Specifications

Series 24 Lighted Nameplates
The Series 24 family of Manual and Remotely Operated Switches are Now Available with Built-
In, Cost-Effective, Long-Life LED Indicators. The Series 24 Switch, the Utility Industry Standard
for Quality and Reliability is Now a Better Value Than Ever!
Benefits
• Saves Panel Space
• Reduces Purchase and Installation Cost
• Easy to Use… No Special Operator Training
• Provides Local and Remote (SCADA) Annunciation of Breaker Trip Coil Failure
Features
• Can be used on ALL Series 24 Switches
• Is Available with One, Two or Three Replaceable LEDs
• Flexible Circuitry lets LEDs be Wired to Indicate Any Desired Event
• Is Available With or Without a Mechanical Target
• 125VDC Unit Covers IEEE 48V/125V Ranges (38 to 140VDC)
• AC Unit Available
• Saves Panel Space by Fitting up to 3 LEDs into the Standard Series 24 Nameplate Footprint
• Allows Monitoring of Breaker Trip Coil with Local (Center LED) and SCADA Annunciation
• Model Available to Simultaneously Monitor Two Independent Isolated Trip Coils
• Uses Large LEDs that:
– Are Brighter than the Typical Incandescent Bulb
– Have an 11 Year Life (Typical)
– Are Socket Mounted for Design Flexibility and
Easy Front of Panel Field Replacement
– Are More Rugged than Incandescent Bulbs
– Are Available in Red, Green, Amber, Blue and White
– Each LED Draws Less than 10mA when Lit
Approvals
• UL File No. E18174 • CSA •
Ordering Information
Part Numbers for the Series 24 Switches with Lighted Target Nameplate are fairly simple. Find the part
number of the product you wish to order in the Electroswitch catalog, then simply add a two letter code
after the second digit in its part number. The first letter of the code will always be “ P “ indicating a
Lighted Target Nameplate. The second letter will change depending on the options as follows.
A = Single LED, Amber, 48/125VDC E = Single LED, Amber, 120VAC
B = Two LEDs, Green/Red, 48/125VDC F = Two LEDs, Green/Red, 120VAC
C = Three LEDs, Green/Amber/Red, 48/125VDC G = Three LEDs, Green/Amber/Red, 120VAC
D = Three LEDs, Green/Red/Red, 48/125VDC
(Dual Trip Coil Monitor)
Consult factory for 24VDC, 250VDC, and special configurations.
Example One:
A Series 24 Breaker Control Switch with circuit number 38 and a pistol grip handle is part number 2438D.
The same Breaker Control Switch with a Lighted Target Nameplate, three LEDs, and 120VAC LED voltage
would become part number 24PG38D.
Example Two:
A Series 24 Control Switch Relay with standard circuit number 57, 48VDC relay operating voltage, and con-
trol circuit “C” is part number 8857CC. The same Control Switch Relay with a Lighted Target Nameplate,
Three LEDs, and 48/125VDC LED voltage would become part number 88PC57CC.
Electroswitch • 180 King Avenue • Weymouth, MA 02188 • TEL: [phone] • FAX: [phone] • www.electroswitch.com
12
SERIES 24
“Smart” Lighted Nameplate
NEW
PRODUCT
Examples of “Smart” Lighted Nameplate Switches and the Matching Lighted Indicator Nameplate
Decks
1
2
3
4
5
6
7
8
9
10
Depth
3.06
3.43
4.18
4.93
5.31
6.06
6.81
7.18
8.06
8.68
Depth Behind Panel