Einbau-Herd Built-under oven EON 3701 Bedienungs- und Einbauanweisungen Instruction booklet
English Warnings - Built-under ovens It is most important that the instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. These warnings are provided in the interest of safety.
Technical assistance z z This appliance should be serviced by an authorized Network Service Centre, and only genuine spare parts should be used. Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts.
Description of the appliance 9 8 7 6 5 4 3 2 1 10 11 12 1. Control Panel 2. Front right hotplate/cooking zone control knob 3. Rear right hotplate/cooking zone control knob 4. Rear left hotplate/cooking zone control knob 5. Front left hotplate/cooking zone control knob 20 6. 7. 8. 9. 10. 11. 12.
Electric oven Oven Function (Fig. 2) and Thermostat (Fig. 3) control knobs They enable to select the most appropriate type of heating for the different cooking requirements by appropriately connecting the heating elements and adjusting temperature to the required level. 0 OFF position Oven Light - The oven light will be on without any cooking function. Fig. 2 Conventional cooking - The heat comes from both the top and bottom element, ensuring even heating inside the oven.
Hotplate control knobs The Control Knobs for the hotplates (Fig. 4) can be found on the oven control panel. The energy regulator of the hotplates can be set by means of a 7-position control knob: 0 = Off 1 = Minimum 3 = Maximum The intermediate positions give an increasing heating power. Carefully supervise cookings with oil or fats, since these types of food can result in a fire, when over-heated.
Hints and tips for using the oven Always cook with the oven door closed. The oven is supplied with an exclusive system which produces a natural circulation of air and the constant recycling of steam. This system makes it possible to cook in a steamy environment and keep the dishes soft inside and crusty outside. Moreover, the cooking time and energy consumption are reduced to a minimum. During cooking steam may be produced which can be released when opening the oven door. This is absolutely normal.
raw dough or mix should therefore be fairly difficult to detach from the spoon or beater. If three shelves are filled with cakes and tarts simultaneously, it is advisable to slot in an extra shelf between the two lower shelves (Fig. 5). For cooking meat and fish Meat cooked in the oven should weigh at least 1 kg to prevent it from becoming too dry during cooking. Very tender red meat to be cooked rare, i.e.
Cooking Tables Weight (gr.
Grilling (**) TYPE OF DISH 4 3 2 1 Pieces Weight Level Fillet steaks Beef-steaks Sausages Pork chops Chicken (cut in two) Kebabs Chicken (breast) Hamburger Fish (fillets) Sandwiches Toast 4 4 8 4 2 4 4 6 4 4-6 4-6 800 600 — 600 1000 — 400 600 400 — — Cooking time (minutes) Grilling Quantity 3 3 3 3 3 3 3 3 3 3 3 temp.
Models in stainless steel or aluminium: We recommed to clean the oven door using only a wet sponge and dry it up after cleaning with a soft cloth. Never use steel wool, acids or abrasive products as they can damage the oven surface. Clean the oven control panel following the same precautions.
What happens if something goes wrong If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Centre. SYMPTOM SOLUTION The oven does not come on Check the oven is in manual operation and that both a cooking function and a temperature have been selected. or Check the appliance is wired in properly, and the socket switch or the switch from the mains supply to the oven are ON.
Service and Spare Parts If after the checks listed in the previous chapter, the appliance still does not work correctly, contact your local Service Centre, specifying the type of malfunctioning, the appliance model (Mod.), the product number (Prod. No.) and the serial number (Ser. No.) marked on the identification plate. This plate is placed on the front external edge of the oven cavity.
Instructions for the installer The instructions given below are designed specifically for a qualified installer and should aid him or her to perform all installation, adjustment, and maintenance operations with absolute precision and in compliance with all current legislation and regulations. We strongly recommend that all operations for the installation of your cooker be carryed out by Qualified Personnel in accordance with existing rules and regulations.
Electrical connection with the hob Building-in To ensure correct operation of the built-in assembly, the kitchen cabinet and the recess for the built-in appliance must have suitable dimensions. When the appliance is fitted-in, there must be no open spaces left and it must be closed on all sides by the kitchen furniture to prevent the possibility of inadvertently touching “live” (current carrying) parts of the oven.
