Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine.
The innovative features of your gas hob Your new gas hob offers several innovative functions that distinguish it from conventional gas hobs. ! Electronic control of all functions. ! Touch controls to activate the hob functions simply by touching them with a finger. ! Electronic Timer to programme your cooking. ! Automatic reignition of the burners if the flame is accidentally extinguished. ! Residual heat indicator to advise that the pan supports and the burners are still hot.
Contents For the User The innovative features of your gas hob ......................................................................40 For your safety ..........................................................................................................42 Description of the hob ................................................................................................ 46 Operating instructions ................................................................................................
ENGLISH For your safety This new appliance is easy to use. Nevertheless, it is important to carefully read this booklet before installing or using the appliance for the first time. This will allow you to obtain best performance, avoid improper actions, use the appliance in complete safety and also respect the environment. Installation ! ! ! ! ! ! 42 Installation of the appliance and connection to the power supply must only be carried out by QUALIFIED PERSONNEL.
During use ! ! ! ! ! ! ! ! This instruction booklet must be kept with the appliance for any future reference. If the appliance is sold or transferred to another person, ensure the booklet is passed on to the new user. This hob is intended for domestic cooking only. It is not designed for commercial or industrial purposes. It is dangerous to modify or try to modify the characteristics of this product. Keep the appliance clean. Food residuals increase the risk of fire.
Environmental Information ! ! ! ! All the materials used are environment friendly and recyclable. Please make your contribution to safeguarding the environment by using the special differentiated collection channels. Dismantled or no longer used appliances are not worthless waste. Through ecological disposal, various materials used in the production of your appliance can be recycled. Find out about the current possibilities of disposal from your specialised dealer, or from your local Council.
Guide to Use the instructions The following symbols will be found in the text to guide you throughout the Instructions: Safety Instructions " Step by step instructions for an operation Hints and Tips Environmental Information IMPORTER: KUSSHAND CO.
Description of the hob Timer control zone Semirapid burner Auxiliary burner Rear left burner control zone Front left burner control zone 46 Semirapid burner Child Safety Control Main ON/OFF switch Rear right burner control zone Rapid burner Front right burner control zone
Operating instructions Before using the appliance, remove all packaging, including the advertising labels and any protective film. Touch Controls The hob is supplied with special Touch Controls. To operate your hob, simply touch the required control with a fingertip. Ensure to only touch one control at a time during use.
" How to light a burner 1. Touch the main ON/OFF Control for about 3 seconds to switch on the hob. The red indicator next to the touch control lights up, an acoustic signal sounds and the hob is ready to use. 2. Touch the Burner Ignition Control of the required burner. The flame level indicators located right below the and illuminate.
3. Within about 3 seconds, touch the or Decreasing Touch Increasing Control to light the burner. - If touch control is selected, the burner automatically lights at maximum flame level (all the flame level indicators illuminate). is selected, the - If touch control burner automatically lights at medium flame level (three flame level indicators illuminate). 4. To adjust the burner flame level, use the or Decreasing Touch Increasing Control.
"How to turn off a burner 1. To turn off a burner press the relevant Burner Ignition Touch Control . All the flame level indicators go off. The residual heat indicator remains on until the pan support and the burner have cooled down. "In case of ignition failure The hob ignition device generates a series of small sparks for about 6 seconds. If the flame does not light during this period, the gas flow to the burner is interrupted.
In case of accidental " extinguishing (automatic reignition) If the burner flame is accidentally extinguished (draughts, spilling of liquids, etc.), the gas flow is immediately interrupted. After about 20 seconds, the ignition device automatically repeats the ignition procedure. Upon reignition, the burner flame is first set at maximum level, then it is automatically adjusted to the level set before it was accidentally extinguished.
How to turn off all the " burners at once In case of unexpected safety hazard (spilling of liquids, children hazard, etc.), you can immediately turn off all the hob burners at once by touching the main ON/OFF . Control Burner Safety Cut-off " Function If you leave one or more burners lit and unattended for a long time (that is, you don’t touch any control for at least 4 hours), each lit burner is automatically turned off and a safety device is set on it.
" Protection overheating against If the hob is used intensively, e.g. several burners at maximum level for a long time, a temperature sensor detects possible overheating and automatically adjusts all the lit burners to minimum. If the hob temperature keeps rising although the flame level has been reduced, all the lit burners are automatically turned off and a safety device is set on all the four burners.
The red indicator next to the “Lock” symbol goes off and an acoustic signal sounds. It is highly recommended to activate the child safety function every time the hob is not operated. In case of a power failure, the hob stores the children safety function setting in the system memory. If the controls are locked at the time of the power failure, they will still be locked when the power is restored.
to programme a " How burner to switch off To programme a burner to switch off, proceed as follows: 1. If necessary, activate the hob by touching the main ON/OFF Control for about 3 seconds. 2. Light the burner and adjust the flame level or Decreasing using the Increasing controls (see par. “How to light a burner”). 3. Activate the Timer by touching the Timer and select the required Control burner by repeatedly touching the Timer Control . 4.
5. The timer starts the countdown a few seconds after the cooking time has been set. 6. During the last ten seconds, the timer starts beeping to advise that the cooking time is about to end. 7. An acoustic signal sounds at the end of the cooking time. To stop the acoustic . signal, touch the Timer Control To adjust the cooking time: 1. Touch the Increasing or Decreasing Control or at any time to adjust the time setting. To cancel the time setting: 1.
How to set the minute "minder function You can use the timer as a simple minute minder when none of the burners are operating. The hob must be activated in order to use the timer as a minute minder. Proceed as follows: 1. If necessary, activate the hob by touching the main ON/OFF Control for about 3 seconds. 2. Touch the Timer Control the timer. to activate 3. Touch the Increasing or Decreasing Control to set the required time (max. time: 99 minutes). 4.
Safety and energy saving advice For a correct use of the hob To ensure maximum burner efficiency and lower gas consumption, you should only use pots and pans with a flat bottom fitting the size of the burner used (see table). If you use a saucepan which is smaller than the recommended size, the flame will spread beyond the bottom of the vessel, causing the handle to overheat. Pots must never be placed onto the control zones. Always turn the flame down or off before removing pots from the burners.
Cleaning and maintenance Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply and wait until it has cooled down. This appliance cannot be cleaned with steam or with a steam cleaning machine. The Hob Top Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little washing up liquid has been added.
The Burners The cap and the crown of each burner are secured with two screws. To separate the two pieces, lift the cap, turn it upside down, then undo the two fixing screws as shown in the diagram. After a thoroughly cleaning, reassemble the two parts and refit the cap in its correct position on the burner. Frequently wash the burner caps and crowns using hot soapy water and remove marks with a mild paste cleaner.
Something not working Some operating problems may be solved with simple maintenance operations or and without the intervention of Technical Assistance. PROBLEM THE HOB DOES NOT WORK. CAUSE ! There are blown fuses in the domestic electrical system. Switches are turned off or there is no power at the power outlet. !Have the fuses replaced. ! The hob is not activated. !Touch the main ON/OFF Control . !Open the tap. ! The main gas supply tap is closed.
Instructions for the Installer Technical data Gas burner power Rapid burner (large) 2.9 kW (G20) - 2.7 (G30/G31) Semirapid burner (medium) Auxiliary burner (small) 1.9 kW 1.
Instructions for the installer ! ! ! ! The following instructions about installation and maintenance must be carried out by qualified personnel in compliance with the regulation in force. The side walls of the unit in which the hob is going to be installed, must not exceed the height of the working top. Avoid installing the appliance in the proximity of inflammable materials (e.g. curtains, tea towels etc.). The appliance must be electrically disconnected before all interventions.
The adjustable connection is fixed to the comprehensive ramp by means of a threaded nut G 1/2". Interpose the sealing between the components as shown in the diagram. Screw the parts without forcing, adjust the connection in the required direction and tighten everything. The appliance, before leaving the factory, has been tested in order to give you the best results.
Electrical connection The appliance is designed to be connected to 220 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force. Before the appliance is connected: 1. check that the main fuse and the domestic installation can support the load (see the rating label); Replacing the power cable When replacing the cable, only use H05V2V2-F (T90) type cables suitable for the load and working temperature.
Replacing the power cable When replacing the cable, only use H05V2V2-F (T90) type cables suitable for the load and working temperature. Also, the yellow/green earth wire must be about 2 cm longer than the phase and neutral wires (see figure). After connection, test the heating elements by switching them on for about 3 minutes.
Adaptation to different types of gas Replacing the injectors 1. Remove the pan supports. 2. Remove the burner caps and crowns. 3. Using a 7 mm socket spanner unscrew and remove the injectors, then replace them with the ones required for the new type of gas (see table “Burner characteristics”). 4. Reassemble the parts, following the same procedure backwards. 5. Replace the Gas Type Label (located near the gas supply connection) with the one corresponding to the new type of gas.
Setting the hob for the new gas type 1. If necessary, activate the top by touching for about the main ON/OFF Control 3 seconds. 2. Touch the Timer Control repeatedly to select the auxiliary burner (front left burner) on the burner selection display. 3. Touch the Increasing Control and hold the finger on it until the value 99 appears on the time display. Then, touch and hold the the Decrasing Control finger on it until the value 80 is displayed. 4. Then, touch the Increasing Control until 83 is displayed.
5. Touch the Decreasing Control to select the required type of gas. 6. After selecting the type of gas, switch off the hob touching the main ON/OFF . Control 7. Touch the main ON/OFF Control again to reactivate the hob. The appliance is automatically set to the normal “User Mode”. 8. Light all the burners and adjust their flame to minimum, in order to check the flame stability (visual check). 9. At the same time, check the flame aspect (visual check).
Building In A = Auxiliary burner SR = Semirapid burner R = Rapid burner Dimensions are given in millimetres SR SR R A 51 73 0 0 Fig. 1 The hob is designed to be inserted in modular kitchen units with depth of 550 600 mm and having proper characteristics. The building-in is also possible in modular units with a 600 mm width: in this case, the cut-out in the work top must be carried out as shown in Fig. 2. The worktop must be at least 30 mm thick.
Fitting the hob to the worktop Before fitting the hob into the cut out, an adhesive seal must be fitted to the underside outside edge of the hob. It is essential that no gaps are left in this seal in order to prevent spillage near the hob seeping into the cabinet below. " Proceed as follows: 1. Remove the pan supports, the burner caps and crowns and turn the hob upside down, taking care that the spark plugs and the thermocouples are not damaged in this operation. 2.
Installation possibilities Building over a kitchen unit with door Proper arrangements must be taken in designing the furniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig. 5. The panel fitted under the hob ("a") should be easily removable to allow easy access if technical assistance is needed. See also Fig. 2. The space behind the kitchen unit ("b") can be used for connections. Fig.
Hanging furniture units or hoods must be placed at 650 mm. minimum from the hob (Fig. 6). The electronic gas hob can only be installed over a built-in oven equipped with cooling fan. If the hob is installed over a built-in oven equipped with pyrolytic cleaning function, the hob must not be in use while the pyrolytic cleaning cycle of the oven is running. Fig. 6 Fig. 7 FO 0938 Fig.
Technical assistance and spare parts Before leaving the factory this appliance was tested and verified by specialized personnel, in order to ensure best performance. Any repairs or intervention which may become necessary, must be carried out with utmost care and attention. For this reason, this hob should only be repaired or serviced by an authorised Service Engineer and only genuine approved spare parts should be used.
www.electrolux.co.kr 35693-8501 R.
