I N F O GB OPERATING AND ASSEMBLY INSTRUCTIONS GLASS CERAMIC HOB NOTICE D'UTILISATION ET DE MONTAGE PLAN DE CUISSON VITROCÉRAMIQUE F ISTRUZIONI PER L'USO E PER IL MONTAGGIO I PIANI DI COTTURA DI CERAMICA VETROSA EHO 600 EHO 600 K
DEAR CUSTOMER We congratulate you on choosing a ceramic hob of ELECTROLUX. Thus you chose quality, innovation and durability. These operating and assembly instructions will allow you to become acquainted with the appliance and to do everything within its possibilities.
CONTENT Please note in particular ......................................... 4 Unpacking and control ........................................... 5 Before the first use ................................................ 5 Description of appliances ...................................... 5 Technical data ....................................................... 6 Operating instructions ............................................ 6 Cooking equipment ................................................ 7 Maintenance ...
PLEASE NOTE IN PARTICULAR Before using the hob for the first time, read the operating and assembly instructions carefully. You protect yourself and avoid damage of your appliance. The appliance must be installed by a qualified electrician. Use the hob only upon its installation. This protects you from touching electric parts. Repairs of electric appliances must be undertaken by qualified electricians only. Improper repairs can cause serious harm and danger for the user.
UNPACKING AND CONTROL Please examine the appliance for any damage sustained during transportation! If the appliance is damaged please immediately inform the forwarding company before the appliance is connected. The packing material should be disposed properly.
TECHNICAL DATA Hob dimensions length width height 572 mm 502 mm 49 mm Cutout dimensions length width 560 mm 490 mm Voltage 230 V ~ 50 Hz Total power Rating plates Typ 015.0 Instr. No. EHO 600 Prod.No. 941 592 656 Ser.No. 5.9 kW 230 V ~ 50 Hz 5.9 kW SWISS MADE Typ 015.0 Instr. No. EHO 600 K Prod.No. 941 592 657 Ser.No. 5.
OPERATING INSTRUCTIONS Switching on the halogene cooking zone (1circuit) The halogene cooking zone is heated up very rapidly compared to the normal one-circuit cooking zone. It can be compared with a gas cooking zone, without having its inconveniences. When switched on the halogene lamps immediately effect their full heating power. Use the halogene cooking zone to heat up food quickly. COOKING EQUIPMENT Specially tested cooking and frying pans for ceramic hobs exist. Pay attention to the according sign.
MAINTENANCE The maintenance remains the same for glass and ceramic hobs. Never use aggressive detergents or scouring powder and sponges with abrasive surfaces. Cleaning after each use Slight, not burnt soiling has to be wiped off with a damp cloth without using detergents. The use of detergents may lead to discolouring. These heavy stains can not be wiped off easily by the first attempt and sometimes not even with a special detergent. Burnt soiling has to be removed with a scraper.
INSTALLATION AND ELECTRICAL CONNECTION Cut out worktop to prescribed measurements of templates (saw exactly along the scribing). Check seal for perfect fit and overall cover. Lower the ceramic hob into place and align correctly. Fastening according to Fig. 1 Tighten bracket against the underside of the worktop. Using a standard or Phillips screwdriver, tighten the tension clamps evenly starting at the centre and moving diagonally until the built-in rim is tight on the worktop.
PROBLEM DETECTION AND REPAIR DEVICE Repairs on electrical appliances must be undertaken by qualified electricians only. Improper repairs can cause serious harm and danger for users. The appliance is only disconnected from the mains when the fuse is turned off or the mains connection is interrupted You are able to clear the following defects: When the cooking zone does not heat up after you switched it on? =>Make sure that the fuse is turned on.
01.
