user manual Ceramic glass hob EHS 36020 U
We were thinking of you when we made this product
electrolux 3 Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You will find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine.
electrolux contents Contents Operating Instructions Safety instructions Description of the Appliance Operating the appliance Tips on Cooking and Frying Cleaning and Care What to do if … Installation Instructions Assembly Installing more than one Frontline hob Guarantee/Customer Service Service 5 5 7 10 18 21 23 25 26 30 36 38 The following symbols are used in this user information: 1 3 2 z Warning! This must be read! Important advice for the safety of persons and information on avoiding damage to the
operating instructions electrolux 5 Operating Instructions Safety instructions Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty. Correct use • This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.
electrolux safety instructions Safety when cleaning • For cleaning, the appliance must be switched off and cooled down. • For safety reasons, the cleaning of the appliance with steam jet or highpressure cleaning equipment is not permitted. How to avoid damage to the appliance • The glass ceramic can be damaged by objects falling onto it. • The edge of the glass ceramic can be damaged by being knocked by the cookware.
description of the appliance electrolux 7 Description of the Appliance Cooking surface layout Single cooking zone 1200W Double ring cooking zone 700/1700W Frontline strip Control panel Control panel layout Warm up pilot Child lock pilot light light Heat setting indicator Heat setting selection Child lock Automatic warm-up function Double ring pi- Heat setting lot light indicator Timer indicator Timer selection Timer Warm up pilot light On/Off pilot light Automatic warm-up On/Off Outside ring O
electrolux description of the appliance Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.
description of the appliance electrolux 9 Displays Display ¾ u ¿-Ç e h l _ Description Cooking zone is switched off Keep warm setting Keep warm setting is set Heat settings Heat setting is set Fault Malfunction has occurred Residual heat Cooking zone is still hot Child safety device Child safety device is engaged Automatic switch off Switch off is active. Residual heat indicator Warning! Risk of burns from residual heat.
electrolux operating the appliance Operating the appliance Switching the appliance on and off Control panel Display Pilot light Switch on Touch for 2 seconds lights up Switch off Touch for 1 second ¾/h h / none goes out After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
operating the appliance electrolux 11 Using the automatic warm-up function All cooking zones are equipped with an automatic warm-up function. The automatic warm-up function sets the cooking zone to the highest setting for a certain period of time and then automatically switches back to the cooking setting that was originally set.
electrolux operating the appliance Using the child safety device The child safety device prevents unintentional use of the appliance. The child safety device can only be switched on and off, if the appliance is switched on, but no cooking zone has a heat setting set. Activating the child safety device Step Control panel Indicator/Signal 1. Switch on the appliance (Do not set a heat setting) ¾ 2. Touch l Appliance switches off. The child safety device is activated.
operating the appliance electrolux 13 Overriding the child safety device The child safety device can be released in this way for a single cooking session; it remains activated afterwards. Step 1. control panel Switch on the appliance 2. and zones Indicator/Signal l touch any one of the cooking acoustic signal Until the appliance is next switched off, it can be used as normal. After overriding the child safety device, a heat setting or a function must be set within approx.
electrolux operating the appliance Using the timer All cooking zones can use each use one of the two timer functions at the same time.
operating the appliance electrolux 15 Setting the time Step 1. 2. Control panel Indicator Select cooking zone Pilot light for the selected cooking zone flashes Touch or 0 to 99 minutes After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes.
electrolux operating the appliance Displaying the time remaining for a cooking zone Step 1. Control panel field Display Select cooking zone Pilot light of the cooking zone selected flashes faster The time remaining is displayed After a few seconds the pilot light flashes more slowly. Switching off the acoustic signal Step Control panel field Acoustic signal 1. Touch Acoustic signal to acknowledge. Acoustic signal stops.
operating the appliance electrolux 17 Automatic switch off Cooking surface • If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. • If one or more sensor fields are covered for longer than approx. 10 seconds, e.g. by a pan placed upon it, a signal sounds and the cooking surface switches off automatically.
electrolux tips on cooking and frying Tips on Cooking and Frying Information on acrylamides According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures and not browning foods too much. Cookware • You can recognise good cookware from the bottoms of the pans. The bottom should be as thick and flat as possible.
tips on cooking and frying electrolux 19 Energy saving Always place cookware on the cooking zone before it is switched on. If possible, always place lids on the pans. Switch cooking zones off before the end of the cooking time, to take advantage of residual heat. Bottom of pans and cooking zones should be the same size.
electrolux tips on cooking and frying Examples of cooking applications The information given in the following table is for guidance only. Heat setting Cookingprocess 0 suitable for Cooking time Tips/Hints Off position Keeping food warm Keeping cooked foods warm as required Cover Melting Hollandaise sauce, melting butter, chocolate, gelatine 5-25 mins. Stir occasionally Solidifying Fluffy omelettes, baked eggs 10-40 mins.
cleaning and care electrolux 21 Cleaning and Care Take care! Risk of burns from residual heat. Warning! Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. Warning! Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1. Wipe the appliance with a damp cloth and a little washing up liquid. 2. Rub the appliance dry using a clean cloth.
electrolux cleaning and care Removing deposits 1. Place a scraper on the glass ceramic surface at an angle. 2. Remove residues by sliding the blade over the surface. 3. Wipe the appliance with a damp cloth and a little washing up liquid. 4. Rub the appliance dry using a clean cloth.
what to do if … electrolux 23 What to do if … Problem The cooking zones will not switch on or are not functioning Possible cause Remedy More than 10 seconds have passed since the appliance was switched on Switch the appliance on again.
electrolux disposal Disposal Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. Old appliance W on the product or on The symbol its packaging indicates that this product may not be treated as household waste.
installation instructions electrolux 25 Installation Instructions Safety instructions Warning! This must be read! The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed.
electrolux assembly Assembly
assembly electrolux 27
electrolux assembly
assembly electrolux 29
electrolux installing more than one frontline hob Installing more than one Frontline hob Additional parts: cross bar(s), heat resistant silicon, rubber block, shaving blade. Only use special heat-resistant silicon.
installing more than one frontline hob electrolux 31 Installing more than one appliance 1. Work out the size of the cut-out section and saw it out. 2. Remove Frontline strip from the appliances by hand (magnetic fastening). 3. Lay the appliances one at a time on something soft (for example a blanket) with the underside facing upwards. 4. Screw / clip fixing plates / retaining grips into the appropriate holes in the protective boxes. 5. Place first appliance in the cut-out.
electrolux installing more than one frontline hob 6. Put silicon on the appliance corners that will touch one another. Put silicon on the end of the cross bar. 7. Loosely screw in fixing plates / retaining grips from below on the worktop and on the connecting cross bar.
installing more than one frontline hob electrolux 33 8. Place Frontline strips on the appliances. Check that the Frontline strips are in line with one another. 9. Tighten the fixing plate / retaining grip screws. 10.Inject a line of silicon into the gap between the appliances. 11.Dampen silicon line with a little soapy water. 12.Press rubber block hard against the glass ceramic and draw it slowly along the gap. 13.Leave silicon until the next day to harden. 14.
electrolux installing more than one frontline hob Overview of all appliance widths 180 mm Worktop-mounted cooker hood 360 mm Glass ceramic cooking surface with 2 radiation cooking zones Glass ceramic cooking surface with 2 induction cooking zones Gas hob with 2 burners Grill Grill/Deep fat fryer Wok 580 mm Glass ceramic cooking surface with 4 radiation cooking zones Gas hob with 4 burners 720 mm Glass ceramic cooking surface with 4 radiation cooking zones Glass ceramic cooking surface with 4 induction c
electrolux 35 Rating Plate 941 177 724 ELECTROLUX 2,9 kW 220 V 60 Hz HFC 236 EHS36020U
electrolux guarantee/customer service Guarantee/Customer Service European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law.
guarantee/customer service electrolux 37 www.electrolux.com p t b Albania +35 5 4 261 450 Rr. Pjeter Bogdani Nr. 7 Tirane Belgique/België/Belgien +32 2 363 04 44 Bergensesteenweg 719, 1502 Lembeek Èeská republika +420 2 61 12 61 12 Budìjovická 3, Praha 4, 140 21 Danmark +45 70 11 74 00 Sjællandsgade 2, 7000 Fredericia Deutschland +49 180 32 26 622 Muggenhofer Str. 135, 90429 Nürnberg Eesti +37 2 66 50 030 Mustamäe tee 24, 10621 Tallinn España +34 902 11 63 88 Carretera M-300, Km.
electrolux service Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. In order to be able to assist you quickly, we require the following information: – Model description – Product number (PNC) – Serial number (S No.
www.electrolux.
