User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. PRODUCT DESCRIPTION
- 4. CONTROL PANEL
- 5. BEFORE FIRST USE
- 6. DAILY USE
- 7. CLOCK FUNCTIONS
- 8. AUTOMATIC PROGRAMMES
- 9. USING THE ACCESSORIES
- 10. ADDITIONAL FUNCTIONS
- 11. HINTS AND TIPS
- 11.1 Cooking recommendations
- 11.2 Advice for special heating functions of the oven
- 11.3 Full Steam
- 11.4 Turbo Grilling and Full Steam combined
- 11.5 Humidity High
- 11.6 Humidity Low
- 11.7 Steam Regenerating
- 11.8 Baking
- 11.9 Tips on baking
- 11.10 Baking on one level
- 11.11 Bakes and gratins
- 11.12 Moist Fan Baking
- 11.13 Multilevel Baking
- 11.14 Crispy baking with Pizza Setting
- 11.15 Roasting
- 11.16 Roasting
- 11.17 Grill
- 11.18 Frozen Foods
- 11.19 Slow Cooking
- 11.20 Preserving
- 11.21 Drying
- 11.22 Bread Baking
- 11.23 Food Sensor table
- 11.24 Information for test institutes
- 11.25 Information for test institutes
- 12. CARE AND CLEANING
- 12.1 Notes on cleaning
- 12.2 Recommended cleaning products
- 12.3 Removing the shelf supports
- 12.4 Steam Cleaning
- 12.5 Cleaning Reminder
- 12.6 Steam generation system - Descaling
- 12.7 Descaling reminder
- 12.8 Steam generation system - Rinsing
- 12.9 Tank Emptying
- 12.10 Removing and installing the door
- 12.11 Replacing the lamp
- 13. TROUBLESHOOTING
- 14. ENERGY EFFICIENCY

Refer to the cleaning function: Tank
Emptying.
CAUTION!
The oven is hot. There is
a risk of burns.
9. After Steam Cooking steam can
condensate on the bottom of the
cavity. Always dry the bottom of the
cavity when the oven is cool.
Let the oven dry fully with the door open.
To speed up the drying you can close the
door and heat up the oven with the
function: True Fan Cooking at
temperature 150°C for approximately 15
minutes.
6.9 Heat-up indicator
When you turn on a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
When temperature is reached the buzzer
sounds 3 times and the bar flashes and
then disappears.
6.10 Fast Heat Up
This function decreases the heat-up
time.
Do not put food in the oven
when the Fast heat up
function works.
To turn on the function, hold for 3
seconds. The heat-up indicator
alternates.
This function is not available for some
oven functions.
6.11 Residual heat
When you turn off the oven, the display
shows the residual heat. You can use the
heat to keep the food warm.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock func‐
tion
Application
Minute
Minder
To set a countdown
(max. 2 h 30 min).
This function has no
effect on the operation
of the oven.
Use to turn on the
function. Press or
to set the minutes
and
to start.
Duration
To set how long the
oven works (max. 23 h
59 min).
End Time
To set the switch-off
time for a heating
function (max. 23 h 59
min).
If you set the time for a clock function,
the time starts to count down after 5
seconds.
If you use the clock
functions: Duration, End
Time, the oven turns off the
heating elements after 90 %
of the set time. The oven
uses the residual heat to
continue the cooking
process until the time ends
(3 - 20 minutes).
7.2 Setting the clock functions
Before you use the
functions: Duration, End
Time, you must set a heating
function and temperature
first. The oven turns off
automatically.
You can use the functions:
Duration and End Time at
the same time if you want to
automatically turn on and
turn off the oven on a given
time later.
The functions: Duration and
End Time do not work when
you use the core
temperature sensor.
www.electrolux.com20