User manual

Problem Possible cause Remedy
The display shows C3. You want to start the py-
rolytic cleaning but you
did not fully close the
door.
Fully close the door.
The display shows F102. The door lock is defec-
tive.
• Fully close the door.
• Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows
F102 again, contact
the Customer Care De-
partment.
The display shows an er-
ror code that is not in this
list.
There is an electrical fault. • Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows the
error code again, con-
tact the Customer Care
Department.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
13. INSTALLATION
WARNING!
Refer to the Safety chapters.
The built-in unit must meet the
stability requirements of DIN
68930.
ENGLISH 31