User manual

7.7 Cancelling the clock
functions
1. Press the again and again until
the necessary function indicator
starts to flash.
2. Press and hold .
The clock function goes out after some
seconds.
8. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
8.1 Using the turnspit
WARNING!
Be careful when you use the
turnspit. The forks and the
spit are sharp. There is a
risk of injury.
WARNING!
Use oven gloves when you
remove the turnspit. The
turnspit and the grill are hot.
There is a risk of burns.
A B
D
C
A. Handle
B. Spit
C. Forks
D. Turnspit frame
1. Put the turnspit handle into the spit.
2. Put the roasting pan on the lowest
shelf position.
3. Put the turnspit frame on the second
shelf position from the bottom.
4. Install the first fork on the spit, then
put the meat on the turnspit and
install the second fork.
5. Use the screws to tighten the forks.
6. Put the tip of the spit into the turnspit
hole. Refer to "Product description".
7. Put the front part of the spit on the
turnspit frame.
8. Remove the turnspit handle.
9. Turn the knob for the oven functions
to the turnspit position. The turnspit
rotates.
10. Set the necessary temperature.
Refer to the cooking tables.
8.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
ENGLISH 11