Technical data

Technical Manual EMP 8x0.00/04/13 v5 wh Münzprüfer Dietmar Trenner GmbH, Germany
Version 1.51
Page 8/42 subject to technical modification EMP8x0.00/04/13 v5
1.2.2 Technical Overview of the EMP 8x0.0000 v5, 8x0.04 v5 and 8x0.13 v5
coin acceptance 32 coin channels, 16 master and 16 slave channels
coin blocking Complete blocking via the machine controller. In addition, any
individual coin, or group of coins can also be blocked through DIP
switches. The 16 switches can be freely assigned to each of the 32
coin channels. Each channel can be assigned two switches.
output signals Six open collector output lines are available. Each output line can be
freely assigned to any of the 16 master coin channels through
programming.
coin output lines 1 to 4: 50 volts / 100 mA
coin output lines 5 to 6: 45 volts / 500 mA
output pulse length 1ms to 65 seconds, programmable
coin return The coin selector gives an active LOW signal on the coin reject line
when the coin return button is pressed.
supply voltage 8 V to 18 volts DC
supply current 60 mA maximum at standby, during coin acceptance briefly 350 mA.
The standby current is 5 µA for battery operation.
temperature range +10°C to +70 °C
humidity classification according to DIN 40040: F
max. coin sizes diameter: 31.5 mm
thickness: 3.2 mm
dimensions (without front plate)
height: 104 mm
width: 53 mm
depth: 93,5 mm
Options
/A power supply connections are reversed, 7 coin output lines, no coin
reject signal
/B battery operation (standard)
/C battery operation with inductive sensor
/E extended temperature and humidity range
–20°C to +70°C, humidity classification E/D:
/F large coin funnel
/I inventory impulse
/L lead detection
/N coin output signals inverted
/O individual coin blocking via parallel lines
/P no coin reject signal
/R additional light barrier to observe coin return path
/S preceding coin output signal
/T teach mode (2 coin channels activated)
/X control for external sorting flaps
/Z additional external strimming detection