Technical data

Technical Manual EMP 8x0.00/04/13 v5 wh Münzprüfer Dietmar Trenner GmbH, Germany
Version 1.51
Page 20/42 subject to technical modification EMP8x0.00/04/13 v5
Figure 10 Window for “Coin Values”
The individual fields are defined as follows:
• S.Value (Calculated Coin value)
The calculated coin value is stored in the coin selector. This value uses the
machine controller for the determination of credit and the selector for
calculating the number of inventory pulses.
• Value (Actual coin value)
This “value” is not stored in the coin selector. In certain situations it may be
necessary to give a coin an S.value other than its face value. For example,
a rebate value may be assigned to a particularly valuable coin. In this
case, the “value” is displayed for clarity when working with wheasy 3.
• Currency
The currency description is not stored in the coin selector. However, it is
still important to have this description when working with wheasy 3
because a coin selector may be programmed to accept multiple
currencies.
• Tolerance
The tolerances are stored in the coin selector. They serve to provide a
better overview when working with wheasy 3. The desired tolerances
“broad”, “narrow”, “or very narrow “ or “no indication” may be entered here.
• TM (Teach mode)
This choice enables the coin selector mounted DIP switch teach mode
function for a channel. This mode is activated when the appropriate box
shows a “√ “.
A star (*) may be shown to the left of the “TM” checkbox. The star indicates that
this master channel also has a slave channel associated with it (See section 2.6
slave channels).