electrolux 1 user information ZA Built-under EON 21001
electrolux 3 Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine.
electrolux Contents Warnings and Important Safety Information ........................................................ 5 Description of the appliance............................................................................... 7 Controls............................................................................................................. 8 Before using the oven for the first time ............................................................. 10 Using the Oven .....................................
electrolux 5 Warnings and Important Safety Information Always keep these user instructions with the appliance. Should the appliance be passed on to third persons or sold, or if you leave this appliance behind when you move house, it is very important that the new user has access to these user instructions and the accompanying information. These warnings are provided for the safety of the users and those living with them. So read them carefully before connecting and/or using the appliance.
electrolux • Make sure that the oven is in the “OFF” position, when the oven is no longer being used. • This oven was made as a single appliance or as a combination appliance with electrical hotplate, depending on the model, for singlephase connection to 230 V. • The appliance must not be cleaned with a superheated steam cleaner or a steam jet cleaner. • Do not use abrasive cleaners or sharp metal scrapers. These can scratch the glass in the oven door, which may result in the shattering of the glass.
electrolux 7 Description of the appliance 7 2 3 45 6 7 1 8 9 10 11 1. 2. 3. 4. 5. 6. Control panel Oven thermostat control knob Oven thermostat control light Minute Minder Operating control light Oven function control knob 7 . Hotplate control knobs 8 . Air Vents for Cooling Fan 9 . Grill 10. 10.Oven lamp 11. 11.
electrolux Controls Oven Function Control Knob 0 The oven is off Conventional cooking - The heat comes from both the top and bottom element, ensuring even heating inside the oven Bottom heating element - The heat comes from the bottom of the oven only Top heating element - The heat comes from the top element only (outer section) Inner grill element only - Can be used for grilling small quantities Full Grill - The full grill element will be on Mains on Indicator The mains on light will come on when the
electrolux 9 Hotplate control knobs The Control Knobs for the hotplates can be found on the oven control panel. The energy regulator of the hotplates can be set by means of a 10-position control knob: 0 = Off 1 = Minimum 9 = Maximum The intermediate positions give an increasing heating power. Double circuit cooking zone If you wish to have the two electric circuits work simultaneously, turn the knob to Max position (9) and then turn it towards symbol “0”. You will hear a click.
electrolux Before using the oven for the first time Remove all packaging, both inside and outside the oven, before using the oven. Before using for the first time, the oven should be heated up without food. During this time, an unpleasant odour may be emitted. This is absolutely normal. It is caused by manufacturing residues. Ensure the room is well ventilated. 1. Switch the oven function control knob to conventional cook- Then let the oven cool down.
electrolux 11 Using the oven The oven is supplied with an exclusive system which produces a natural circulation of air and the constant recycling of steam. This system makes it possible to cook in a steamy environment and keep the dishes soft inside and crusty outside. Moreover, the cooking time and energy consumption are reduced to a minimum. During cooking steam may be produced which can be released when opening the oven door. This is absolutely normal.
electrolux reflect the heat away and give less base browning. - Always place dishes centrally on the shelf to ensure even browning. - Stand dishes on suitably sized baking trays to prevent spillage onto the base of the oven and make cleaning easier. - Do not place dishes, tins or baking trays directly on the oven base as it becomes very hot and damage will occur.When using this setting, heat comes from both the top and bottom elements.
electrolux 13 Inner Grill Element The inner grill provides quick direct heat to the central area of the grill pan. By using the inner grill element for cooking small quantities, it can help to save energy. 1. Turn the oven control function knob . on 2. Turn the thermostat control knob on the required temperature. 3. Adjust the grid and grill pan runner position to allow for different thicknesses of food and follow the instructions for grilling. The grill element is controlled by the thermostat.
electrolux depressed, it is cooked through. Roast beef and fillet, which is to remain pink inside, must be roasted at a higher temperature in a shorter time. If cooking meat directly on the oven shelf, insert the roasting pan in the shelf level below to catch the juices. Leave the joint to stand for at least 15 minutes, so that the meat juices do not run out. To reduce the build up of smoke in the oven, it is recommended to pour a little water in the roasting pan.
electrolux 15 Baking and Roasting Table Conventional Cooking Timings do not include pre-heating. The empty oven should always be pre-heated for 10 minutes.
electrolux Grilling - Timings do not include pre-heating. The empty oven should always be pre-heated for 10 minutes. Quantity TYPE OF DISH Pieces Fillet steaks Beef-steaks Sausages Pork chops Chicken (cut in two) Kebabs Chicken (breast) Hamburger* *Preheat 5’00'’ Fish (fillets) Sandwiches Toast Grilling g. 4 3 2 1 temp.
electrolux 17 Cleaning and Maintenance Before cleaning switch the oven off and let it cool down. The appliance must not be cleaned with a superheated steam cleaner or a steam jet cleaner. Cleaners that contain bleach should NOT be used as they may dull the surface finishes. Harsh abrasives should also be avoided.
electrolux Oven Shelves Supports and Shelf To clean the oven shelves, soak in warm soapy water and remove stubborn marks with a well wetted soap impregnated pad. Rinse well and dry with a soft cloth. The shelf supports can be removed for easy cleaning. Proceed as follows: 1. remove the front screw while keeping the shelf support in position with the other hand; 2. disengage the rear hook and take off the shelf support; 3.
electrolux 19 Cleaning the oven door The oven door consists of two panes of glass. The oven door can be disassembled and the internal panes can be removed to make cleaning easier. ) Important - Remove the oven door before cleaning it. The oven door could abruptly close if you try to remove the internal panes of glass when the door is still assembled. Fig. 1 To do so, proceed as follows. 1) open the door fully; 2) locate the two door hinges (Fig. 1); 3) lift and turn the levers on the two hinges (Fig.
electrolux 6) place the door on a stable surface (Fig. 4) protected by a soft cloth to prevent the handle surface from being damaged; 7) release the locking system to remove the internal panes of glass (Fig. 5); 8) turn the 2 fasteners 90° and extract them from their seats (Fig. 6); 9) gently lift and carefully take off the uppermost pane marked by a decorative frame on 4 sides (Fig. 7). Fig. 4 Clean the oven door with lukewarm water and a soft cloth.
electrolux 21 The internal pane of glass must be put back into the right seats as shown in Fig. 8. After the panes of glass have been reassembled in the oven door, perform the procedure described in point 8) in reverse to ensure they are locked. Do not clean the oven door when it is still hot, as the glass could shatter. If scratches or deep cracks are noted on the surface of the glass, contact the authorised Assistance Centre for replacing the glass.
electrolux Replacing The Oven Light Disconnect the appliance If the oven bulb needs replacing, it must comply with the following specifications: - Electric power: 15 W/25 W, - Electric rate: 230 V (50 Hz), - Resistant to temperatures of 300°C, - Connection type: E14. These bulbs are available from your local Service Force Centre. To replace the faulty bulb: 1. Ensure the oven is isolated from the electrical supply. 2. Push in and turn the glass cover anticlockwise. 3.
electrolux 23 If something is wrong If the appliance is not working correctly, please check the following before contacting the Electrolux Service Centre: PROBLEM SOLUTION The oven is not switching on. Check that both a cooking function and temperature have been selected or Check whether the appliance is correctly connected and the socket switch or the mains supply to the oven is ON. The oven temperature light does not come on.
electrolux Technical Data Heating element ratings Bottom oven element 1000 W Top heating element 800 W Full oven (Top+Bottom) 1800 W Grill 1650 W Full grill 2450 W Oven light 25 W Cooling Fan 25 W 2500 W Total rating Operating voltage (50 Hz) under top mm 593 Width mm 560 Depth mm 550 Oven Height mm 335 Width mm 395 Depth mm 400 Oven capacity Traditional Hobs Type: EHE 60020 Maximum powerabsorbed 7000 W Power supply voltage (50Hz) 230 V Ceramic hobs Type: EHC 60060 Maximum po
electrolux 25 Instructions for the installer The instructions given below are designed specifically for a qualified installer and should aid him or her to perform all installation, adjustment, and maintenance operations with absolute precision and in compliance with all current legislation and regulations. We strongly recommend that all operations for the installation of your cooker be carryed out by Qualified Personnel in accordance with existing rules and regulations.
electrolux Connecting the terminal board The appliance incorporates an easily accessible 6-pole terminal board whose jumpers (bridges) are already pre-set for operation on 400V tri-phase with neutral wire. In case a different mains voltage is present, the jumpers on the terminal board must be rearranged as shown in the diagram. The ground cable must be connected to terminal . After connecting the supply cable to the terminal board, secure it with a junction clamp.
electrolux 27 Instructions for Building In Oven dimensions (Fig. A) Instructions for Building In For problem-free functioning of the builtin appliance, the kitchen unit or the recess into which the appliance is built must have suitable dimensions (Fig. B). Fig. A 550 M 560 IN - 57 593 For problem-free functioning of the builtin appliance, the kitchen unit or the recess into which the appliance is built must have suitable dimensions.
electrolux Securing the Appliance to the Cabinet - Open the oven door; fasten the oven to the cabinet placing the four distance holders provided with the appliance (Fig.C - A) which fit exactly into the holes in the frame and then fit four wood screws (Fig. C - B). When installing a hob over the oven, the hob electrical connection and the oven one have to be carried out separately for security reasons and to let the oven be taken off the cabinet easier, if necessary.
electrolux 29
EON 21001 0.79 kWh 56 43 min.
electrolux 35698-1002 04/08 R.
