Specification

High standards of quality at Electrolux Home Products, Inc.
mean we are constantly working to improve our products.
We reserve the right to change specifications or
discontinue models without notice.
Electrolux Major Appliances, N.A.
USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-877-4electrolux (1-877-435-3287) • electroluxappliances.com
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxappliances.ca
EI30EF45Q 10/15 © 2015 Electrolux Home Products, Inc.
•
Allow 30" minimum clearance between top of cooking surface and bottom
of unprotected wood or metal overhead cabinet; or 24" minimum clearance
when bottom of wood or metal overhead cabinet is protected by not less
than 1/4" flame retardant millboard covered with not less than No. 28 MSG
sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.
•
To reduce risk of fire when using overhead cabinetry, install range hood
that projects horizontally a recommended minimum of 5" beyond bottom of
cabinets.
•
Follow all dimension requirements provided to prevent property damage,
potential fire hazard, and incorrect countertop and cabinet cuts.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.com for detailed instructions.
Optional Accessories
•
Stainless Steel Backguard – (PN # A02535501).
30" Electric Freestanding Range Specifications
•
Product Weight – 240 Lbs.
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz,
fused on both sides of line with ground.
•
Connected Load (kW Rating) @ 240 / 208 Volts = 13.8 / 10.4 kW
•
Amps @ 240 / 208 Volts = 57.5 / 50 Amps
•
Recommended Circuit Breaker – 40 Amps
•
Always consult local and national electric codes.
•
Make sure wall coverings around range can withstand heat generated
by range.
•
Floor beneath range MUST be solid and level.
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than maximum
width of appliance.
•
Range can be installed flush to wall with 0" minimum rear clearance.
•
Minimum 1" clearance required from edge of rangetop to nearest
combustible wall on either side of range above 36" height.
30" Electric Freestanding Range with Front Controls
EI30EF45Q
25"
max.
30" min.
13"
max.
24"
Minimum
1"clearance
required
to nearest
combustible
wall on
either side
of range
above 36"
height
6"
2
1
/2"
Shaded areas allow for flush-to-wall installation
of rear wall electrical outlet. (All dimensions
for outlet location are maximum.)
C
L
9"
36"
stand.
30"
min.*
Wall
18"
min.
18"
min.
9"
3"
3"
30
1
/8"
*Note: 30" minimum clearance between top of cooking
surface and bottom of unprotected wood or metal
overhead cabinet; or 24" minimum clearance when
bottom of wood or metal overhead cabinet is protected
by not less than 1/4" flame-retardant millboard covered
with not less than No. 28 MSG sheet steel, 0.015"
stainless steel, 0.024" aluminum or 0.020" copper.
0"
clearance is minimum for rear of range. Follow all
dimension requirements provided above to prevent
property damage, potential fire hazard, and incorrect
countertop and cabinet cuts.
Front
29
7
/8"
Side
26"
28
3
/4"
46 "
Power cord location
(left bottom rear*)
*when viewed from front
36
3
/8"
(Adjustable
to
±
1
/4")
ELECTRIC FREESTANDING RANGE
EI30EF45QS