Technical data

wh Münzprüfer Dietmar Trenner GmbH, Germany Technical Manual EMP 8x0.00/04/13 v5
Version 1.51
EMP8x0.00/04/13 v5 subject to technical modification page 5/42
1 Introduction
1.1 The EMP 8x0.00 v5, 8x0.04 v5 and 8x0.13 v5 series
The electronic coin selectors EMP 8x0.00 v5, EMP 8x0.04 v5 and EMP 8x0.13 v5
are available in the following versions:
with front plate:
Standard front plate (F 800) EMP 800.xx v5
Mini front plate (F 810) EMP 890.xx v5
Stainless steel front plate (F 801) EMP 850.xx v5
for chassis / channel mounting:
reject down and to the front EMP 820.xx v5
reject down and to the rear EMP 830.xx v5
reject laterally EMP 840.xx v5
full access opening, reject to the front EMP 860.xx v5
full access opening, reject to the rear EMP 870.xx v5
full access opening, reject laterally EMP 880.xx v5
EMP 800.xx v5 EMP 890.xx v5
EMP 850.xx v5 EMP 820.xx v5