EKE66409X OPERATING AND INSTALLATION INSTRUCTIONS OF INDUCTION FREESTANDING OVEN
Dear Customer, We take pride in offering quality products to our customers. These products are produced in modern facilities and carefully inspected and checked to give you the highest quality. This manual is prepared in order to help you to use your appliance that is manufactured by the most recent technology, with confidence and maximum efficiency.
CONTENTS : 1. 2. 3. 4. 5. 6.
PART 1 : PRESENTATION AND SIZES OF PRODUCT 1 11 2 7 6 3 9 5 8 4 10 Part of List: 1-Cooktop 2-Control panel 3-Oven Door Handle 4-Drawer cover 5-Oven Door 6-Oven Tray 7-Wire Grid 8-Front Resistance 9-Fan Store 10-Oven Lamp 11-Induction zone MODEL EKE66409X SIZE(cm) 60 x 60 x 85
PART 2 : SAFETY WARNINGS READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE USING YOUR APPLIANCE, AND KEEP IT IN A CONVENIENT PLACE FOR REFERENCE WHEN NECESSARY. THIS MANUAL IS PREPARED FOR MORE THAN ONE MODEL IN COMMON. YOUR APPLIANCE MAY NOT HAVE SOME OF THE FEATURES THAT ARE EXPLAINED IN THIS MANUAL. PAY ATTENTION TO THE EXPRESSIONS THAT HAVE FIGURES, WHILE YOU ARE READING THE OPERATING MANUAL.
- WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock. - For induction hobs, metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. - For induction hobs, after use, switch off the hob element by its control and do not rely on the pan detector. - For hobs incorporating a lid, any spillage should be removed from the lid before opening.
- Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass and other surface since they can scratch the surface, which may result in shattering of the glass or damage to the surface. - Do not use steam cleaners for cleaning the appliance. - WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. - CAUTION: Accessible parts may be hot when the cooking or grilling is in use. Young children should be kept away.
Installation Warnings • Do not operate the appliance before it is fully installed. • The appliance must be installed by an authorized technician and put into use. The producer is not responsible for any damage that might be caused by defective placement and installation by unauthorized people. • When you unpack the appliance, make sure that it is not damaged during transportation. In case of any defect; do not use the appliance and contact a qualified service agent immediately.
PART 3. INSTALLATION AND PREPARATIONS FOR USE 3.1 INSTALLATION OF OVEN There are some factors that must be paid attention to while installing your oven. Surely pay attention to our below suggestions in order to be able to prevent any problems and/or dangerous situations that may occur later. It can be placed close to other furniture on condition that in the area where the oven is set up, the furniture’s height must not exceed the height of the cooker panel.
3.2 ELECTRIC CONNECTION AND SECURITY During the electric connection, surely follow the instructions below. The earthing cable must be connected to the terminal. You have to ensure the cable with insulation to be connected to the power source during the connection of cable. If there is not any appropriate earthed electric outlet in accordance with regulations in the place where the appliance will be installed, immediately contact to our authorized service.
3.3 GENERAL WARNINGS AND MEASURES Your appliance is produced in accordance with the related security instructions connected with electrical appliance. The maintenance and repair works must be made just by the authorized service technician who is trained by the producer firm. The installation and repair works whitout following rules may endanger you. Its outside surfaces heat while your appliance operates. The interior surfaces of oven, components that ensures the heat and steam that goes out are quite hot.
PART 4 . USE OF YOUR OVEN 4.1 GENERAL APPEARENCE AND TECHNICAL FEATURES OF YOUR OVEN LOWER HEATER UPPER HEATER GRILL TURBO HEATER 1100 WATT 1200 WATT 1400 WATT 2000 WATT 4.
Operation of the appliance Use the induction cooking zones with suitable cookware. After mains voltage is applied, all displays are come on for a moment. When this time is over, the hob is in the stand-by mode and it is ready for operation. The hob is controlled with electronic sensors which are operated by touching the related sensors. Each sensor activation is followed by a sound signal (buzzer). Switching the appliance on: Switch the hob on by touching ON/OFF key .
Pot Detection If cookware is detected, the “suspended pot” is shown on the cooking element display like below . The cooking zone is switched off automativally after 10 minutes without recognizing of any cookware. It would be better to put the pot on the hob before they apply power to the induction element. Switching all cooking-zones off: To turn all the cooking zones off at once, touch the key. In the stand-by mode, an "H" appears on all cooking zones which are hot.
Safety switch off function: Every cooking zone will be switched off after a defined maximum operation time if the heat setting is not modified. Every change in the cooking zone puts back the maximum operation time to the initial value of the operating time limitation. The maximum operation time depends on the selected temperature level. Heat setting 1-2 3-4 5 6-9 Safety switch off after 6 Hours 5 Hours 4 Hours 1,5 Hours Child Lock: After switching on the control, the child lock function can be activated.
Key Lock Key lock functionality is for blocking and set the appliance into a save modus during operation. Touch modifications as for example rise heat settings and others should not be possible. It is only possible to switch the appliance off. The lock function is active, if the Key Lock button is pressed at least 2 sec. This operation is acknowledged by a buzzer. After successful operation of more than 2 sec, the Key Lock Indicator flashes and the heater is locked.
Hints And Tips Cookware · Use thick, flat, smooth bottomed cookwares that are the same diameter as the element. This will help reduce cooking times. · Cookware made of steel, enamelled steel, cast iron and stainless steel (if appropriately abelled by the manufacturer) will give you the best results. · Cookware made of enamelled steel or aluminium or copper bottoms can cause a metallic residue to remain on the hob. If left, this becomes difficult to remove. Clean the hob after every use.
Examples of cooking applications The information given in the following table is for guidance only. Settings 0 1-3 4-5 6 -7 8 9 P Use for Element off Delicate warming Gentle simmering, slow warming Reheating and rapid simmering Boiling, saute and searing Maximum heat Boost function Cleaning tips · Do not use abrasive pads, corrosive cleaners, aerosol cleaners or sharp objects to clean the surfaces of the hob. · To remove burnt food, soak it off with a damp cloth and washing-up liquid.
4.3 USE OF DIGITAL MINUTE MINDER Simultaneously press (+) and (-) buttons of digital minute minder. The display will start flashing, and then you can set the time setting by using (+) and (-) buttons. When you press (+) or (-) buttons after setting the time ( ) symbol is displayed, and the desiring timer set. At the end of this time period, it will make a beep sound but the oven continues working. In order to turn the oven off, you must take the switch and thermostat of the oven to closed position.
4.4 OVEN FUNCTIONS Oven Lamp Only the oven light will be turned on and it remains on in all the cooking functions. Defrost Function The oven's warning lights will be turned on, the fan starts operating. To use the defrost function, take your frozen food and place it in the oven on a shelf placed in the third slot from the bottom. It is recommended that you can place an oven tray under the defrosting food, to catch the water accumulated due to melting ice.
Grilling and Roasting Chicken Function The oven's thermostat and warning lights will be turned on, the grill heating element and turnspit will start operating. The function is used for grilling and toasting foods and roasting chicken with the roasting skewer. For grilling; use the upper shelves of oven. Lightly brush the wire grid with oil to stop foods sticking and place foods in the center of the grid. Always place a tray beneath to catch any drips of oil or fat.
Energy Saving - During use of electrical cookers , it is required to use saucepans having flat bases. - Choose a cookware of proper size . - Using a lid will reduce cooking times. - Minimise the amount of liquid or fat to reduce cooking times. - When liquid starts boling ,reduce the temperature setting. - Oven door should not be opened often during cooking period. - Induction cooking zones adapt automatically to the size of the cookware bottom up to a certain limit.
Pan anti-tilting wire 5. Rack 4. Rack 3. Rack 2. Rack 1. Rack To locate grid correctly in the cavity, put it to any rack and push the grid up to the end. The pan anti-tilting wire must be placed inside of the cavitiy. WARNING- Fit the grid correctly into any correspondingrack in the oven cavity and push it to the end.
PART 5 : CLEANING AND MAINTENANCE 5. 1 CLEANING Be sure that all control switches are off and your appliance cooled before cleaning your oven. Plug off the appliance. Control whether they are appropriate and recommended by the manufacturer before using the cleaning materials on your oven. As they may damage the surfaces, do not use caustic creams, abrasive cleaning powders, thick wire wool or hard tools. In case the liquids that overflows around your oven burn, the enameled place may be damaged.
PART 6 : SERVICE AND TRANSPORT 6.1 Requirements Before Contacting to Service If the oven does not operate; The oven may be plugged off, there has been a blow-out. On models fitted with a timer, time may not be regulated. If the oven does not heat; The heat may be not adjusted with oven’s heater control switch. If the interior lighting lamp does not light; The electricity must be controlled. It must be controlled whether the lamps are defective.
ERROR CODES If there is an error, error code will be showed at heater displays. E1 : Cooling Fan is disabled, call authorized service agents. E3 : Supply coltage is over than rated values, turn the hob off by touching ,wait until “H” disappears for all zones, turn the hob on by touching and continue to use. If same error is seems again, call authorized service agents.
SPECIFICATION TABLE EKE66409X Rated Voltage : 220-240V Rated Freauency : 60 Hz Rated Power : 9800-10200 W Front Right Induction Hob Diameter : 200 mm Nominal Power : 2100 W Boost Power : 2500 W Rear Right Induction Hob Diameter : 160 mm Nominal Power : 1400 W Boost Power : 1800 W Front Left Induction Hob Diameter : 160 mm Nominal Power : 1400 W Boost Power : 1800 W Rear Left Induction Hob Diameter : 200 mm Nominal Power : 2100 W Boost Power : 2500 W
ANTI-TILTING KIT 1 2 3 Screw (x1) 4 Anti-Tilting Bracket (x1) (Will be installed to the wall) Adaptor (x1) (Installed on the product) Dowel (x1) Document bag contains an anti-tilting kit.Anti-tilting bracket (1) should be removed from the kit and installed onto the wall with the following measures as shown in the figure. Height can be adjusted by loosing the screw of the bracket.
GUARANTEE AND SERVICE We, Electrolux, undertake that if within 12 months of the date of the purchase this Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
