User manual

8.1 Using the turnspit
WARNING!
Be careful when you use the
turnspit. The forks and the
spit are sharp. There is a risk
of injury.
WARNING!
Use oven gloves when you
remove the turnspit. The
turnspit and the grill are hot.
There is a risk of burns.
A B
D
C
A. Turnspit frame
B. Forks
C. Spit
D. Handle
1. Put the turnspit handle into the spit.
2. Put the deep pan on the lowest shelf
position.
3. Put the spit frame on the third shelf
position from the bottom.
4. Install the first fork on the spit, then
put the meat on the turnspit and
install the second fork.
5. Use the screws to tighten the forks.
6. Put the tip of the spit into the
turnspit hole.
7. Lay the back side of the spit on the
turnspit frame.
Refer to "Product description"
chapter.
8. Remove the turnspit handle.
9. Select a function with the turnspit
position. The turnspit rotates.
10. Ignite the grill burner. Refer to the
cooking tables.
8.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Baking tray:
Push the baking tray between the guide
bars of the shelf support.
www.aeg.com
14