Gas and Mixed Fuel Cookers - Fogões a Gás e Mistos INSTRUCTION BOOKLET MANUAL DE INSTRUÇÕES Model - Modelo EKG 6704 - EKG 6704 X 35691-5711 PT
ENGLISH Important Safety Information You MUST read these warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department. Installation • • • • • • • • • • The work of installation must be carried out by competent and qualified installers according to the regulations in force. Any modifications to the domestic electrical mains which may be necessary for the installation of the appliance should be carried out only by competent personnel.
Contents For the User Important Safety Information 2 For the Installer Dimensions of the appliances 4 Instructions for the Installer 21 The Gas Burner Controls 5 Technical data 21 Using the Hob 6 Gas connection 22 Gas Oven 7 Adaptation to different kinds of gas 24 Before the First Use of the appliance 8 Electrical connection 26 Using the Gas Oven 9 Using the Fan Gas Oven 11 Grilling 12 Hints and Tips for using the Gas burners 13 Hints and Tips for using the Oven 13 Maintenan
Dimensions of the appliances H D W Height (H) Width (W) Depth (D) 850 600 600 Storage Drawer The storage drawer is located underneath the oven cavity. During cooking the storage drawer may become hot if the oven is on high for a long period of time, therefore flammable materials such as oven gloves, tea towels, plastic aprons etc. should not be stored in the drawer.
The Gas Burner Controls Control knobs on the front panel The knobs for using the gas hob of the cooker are found on the control panel. The regulation knobs could be turned in anti-clockwise direction until the small flame symbol, and vice-versa for the larger symbol. No gas supply Maximum gas supply Minimum gas supply ! To light a burner: 1. push the relevant control knob in completely and turn it anticlockwise to the maximum position ( ). 2. then, check the flame is regular and adjust it as required.
Using the Hob Pottery Remember that a wide-bottomed pan allows a faster cooking than a narrow one. Always use pots which properly fit what you have to cook. Particularly make sure that the pans are not too small for liquids, since these could easily overflow. Moreover, the pans should not be too large for a faster cooking. In fact, grease and juices may spread on the bottom and burn easily. It is better to use non-openable moulds for baking cakes.
Gas Oven Control Knob for the Oven Light, the Electric Grill and the Oven Fan (Fig. 4) Oven Light - The oven light will be on without any cooking function. Grill Function - The heat comes from the electric grill element only. Oven Fan - It can be used in combination with the gas oven burner (“Fan cooking” function). Grill Control Light Fig. 4 The Grill control light will come on when the “Light-Grill & Fan” control knob is turned. The light will remain on until the correct temperature is reached.
Before the First Use of the appliance Before using the appliance, remove all packaging, both inside and outside the appliance, including the advertising labels and any protective film. Before cooking for the first time, carefully wash the oven accessories. Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal. 1. Ignite the gas oven burner and set the gas oven control knob to "240". 2.
Using the Gas Oven Always cook with the oven door closed. Cooking Chart Cooking times do not include pre-heating time. A short oven pre-heating (about 10 minutes) is necessary before any cooking. During cooking, the door should be opened as little as possible to avoid heat loss, and excessive fuel consumption. the oven gas burner: ! To1. ignite Press the gas oven control knob, turn it to 240 and wait for the flame to come on. This may take 10-15 seconds. Do not release the knob until the burner ignites.
! Manual ignition (in case of lack of electrical supply) 1. Open the oven door. 2. Hold a flame near the hole in the bottom of the oven cavity as shown in Fig. 8. 3. At the same time press the gas oven control knob and turn it anti-clockwise until the maximum temperature ("240") is reached. The oven burner will automatically ignite. It is possible to check the flame through the holes in the bottom of the oven. 4. When the oven burner is lit, keep the gas oven control knob for approximately 10-15 seconds.
Using the Fan Gas Oven Always cook with the oven door closed. Cooking Chart Cooking times do not include pre-heating time. A short oven pre-heating (about 10 minutes) is necessary before any cooking. The air inside the oven is heated by the gas burner and the fan circulates hot air to maintain an even temperature inside the oven.
Grilling Grilling must be carried out with the oven door closed. ! How to Use the Grill 1. Turn the “Light-Grill & Fan” clockwise control knob to . position 2. Adjust the grid and grill pan runner position to allow for different thicknesses of food. Position the food close to the top element for faster cooking and further away for more gentle cooking. Preheat the grill on a full setting for a few minutes before sealing steaks or toasting.
Hints and Tips for using the Gas burners Start your cooking with a big flame by turning the knob to the symbol . Then adjust the flame as necessary. The outside of the flame is much hotter than its inside (nucleus). Accordingly , the top of the flame should lick the bottom of the pan. Excessive flames mean a waste of gas. In contrast with electric grids, gas burners do not require flat-bottomed pans: the flames lick the bottom and spread the heat all over the surface.
Condensation and Steam The oven is supplied with an exclusive system which produces a natural circulation of air and the constant recycling of steam. This system makes it possible to cook in a steamy environment and keep the dishes soft inside and crusty outside. Moreover, the cooking time and energy consumption are reduced to a minimum. During cooking steam may be produced which can be released when opening the oven door. This is absolutely normal.
Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the appliance from the electricity supply. This appliance cannot be cleaned with steam or with a steam cleaning machine. The Hob Top The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little wasing up liquid has been added.
Cleaning the Oven Before any maintenance or cleaning can be carried out, you must DISCONNECT the appliance from the electricity supply. The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan. Cleaning materials Before using any cleaning materials on your oven, check that they are suitable and that their use is recommended by the manufacturer. Cleaners that contain bleach should NOT be used as they may dull the surface finishes.
The Oven Door and its gasket Before cleaning the oven door, we recommend you to remove it from the oven. Proceed as follows: 1. open the oven door completely; 2. find the hinges linking the door to the oven (see figure 11); 3. unlock and turn the small levers located on the two hinges (see figure 12); 4. handle the door by its left- and right-hand sides, then slowly turn it towards the oven until it is halfclosed (see figure 13); 5. gently pull the oven door off its site (see figure 13); 6.
Lid cleaning The crystal lid can be dissasembled to allow a better cleaning ( see Fig. 15). Clean the crystal lid only with warm water and avoid the use of rough cloths or abrasive substances. After a proper cleaning, carefully reposition the lid into its hinges. Balancing the lid Appliances provided with crystal lids are equipped with specially balanced springs, inserted in the hinges at the back of the appliance, to allow the lid to be closed smoothly and easily.
Something not Working If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Centre. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. " The flow of gas seems abnormal Make sure that: — the flame speader holes are not obstructed; — the pressure regulator is working; — the bottle valve is completely open.
European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed below for the period specified in the appliance guarantee or otherwise by law.
Instructions for the Installer Technical Data Hob Appliance Class 2 sub class 1 and Class 1 Front left burner (rapid) Rear left burner (semi-rapid) Rear right burner (semi-rapid) Front right burner (auxiliary) Category: II2H3+ Appliance set for use with gas type: LPG 28-30/37 mbar Gas oven burner 2700 W Electric grill 1650 W Supply voltage (50 Hz) 230 V 3,2 2,0 2,0 1,0 kW kW kW kW Dimensions Height 850 mm Depth 600 mm Width 600 mm Burner characteristics Gas LPG Natural Gas Injector 1/100 mm
Instructions for the Installer Installation This appliance cannot be positioned on a base. The following instructions are meant for a qualified installer, in order that the operations of installation, regulation, and service are executed according to the existing regulations. Whenever changes are mode involving the disconnection of the appliance it is necessary to proceed with maximum caution.
Gas connection Gas connection must be carried out according to the rules in force. The manufacturing company release the unit, once tested, adjusted for the kind of gas stated on the rating plate located on the back of the range, next to connection pipe. Be sure that you are going to connect the unit to the same kind of gas written on the plate. Gas connection (Fig. 19) LPG : use the pipe holder «A». Natural gas : use the pipe holder «B». Always insert the gasket «C».
Adaptation to different kinds of gas To adapt the appliance to a different kind of gas from the one the appliance has been set for, follow the instructions below in their order. Hob burners nozzles 1. Nozzles replacement 1. 2. 3. Remove the pan supports. Extract the caps and the wall baffles of the burners. Using a socket spanner 7 unscrew and remove (Fig. 21) the nozzles replacing them with the ones required for the kind of gas in use (see table “Burner characteristics”). 4.
Replacement of gas oven burner nozzle To replace the gas oven nozzle, follow this procedure: 1. remove the bottom plate of the oven cavity (“A”). 2. Undo the two fixing screws (“C”) which keep the oven gas burner in place. 3. Gently slide the oven gas burner off the injector support (“D”) and slowly move it to the left hand side, taking care not to cause stress to the spark plug connection wire (“E”) and the thermocouple (“F”) conductor. 4.
Electrical connection The unit is preset to work with a voltage of single phase 230 V. Before making the connection make sure that: — the energy power available in the user's house is sufficient for the normal supply of this appliance (see rating plate). — the unit is correctly connected to earth through a suitable plug and according to the installation country Laws. — the socket or the omnipolar switch used for the connection must be easilv reached with the installed appliance.
