C e r a m P l a c a e m Ê å ñ á ì é ê Þ i c v ì i á g l a s s h d r o c e r ã å é ñ é ê Þ o â b m i å ó c ô o ß á Installation and Operating Instructions Montagem e indicações de utilização Ïäçãßåò óõíáñìïëüãçóçò êáé ÷ñÞóçò EHS 6650 P 822 924 230-A-100603-01 g p r
Dear customer, Please read these operating instructions carefully. Pay particular attention to the section “Safety information” on the first few pages. Please retain these operating instructions for later reference. Pass them on to possible new owners of the appliance. The following symbols are used in the text: 1 Safety instructions Warning: Information concerning your personal safety. Important: Information on how to avoid damaging the appliance.
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions 1 Safety The safety aspects of this appliance comply with accepted technical standards and the German Appliance Safety Law. However, as manufacturers we also believe it is our responsibility to familiarise you with the following safety instructions. Safety When Cleaning • For safety reasons do not clean the appliance with a steam jet or high pressure cleaner. • Clean the hob in accordance with the maintenance and cleaning instructions in this manual.
2 Disposal Disposing of the packaging material All materials used can be fully recycled. Plastics are marked as follows: • >PE< for polyethylene, as used for the outer wrapping and the bags inside. • >PS< for polystyrene foam, e.g., as used for the padding materials. They are completely free of CFCs. Disposal of old appliances 1 Warning: Before disposing of old appliances please make them inoperable so that they cannot be the source of danger.
The Key Features of Your Appliance • Ceramic glass cooking surface: The appliance has a ceramic glass cooking surface and 4 rapid response cooking zones. The particularly powerful radiant heater elements significantly shorten the amount of time taken for the zones to heat up. • Sensor fields: Your appliance is operated using Touch Control sensor fields. • Cleaning: The advantage of the ceramic glass cooking surface and the sensor fields is their accessibility for cleaning.
Description of the Appliance Cooking zones and control panel Single ring cooking zone 1200W Triple ring cooking zone 2300W Casserole zone 2400W Control panel Single ring cooking zone 1200W „Timer“ with control display Cooking zone selection with displays for heat setting/ residual heat Booster button Triple ring indicator Casserole zone indicator Heat setting selector Lock Mains button On/Off 7
Digital Displays The four display fields that are assigned to the four cooking zones display: – _, after being switched on and when the safety function causes an automatic cut-out, – 0 when a cooking zone is selected, – 1 to 9, depending on the selected heat setting, – a during automatic warm up, – h when there is residual heat, – f when there is a fault.
Before Using for the First Time Initial Cleaning Wipe the ceramic glass surface with a damp cloth. 1 Important: Do not use any caustic, abrasive cleaners! The surface could be damaged. Operating the Hob 3 When a cooking zone is switched on, it may hum briefly. This is a characteristic of all ceramic glass cooking zones and does not impair either the function or the life of the appliance.
Cooking Zone Selection To select the required cooking zone touch the corresponding sensor field for approx. one second. A zero with a decimal point will light up in the appropriate cooking zone display window 0. 3 The decimal point indicates that settings may only be made for this cooking zone. Heat Setting Selection For setting and adjusting the heat setting (1 to 9) for the selected cooking zone. Use sensor field + to increase the heat setting. Lower the heat setting with sensor field -.
Switching the Triple Ring Cooking Zone On and Off Depending on the size of the pot or pan, when using the triple ring cooking zone each of the larger cooking rings can be switched on in turn, in addition to the smallest cooking zone, using the “booster” sensor field on the control panel. 3 These can only be activiated if the smaller ring is already switched on. 1. Select the appropriate cooking zone. 2. Set the required heat setting. 3. Touch the “booster” sensor field. The middle ring is switched on.
Switching the Casserole Zone On and Off 1. Select the appropriate cooking zone. 2. Set the required heat setting. 3. To switch the casserole zone on or off place your finger flat on the “booster” touch control sensor field, until the control indicator comes on or goes off.
Switching off a Cooking Zone 1. Select the required cooking zone with the cooking zone sensor fields. 2. Touch sensor fields + and - simultaneously to switch off or turn sensor field - back to zero. 3 A cooking zone may only be switched off when the decimal point is on in the cooking zone display. Residual Heat Indicator When an individual cooking zone or the entire hob is switched off, any residual heat is shown with an h (for “Hot”) in the digital display for the appropriate cooking zones.
Cooking with the Automatic Warm up Function All four of the hob's cooking zones can be controlled in nine stages and have an automatic warm up function: – 1, lowest heat setting – 9, highest heat setting – a, automatic warm up function When you select the required heat setting using the + sensor field, the cooking zone will work for a specific time on full power and then switch automatically to the set heat setting. The duration of the automatic warm up function depends on the heat setting selected.
Cooking without the Automatic Warm up Function If you wish to use the cooking zone without automatic warm up, select the required heat setting with the - sensor field. 1. Switch on the appliance and select the desired cooking zone using the cooking zone selection buttons. 2. Touch sensor field - to select the required heat setting from 9 to 1. 3 You can adjust the heat setting at any time using the + and - buttons, providing the cooking zone has been selected. Switching off a cooking zone 1.
Timer A cooking duration can be set with the integrated timer for all cooking zones. When the end of the cooking duration is reached, the cooking zone switches itself off automatically. 1. Using the cooking zone sensor field, select the required cooking zone and set the required heat setting. 2. Touch the TIMER W sensor field to activate the timer function for this cooking zone. 00 will appear in the display. 3.
Displaying the remaining cooking time If you select a cooking zone which is in timer mode, the cooking time still remaining appears in the timer display window. Using the timer to measure short periods of time (“Minute Minder”). 1 Important! None of the cooking zones should be set with the Timer! 1. Touch the "On/Off" sensor field for around two seconds. The digital display _ flashes. 2. Touch the TIMER W sensor field to activate the Timer function. 3.
Uses, Tables and Tips Pans The better the pan, the better the results. • You can recognise good pans by their bases. The base should be as thick and flat as possible. • Pay particular attention when buying new pans to the diameter of the base. Manufacturers often give only the diameter of the upper rim. • Pots with aluminium or copper bases can cause metallic discolouring on the glass ceramic surface, which is very difficult or impossible to remove.
Advice on Cooking with and without Automatic Warm up The automatic warm up function is suitable for: • dishes that start off cold, are heated up at high power and do not need to be continually watched when cooking on the selected heat setting, • dishes that are put in a hot frying pan.
Typical Heat Settings The information given in the following tables is for guidance. The heat setting required for cooking depends on the quality of the pans and on the type and quantity of food. Switch Setting Automatic Warm Up Time1) (Min.) 9 8 4.5 7 3.5 6 2.5 5 8.5 4 6.5 3 4.8 2 3.0 1 1.
Cleaning and Care Hob 1 Important: Cleaning agents must not come into contact with the hot ceramic glass surface! All cleaning agents must be removed with plenty of clean water after cleaning because they can have a caustic effect when the rings are next heated! Do not use any aggressive cleaners such as grill or oven sprays, coarse scourers or abrasive pan cleaners. 3 Clean the ceramic glass surface after each use when it is warm to the touch or cold. This will avoid spillages becoming burnt on.
1 Problem Dirt 1. Remove burnt-on sugar, melted plastic, aluminium foil or other meltable materials with a glass scraper immediately and while still hot. 1 Important: There is a risk of burning yourself when the glass scraper is used on a hot cooking zone! 2. Then clean the hob normally when it has cooled down. 3 Ifmelted the cooking zone on which something has has already cooled down, warm it up again for cleaning.
What to do if … Rectifying faults It is possible that faults have been caused by a minor error, which you can correct yourself with the help of the following instructions. Do not attempt any further repairs if the following instructions do not help in each specific case. 1 Warning! Repairs to the appliance are only to be carried out by approved service engineers. Improperly effected repairs may result in considerable risk to the user.
Installation Instructions 1 Important! The new appliance may only be installed and connected by qualified personnel. Please observe this instruction, otherwise the warranty will not cover any damage that may occur.
1 Safety Instructions for the Installer • A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm. Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors. • In respect of fire protection, this appliance corresponds to EN 60 335-2-6.
Electrical Connection Before connecting, check that the nominal voltage of the appliance, that is the voltage stated on the rating plate, corresponds to the available supply voltage. The rating plate is located on the lower casing of the hob. The heating element voltage is AC230V~. The appliance also works perfectly on older networks with AC220V~.
Service In the “What to do if …” section a number of malfunctions are listed that you can rectify yourself Look there first if a fault occurs. Is it a technical fault? If so, please contact your customer service centre. (You will find addresses and telephone numbers in the section “Customer Service Centres”.) Always prepare in advance for the discussion.
Assembly / Montagem / ÔïðïèÝôçóç 80
81
82
83
822 924 230-A-100603-01 Subject to change without notice Sujeito a alterações sem aviso prévio Yðüêåéôáé óå áëëáãÝò ÷ùñßò ðñïåéäïðïßçóç The Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.
