user manual Fridge-Freezer ENZ34700X
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.
electrolux 3 • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock. cause it to explode, resulting in damage to the appliance. • Ice lollies can cause frost burns if consumed straight from the appliance. Warning! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel.
electrolux Service • Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person. • This product must be serviced by an authorized Service Centre, and only genuine spare parts must be used. either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish.
electrolux 5 1. Press the Mode button until the corresponding icon appears. The fridge or freezer Off indicator flashes. The fridge or freezer temperature indicator shows dashes. 2. Press the OK button to confirm. 3. The fridge or freezer Off indicator is shown. Switching on the fridge or freezer To switch on the fridge or freezer: 1. Press the fridge or freezer temperature regulator. Or: 1. Press the Mode button until the corresponding icon appears. The fridge or freezer Off indicator flashes. 2.
electrolux The Shopping function shuts off automatically after approximately 6 hours. To switch off the function before its automatic end: 1. Press the Mode button until the Shopping indicator flashes. 2. Press the OK button to confirm. 3. The Shopping indicator goes off. Important! The function switches off by selecting a different fridge set temperature. To switch on the function: 1. Press the Mode button until the corresponding icon appears The Quick Chill indicator flashes.
electrolux 7 First use Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brandnew product, then dry thoroughly. Important! Do not use detergents or abrasive powders, as these will damage the finish. Check that the drain hose at the rear of the cabinet discharges into the drip tray.
electrolux protrude until load limit stated on the side of the middle section Important! In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer that the value shown in the technical characteristics chart under "rising time", the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooling).
electrolux 9 • Aluminium foil Regulation of air humidity The two drawers are fitted with adjustable air slots. The opening of the air slots can be adjusted with sliders, to regulate the humidity inside the drawers. • With the air slots open, the stronger air circulation results in a lower air moisture in the drawer. • A closed air slots keeps the natural air moisture for longer.
electrolux Helpful hints and tips Hints for energy saving • Do not open the door frequently or leave it open longer than absolutely necessary. • If the ambient temperature is high and the Temperature Regulator is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice on the evaporator. If this happens, set the Temperature Regulator toward warmer settings to allow automatic defrosting and so a saving in electricity consumption.
electrolux 11 Important! Do not place food against or close to the temperature sensor. This can result in too cold temperatures. • If you want to check the temperature of food stored in the refrigerator, place a glass of water centrally in the cabinet, and put a proper thermometer with an accuracy of +/– 1 °C into it. After 6 hours the temperature can be monitored. The measuring shall be performed under steady-stated conditions (without changing the load).
electrolux • regularly check the door seals and wipe clean to ensure they are clean and free from debris. • rinse and dry thoroughly. Important! Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odour. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush or a vacuum cleaner.
electrolux 13 Periods of non-operation When the appliance is not in use for long periods, take the following precautions: 1. disconnect the appliance from electricity supply 2. remove all food 3. clean the appliance and all accessories 4. leave the door/doors open to prevent unpleasant smells. Important! If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.
electrolux Problem Possible cause Solution The door gasket is deformed or dirty. Refer to "Closing the door". The temperature in the appliance is too cold. The Temperature regulator may be set incorrectly. Set a warmer temperature. Refer to "Hints for temperature inside the fridge. The temperature in the appliance is too warm. The Temperature regulator may be set incorrectly. Set a colder temperature. The door is not closed correctly. Refer to "Closing the door".
electrolux 15 2. If necessary, adjust the door. Refer to "Installation". 3. If necessary, replace the defective door gaskets. Contact the Service Center. Technical data Dimension Height 2000 mm Width 595 mm Depth 623 mm Rising Time 11 h The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label.
electrolux The manufacturer declines all responsibility if the above safety precautions are not observed. This appliance complies with the E.E.C. Directives. Removing the transport support Your appliance is equipped with transport support to secure the door during transportation. To remove them do these steps: 1. Open the door. 2. Remove the transport support from the door sides. 3. Remove the transport support from the lower hinge (some models).
electrolux 17 1. Open the air lever flap. 4. Close the air lever flap. Important! The filter should be handled carefully so fragments do not loosen from the surface. Make sure that the air lever flap is closed to obtain proper function. Door reversibility The door reversibility is not possible. 2. Take the filter out of the plastic bag. 3. Insert the filter in the slot found in the back of the air lever flap.
electrolux
electrolux 19
www.electrolux.
