100kPa) Consult your installer if water pressure is less than 1 bar. Highest allowed water pressure 10 bar (1000kPa) If water pressure exceeds 10 bar a reduction valve must be fitted (available from your specialist shop). Capacity 50-80 litres of carbonated water per cylinder. • Do not connect the appliance in spaces where ambient temperature can decrease to below freezing.
ENGLISH 23
298376981-B-462012 www.electrolux.
