EHX8575FHK EN Hob User Manual
www.electrolux.com CONTENTS 1. SAFETY INFORMATION....................................................................................2 2. CONDITIONS OF USE.......................................................................................4 3. SAFETY INSTRUCTIONS..................................................................................4 4. PRODUCT DESCRIPTION................................................................................ 7 5. DAILY USE.........................................
ENGLISH 3 result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • • • • • • • This appliance can be used by children aged 8 years and above and by persons with reduced capabilities provided that they have been given instruction and/or supervision regarding the safe use of the appliance and understand the potential hazards involved. Do not let children play with the appliance.
www.electrolux.com • • • • • • • • CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. After use, switch off the hob element by its control and do not rely on the pan detector.
ENGLISH • • • • • Protect the bottom of the appliance from steam and moisture. Do not install the appliance adjacent to a door or under a window. This prevents hot cookware to fall from the appliance when the door or the window is opened. If the appliance is installed above drawers make sure that the space, between the bottom of the appliance and the upper drawer, is sufficient for air circulation. The bottom of the appliance can get hot.
www.electrolux.com • • • • • • Do not put cutlery or saucepan lids on the cooking zones. They can become hot. Do not operate the appliance with wet hands or when it has contact with water. Do not use the appliance as a work surface or as a storage surface. If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply. This to prevent an electrical shock.
ENGLISH 7 4. PRODUCT DESCRIPTION 4.1 Cooking surface layout 1 Induction cooking zone 2 Control panel 3 Flexible induction cooking area consisting of four sections 1 1 1 3 2 4.2 Control panel layout 1 2 3 4 5 6 7 8 13 12 14 11 10 9 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sen‐ sor field Function Comment 1 ON / OFF To activate and deactivate the hob.
www.electrolux.com Sen‐ sor field Function Comment Hob²Hood To activate and deactivate the manual mode of the function. 9 STOP+GO To activate and deactivate the function. 10 Power function To activate and deactivate the function. Control bar To set a heat setting. - To select the cooking zone. - To increase or decrease the time. Control bar To set the heat setting for flexible induc‐ tion cooking area. 8 - 11 12 / 13 - 14 4.
ENGLISH 4.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicator shows the level of the residual heat. 9 The induction cooking zones make the heat necessary for cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware. 5. DAILY USE WARNING! Refer to Safety chapters. Heat setting The hob deacti‐ vates after 5.
www.electrolux.com 5.5 Automatic Heat Up Activate this function to get a desired heat setting in a shorter time. When it is on, the zone operates on the highest setting in the beginning and then continues to cook at the desired heating setting. To activate the function the cooking zone must be cold. To activate the function for a cooking To see the remaining time: set the cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows the remaining time.
ENGLISH 11 time. When the time comes to an end, the sound operates and 00 flashes. Touch To stop the sound: touch To override the function for only one . The function has no effect on the operation of the cooking zones. Deactivate the hob with comes on. . . cooking time: activate the hob with comes on. Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the hob. When you 5.8 STOP+GO This function sets all cooking zones that operate to the lowest heat setting.
www.electrolux.com • The heat setting display of the reduced zones changes between two levels. 5.13 Hob²Hood It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infra — red signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually. For most of the hoods the remote system is originally deactivated.
ENGLISH Operating the fan speed manually You can also operate the function manually. To do that touch when the hob is active. This deactivates automatic operation of the function and allows you to change the fan speed manually. When you press you raise the fan speed by one. When you reach an intensive level 13 Activating the light You can set the hob to activate the light automatically whenever you activate the hob. To do so set the automatic mode to H1 – H6.
www.electrolux.com > 160 mm 6.2 FlexiBridge Standard mode This mode is active when you activate the hob. It connects the sections into two separate cooking zones. You can set the heat setting for each zone separately. Use two left side control bars. 6.3 FlexiBridge Big Bridge mode To activate the mode press until you see the correct mode indicator. This mode connects three rear sections into one cooking zone. The one front section is not connected and operates as a separate cooking zone.
ENGLISH 15 Incorrect cookware position: 6.4 FlexiBridge Max Bridge mode To activate the mode press until you see the correct mode indicator. This mode connects all sections into one cooking zone. To set the heat setting use one of the left side control bars. Correct cookware position: To use this mode you have to place the cookware on the four connected sections. If you use cookware smaller 6.
www.electrolux.com You can change the heat settings for each position separately. The hob will remember your heat settings next time you activate the function. . Activating the function To activate the function place the cookware in the correct position on the • • Heat setting display for the left front control bar shows the heat setting. To change the heat setting use left front control bar.
ENGLISH Cookware dimensions Induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit. The cooking zone efficiency is related to the diameter of the cookware. The cookware with a smaller diameter than the minimum receives only a part of the power generated by the cooking zone. Refer to “Technical information” chapter. 7.2 The noises during operation If you can hear: • • • • • crack noise: cookware is made of different materials (sandwich construction).
www.electrolux.com Heat setting Use to: Time (min) 9 - 12 Gentle fry: escalope, veal as nec‐ Turn halfway through. cordon bleu, cutlets, rissoles, essary sausages, liver, roux, eggs, pancakes, doughnuts. 12 - 13 Heavy fry, hash browns, loin steaks, steaks. 14 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips. 5 - 15 Hints Turn halfway through. Boil large quantities of water. Power function is activated. 7.
ENGLISH • • • Scratches or dark stains on the surface have no effect on how the hob operates. Use a special cleaner applicable for the surface of the hob. Use a special scraper for the glass. • 8.2 Cleaning the hob • Remove immediately: melted plastic, plastic foil, sugar and food with sugar. If not, the dirt can cause damage to the hob. Take care to avoid burns. Put the special scraper on the glass • 19 surface at an acute angle and move the blade on the surface.
www.electrolux.com Problem Possible cause Remedy The hob deactivates. You put something on the Remove the object from the sensor field. sensor field . Residual heat indicator does not come on. The zone is not hot be‐ If the zone operated suffi‐ cause it operated only for a ciently long to be hot, short time. speak to an Authorised Service Centre. Hob²Hood function does not work. You covered the control panel. Remove the object from the control panel.
ENGLISH Problem Possible cause 21 Remedy comes on. The Child Safety Device or Refer to "Daily use" chap‐ the Lock function operates. ter. comes on. There is no cookware on the zone. Put cookware on the zone. The cookware is incorrect. Use the correct cookware. Refer to “Hints and tips” chapter. The diameter of the bottom Use cookware with correct of the cookware is too dimensions. small for the zone. Refer to “Technical infor‐ mation” chapter. FlexiBridge function oper‐ ates.
www.electrolux.com 9.2 If you cannot find a solution... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period.
ENGLISH min. 2 mm A min. 2 mm B < 20 mm B > 20 mm min. 500 mm min 30 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm A min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min. 55mm +1 490+1mm 750 mm min. 12 mm min.
www.electrolux.com 10.5 Protection box If you use a protection box (an additional accessory), the front airflow space of 2 mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier. You can not use the protection box if you install the hob above an oven. 11. TECHNICAL DATA 11.1 Rating plate Modell EHX8575FHK Typ 58 GBD CR AU Induction 7.4 kW Ser.Nr. .................
ENGLISH 25 12. ENERGY EFFICIENCY 12.1 Product information according to EU 66/2014 Model identification EHX8575FHK Type of hob Built-In Hob Number of cooking zones 3 Number of cooking areas 1 Heating technology Induction Diameter of circular cook‐ Middle front ing zones (Ø) Right front Right rear 21.0 cm 14.5 cm 18.0 cm Lenght (L) and width (W) of the cooking area L 45.3 cm W 21.5 cm Left Energy consumption per Middle front cooking zone (EC electric Right front cooking) Right rear 172.
www.electrolux.
ENGLISH – failure to comply with any additional instructions supplied with the Appliance; b) the Appliance is modified without authority from Electrolux in writing; c) the Appliance’s serial number or warranty seal has been removed or defaced; d) the Appliance was serviced or repaired by anyone other than Electrolux, an authorised repairer or ASC. 8.
www.electrolux.com FOR SERVICE or to find the address of your nearest state service centre in Australia Please call 13 13 4 9 For the cost of a local call (Australia SERVICE AUSTRALIA ELECTROLUX HOME PRODUCTS www.electrolux.com.
ENGLISH 29
www.electrolux.
ENGLISH 31
867328238-A-112016 www.electrolux.
