User manual

CAUTION!
The appliance is hot.
There is a risk of burns.
Be careful when you
empty the water drawer.
When the water drawer is
running out of water, an
acoustic signal sounds and
the water drawer needs to
be refilled to continue the
steam cooking as described
above.
Let the appliance dry fully
with the door open.
To speed up the drying you
can heat up the appliance
with hot air at temperature
150 °C for approximately 15
minutes.
Steam can condensate on the bottom of
the cavity and the visibility inside the
appliance can be limited. If this occurs,
dry the cavity when the appliance is cool.
6.9 Heat-up indicator
When you activate a heating function,
the bar on the display comes on. The bar
shows that the temperature increases.
When temperature is reached the buzzer
sounds 3 times and the bar flashes and
then disappears.
6.10 Fast Heat Up Indicator
This function decreases the heat-up
time.
Do not put food in the oven
when the Fast heat up
function operates.
To activate the function, hold for 3
seconds. The heat-up indicator
alternates.
6.11 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function Application
Minute Minder To set a countdown (max. 2 h 30 min).
This function has no effect on the opera‐
tion of the appliance.
Use to activate the function. Press
or to set the minutes and to start.
Duration To set the length of an operation (max. 23
h 59 min).
End Time To set the switch-off time for a heating
function (max. 23 h 59 min).
If you set the time for a clock function,
the time starts to count down after 5
seconds.
If you use the clock
functions: Duration, End
Time, the appliance
deactivates the heating
elements after 90 % of the
set time. The appliance uses
the residual heat to continue
the cooking process until the
time ends (3 - 20 minutes).
www.electrolux.com20