User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. PRODUCT DESCRIPTION
- 4. CONTROL PANEL
- 5. BEFORE FIRST USE
- 6. DAILY USE
- 7. CLOCK FUNCTIONS
- 8. AUTOMATIC PROGRAMMES
- 9. USING THE ACCESSORIES
- 10. ADDITIONAL FUNCTIONS
- 11. HINTS AND TIPS
- 11.1 Inner side of the door
- 11.2 Advice for special heating functions of the oven
- 11.3 Full Steam
- 11.4 Turbo Grilling and Full Steam in succession
- 11.5 Half Steam + Heat
- 11.6 Quarter Steam + Heat
- 11.7 Steam Regenerating
- 11.8 Baking
- 11.9 Tips on baking
- 11.10 Baking on one level:
- 11.11 Bakes and gratins
- 11.12 Moist Fan Baking
- 11.13 Multilevel Baking
- 11.14 Pizza Setting
- 11.15 Roasting
- 11.16 Roasting tables
- 11.17 Grilling
- 11.18 Frozen Foods
- 11.19 Slow Cooking
- 11.20 Preserving
- 11.21 Drying
- 11.22 Bread Baking
- 11.23 Core temperature sensor table
- 11.24 Information for test institutes
- 12. CARE AND CLEANING
- 12.1 Notes on cleaning
- 12.2 Recommended cleaning products
- 12.3 Removing the shelf supports
- 12.4 Steam Cleaning
- 12.5 Cleaning Reminder
- 12.6 Steam generation system - Descaling
- 12.7 Descaling reminder
- 12.8 Steam generation system - Rinsing
- 12.9 Tank Emptying
- 12.10 Removing and installing the door
- 12.11 Replacing the lamp
- 13. TROUBLESHOOTING
- 14. ENERGY EFFICIENCY
2. Put all the reaction zones of the strip
into the water for approximately 1
second.
Do not put the strip into the running
water!
3. Shake the strip to remove the excess
of the water.
4. After 1 minute check the hardness of
the water according to the table
below.
The colours of the reaction zones
continue to change after 1 minute.
Do not consider this in the
measurement.
5. Set the hardness of the water in the
menu: Basic Settings.
Test strip Hardness of the
water
1
Test strip Hardness of the
water
2
3
4
The black squares in the table
correspond to red squares on the test
strip.
You can change the hardness level of
the water in the menu: Basic Settings /
Water hardness.
6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Navigating the menus
1. Activate the appliance.
2. Press or to select the menu
option.
3. Press to move to the submenu or
accept the setting.
At each point you can go
back to the main menu with
.
6.2 The menus in overview
Main menu
Sym‐
bol
Menu item Application
Heating Functions Contains a list of heating functions.
Recipes Contains a list of automatic programmes.
Favourites Contains a list of favourite cooking pro‐
grammes created by the user.
Cleaning Contains a list of cleaning programmes.
Basic Settings Used to set the appliance configuration.
Specials Contains a list of additional heating functions.
ENGLISH 11