User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. INSTALLATION
- 4. PRODUCT DESCRIPTION
- 5. DAILY USE
- 5.1 First activation
- 5.2 Activating and deactivating
- 5.3 General information
- 5.4 Menu functions
- 5.5 AUTO OFF
- 5.6 Changing the language
- 5.7 Using the cooking zones
- 5.8 The heat setting
- 5.9 Flexible induction cooking zone
- 5.10 Split function
- 5.11 Automatic Heat Up
- 5.12 Power Boost
- 5.13 Pro Cook function
- 5.14 Timers
- 5.15 PAUSE
- 5.16 Locking the hob
- 5.17 Shortcuts
- 5.18 Display
- 5.19 Sounds
- 5.20 Power management function
- 6. HINTS AND TIPS
- 7. CARE AND CLEANING
- 8. TROUBLESHOOTING
- 9. TECHNICAL DATA
- 10. ENERGY EFFICIENCY
3.3 Connection cable
• The hob is supplied with a connection
cable.
• To replace the damaged mains cable
use the following (or higher) mains
cable type: H05V2V2-F T min 90°C.
Speak to your local Service Centre.
3.4 Attaching the seal
1. Clean the worktop around the cut out
area.
2. Attach the supplied seal stripe to the
lower edge of the hob along the outer
edge of the glass ceramic. Do not
extend it. Make sure that the ends of
the seal stripe are located in the
middle of one side of the hob.
3. Add some mm when you cut the seal
stripe to the length.
4. Push the two ends of seal stripe
together.
3.5 Assembly
min.
50mm
min.
500mm
min.
2mm
min. 2 mm
A
B
A
12 mm
28 mm
38 mm
B
62 mm
46 mm
36 mm
min
30 mm
min. 500 mm
< 20 mm
> 20 mm
min. 2 mm
A
B
A
12 mm
28 mm
38 mm
B
62 mm
46 mm
36 mm
min. 500 mm
ENGLISH 7