Dear customer, Before placing your new refrigerator/freezer into operation please read these operating instructions carefully. They contain important information for safe use, far installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
Important Safety Instructions Environmental Information Packaging Old Appliances Before Use Packaging Installation Installation Location Installation Electrical Connection Description of the appliance View of the Appliance Prior to Initial Start-Up Initial Use Switching off the Appliance Defrosting The Fridge Defrosts Automatically Hints and Tips Normal Operating Sounds Food Storage Energy Saving Advice Maintenance and Cleaning Internal Cleaning External Cleaning Content 4 Something not Working Replace Ligh
A Important Safety Instructions These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. i you are unsure about any of the meanings or these warnings contact the Customer Care Department. Prior to Installation » Check the refrigerator for transport damage. Under no circumstances should a damaged appliance be installed! In the event of damage, please contact your retailer.
Environmental Information Packaging All transit packaging materials are environmentally compatible and can be reused. Wood is untreated. The plastics can be recycled and are identified as follows: >PE« for polyethylene, e.g. the outer covering and the bags in the interior. =P8« for polystyrene foam, e.g. the pads, which are pure hydrocarbon compounds and can be recycled. The carton parts are made from recycled paper. Please dispose of the packaging with due care for the environment.
Installation Installation Location The appliance should be installed in a well ventilated, dry room. Energy use is affected by the ambient temperature. The appliance should therefore — not be exposed to direct sunlight; — not be installed next to radiators, cookers or other sources of heat; only be installed at 4 location whose ambient temperature corresponds o the climate classification, for which the appliance is designed.
Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. A WARNING — THIS APPLIANCE MUST BE EARTHED The manufacturer declines any ability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the left. The appliance is supplied with a 13 amp plug fitted.
Prior to Initial Start-Up I Please clean the appliance interior and all accessories prior to initial start-up (see section: “Maintenance and Cleaning”). Initial Use Important! Only use the appliance when correctly installed! BE Plug the mains plug into the mains socket. When the door is opened the interior lighting comes Light switch 2 Temperature regulator and ON/OFF switch The temperature regulator is alas the ON/OFF switch. The large oval switch beside the temperature regulator is the light switch.
Switching off the appliance 1 To switch off the appliance, turn the temperature regulator to position "0". 1557 |f the door is to left open for an extended period, switch off the interior lighting by turning the temperature regulator to position "Q". Defrosting The fridge defrosts automatically The rear wall of the fridge covers with frost when the compressor is running, and defrosts when the compressor is off.
Maintenance and Cleaning Before any maintenance or cleaning work is carried out DISCONNECT the appliance from the ELECTRICITY supply. Internal Cleaning EE Clean the inside and accessories with warm water and bicarbonate of soda liter of water). Rinse and dry thoroughly. AN Warning! Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or cleaning products containing bleach or alcohol.
Symptom The food is too warm. Interior lighting does not work. Heavy build up of frost, possibly also on the door seal. Unusual noises. The compressor dos not stat immediately after changing the temperature selling Warier on the fur of on storage shelves Replace light bulb Possible Cause Temperature is not properly adjusted. Door was open for an extended period. A large quantity of warm food was placed in the appliance within the last 24 hours. The appliance is near a heat source. Light bulb is defective.
Customer Service If you cannot find the remedy for a malfunction in these operating instructions, please contact your dealer or our customer service department. Addresses and telephone numbers are listed in the accompanying booklet "Guarantee Conditions/Customer Service Locations”. Selective ordering of replacement pairs can save unnecessary travel and costs.
Technical Terminology Refrigerant Liquids that can be used 10 a generate a cooling effect are known as refrigerants. They have a relatively low boiling-point, indeed so low, that the warmth from the food stored in the fridge or freezer can cause the refrigerant to boil and vaporize. Refrigerant Circuit Closed circulation system that contains the refrigerant. The refrigerant circuit comprises primarily of an evaporator, a compressor, a condenser and pipe work.
Guarantee Conditions ELECTROLYTE offer the following guarantee to the first purchaser of this appliance: 1. The guarantee is valid for 12 month commencing when the appliance is handed over to the first retail purchaser, which must be verified by purchase invoice or similar documentation. The guarantee does not cover commercial use. 2. The guarantees covers all parts or components which fail due to faulty workmanship or faulty materials.
