EIV85443 EN Hob User Manual
www.electrolux.com CONTENTS 1. SAFETY INFORMATION....................................................................................2 2. SAFETY INSTRUCTIONS..................................................................................4 3. INSTALLATION.................................................................................................. 7 4. PRODUCT DESCRIPTION................................................................................ 9 5. DAILY USE..................................
ENGLISH 3 result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • • • • • • • • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
www.electrolux.com • • • • • • • • • • NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
ENGLISH • • • • • • • • • • Do not install or use a damaged appliance. Follow the installation instructions supplied with the appliance. Keep the minimum distance from other appliances and units. Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. Seal the cut surfaces with a sealant to prevent moisture to cause swelling. Protect the bottom of the appliance from steam and moisture. Do not install the appliance adjacent to a door or under a window.
www.electrolux.com • • • • • • • • • • • Do not change the specification of this appliance. Make sure that the ventilation openings are not blocked. Do not let the appliance stay unattended during operation. Set the cooking zone to “off” after each use. Do not rely on the pan detector. Do not put cutlery or saucepan lids on the cooking zones. They can become hot. Do not operate the appliance with wet hands or when it has contact with water.
ENGLISH 7 3. INSTALLATION WARNING! Refer to Safety chapters. WARNING! All electrical connections must be made by a qualified electrician. 3.1 Before the installation Before you install the hob, write down the information bellow from the rating plate. The rating plate is on the bottom of the hob. CAUTION! Do not drill or solder the wire ends. This is strictly forbidden! Serial number ........................... CAUTION! Do not connect the cable without cable end sleeve. 3.
www.electrolux.com 3.4 Assembly If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process. min. 500mm min.
ENGLISH 9 4. PRODUCT DESCRIPTION 4.1 Cooking surface layout 3 1 Induction cooking zone 2 Control panel 3 Flexible induction cooking area consisting of four sections 1 1 2 4.2 Control panel layout 1 2 3 4 5 6 13 7 12 8 11 10 9 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sen‐ sor field Function Comment 1 ON / OFF To activate and deactivate the hob. 2 Lock / Child Safety De‐ vice To lock / unlock the control panel.
www.electrolux.com Sen‐ sor field 9 - 10 11 / 12 - 13 Function Comment PowerBoost To activate and deactivate the function. Control bar To set a heat setting. - To select the cooking zone. - To increase or decrease the time. Control bar To set the heat setting for flexible induc‐ tion cooking area. 4.3 Heat setting displays Display Description The cooking zone is deactivated. The cooking zone operates. - Automatic Heat Up operates. PowerBoost operates.
ENGLISH 4.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicators show the level of the residual heat for the cooking zones you are currently using. The indicators may also come on for the neighbouring cooking zones even if you are not using them. 11 The induction cooking zones produce the heat necessary for the cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware. 5.
www.electrolux.com setting in the beginning and then continues to cook at the desired heating setting. To activate the function the cooking zone must be cold. To activate the function for a cooking ( comes on). zone: touch Immediately touch a desired heat setting. After 3 seconds comes on. To deactivate the function: change the heat setting. 5.6 PowerBoost This function makes more power available to the induction cooking zones.
ENGLISH comes on. Touch of the timer to choose one of the following: The function has no effect on the operation of the cooking zones. • - the sounds are off • - the sounds are on To confirm your selection wait until the hob deactivates automatically. 5.8 Lock You can lock the control panel while cooking zones operate. It prevents an accidental change of the heat setting. When the function is set to hear the sounds only when: Set the heat setting first. To activate the function: touch .
www.electrolux.com 5.12 Power management function • Cooking zones are grouped according to the location and number of the phases in the hob. See the illustration. • Each phase has a maximum electricity loading of 3600 W. • The function divides the power between cooking zones connected to the same phase. • The function activates when the total electricity loading of the cooking zones connected to a single phase exceeds 3600 W.
ENGLISH Mode H6 Auto‐ matic light Boil‐ ing1) Frying2) On Fan speed 2 Fan speed 3 1) The hob detects the boiling process and activates fan speed in accordance with au‐ tomatic mode. 2) The hob detects the frying process and activates fan speed in accordance with au‐ tomatic mode. 3) This mode activates the fan and the light and does not rely on the temperature. Changing the automatic mode 1. Deactivate the appliance. 2. Touch for 3 seconds. The display comes on and goes off. 3.
www.electrolux.com To set the heat setting use two left side control bars. Switching between the modes To switch between the modes use sensor field: . > 160 mm 6.2 FlexiBridge Standard mode When you switch between the modes the heat setting is set back to 0. Diameter and position of the cookware This mode is active when you activate the hob. It connects the sections into two separate cooking zones. You can set the heat setting for each zone separately. Use two left side control bars.
ENGLISH 17 Incorrect cookware position: 6.4 FlexiBridge Max Bridge mode 6.3 FlexiBridge Big Bridge mode To activate the mode touch until you see the correct mode indicator . This mode connects three rear sections into one cooking zone. The front section is not connected and operates as a separate cooking zone. You can set the heat setting for each zone separately. Use two left side control bars. To activate the mode touch until you see the correct mode indicator .
www.electrolux.com . • 6.5 PowerSlide function This function allows you to adjust the temperature by moving the cookware to a different position on the induction cooking area. • first time you will get heat setting for the front position, position and The function divides the induction cooking area into three areas with different heat settings. The hob detects the position of the cookware and adjust the heat setting corresponding with the position.
ENGLISH 19 7. HINTS AND TIPS WARNING! Refer to Safety chapters. 7.1 Cookware For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly. Use the induction cooking zones with suitable cookware. Cookware material • correct: cast iron, steel, enamelled steel, stainless steel, multi-layer bottom (with a correct marking from a manufacturer). • not correct: aluminium, copper, brass, glass, ceramic, porcelain.
www.electrolux.com Heat setting -1 Use to: Time (min) Hints Keep cooked food warm. as nec‐ Put a lid on the cookware. essary 1-3 Hollandaise sauce, melt: but‐ 5 - 25 ter, chocolate, gelatine. Mix from time to time. 1-3 Solidify: fluffy omelettes, baked eggs. 10 - 40 Cook with a lid on. 3-5 Simmer rice and milkbased dishes, heat up readycooked meals. 25 - 50 Add at least twice as much liquid as rice, mix milk dishes halfway through the procedure. 5-7 Steam vegetables, fish, meat.
ENGLISH Other remotely controlled appliances may block the signal. Do not use any such appliances near to the hob while Hob²Hood is on. 21 To find the full range of cooker hoods which work with this function refer to our consumer website. The Electrolux cooker hoods that work with this function must have the symbol . Cooker hoods with the Hob²Hood function 8. CARE AND CLEANING WARNING! Refer to Safety chapters. 8.2 Cleaning the hob • 8.1 General information • • • • • Clean the hob after each use.
www.electrolux.com Problem Possible cause Remedy You do not set the heat setting for 10 seconds. Activate the hob again and set the heat setting in less than 10 seconds. You touched 2 or more sensor fields at the same time. Touch only one sensor field. There is water or fat stains on the control panel. Clean the control panel. An acoustic signal sounds and the hob deactivates. An acoustic signal sounds when the hob is deactiva‐ ted. You put something on one or more sensor fields.
ENGLISH Problem Possible cause 23 Remedy The flexible induction The cookware is in a Place the cookware in the cooking area does not heat wrong position on the flexi‐ correct position on the flex‐ up the cookware. ble induction cooking area. ible induction cooking area. The position of the cookware depends on the activated function or func‐ tion mode. Refer to "Flexi‐ ble induction cooking area". The diameter of the bottom of the cookware is incor‐ rect for the activated func‐ tion or function mode.
www.electrolux.com Problem Possible cause Remedy and a number come on. There is an error in the hob. Deactivate the hob and ac‐ tivate it again after 30 sec‐ onds. If comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the prob‐ lem continues, speak to an Authorised Service Centre. You can hear a constant beep noise. The electrical connection is Disconnect the hob from incorrect. the electrical supply.
ENGLISH The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware. 25 For optimal cooking results use cookware no larger than the diameter in the table. 11. ENERGY EFFICIENCY 11.
www.electrolux.
ENGLISH 27
867350547-A-502018 www.electrolux.
