User manual Ceramic Glass Induction Hob EHI935BA EHI938BA
WE’RE THINKING OF YOU hank you for purchasing an Electrolux appliance. T You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Welcome to Electrolux.
safety information lease read the user manual carefully and store in a handy P place for later reference. Pass the user manual on to possible new owners of the cooktop. Warning! Fire danger! Overheated fats and oils can catch fire very quickly. Read the following carefully to avoid damage or injury.
INSTALLATION INSTRUCTIONS Safety instructions Warning! Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier. Sticking on the seal • • Only an authorised service technician can install, connect or repair this appliance. Use only original spare parts. Only use built-in appliances after you assemble the appliance into correct built-in units and work surfaces that align to the standards.
For EHI935BA R 5 mm 600 mm +1 380 +1 mm 880 mm = = min. 38 mm For EHI938BA min. 5 mm R 5 mm = 600 mm R 5 mm392 +1 mm 892 +1 mm 600 mm = +1 380 +1 mm 880 mm = = For both models min. 20 mm R 5 mm = min. 25 mm min. min. 5 38 mmmm min. 5 mm 600 mm +1 392 +1 mm 892 mm = min. 20 mm min. 25 mm min. 5 mm Important! If you use a protection box (additional accessory), the front ventilation space of 5mm and protective floor directly below the appliance are not necessary.
Product description Cooking surface layout 1 2 3 1 2 3 4 Induction cooking zone 2300W, with Power function 3200W Induction cooking zone 2300W, with Power function 3200W Induction cooking zone 2300W, with Power function 3200W Control panel 4 Control panel layout 1 2 3 4 5 6 7 11 8 9 10 Use the sensor fields to operate the appliance. Indicators, displays and sounds tell which functions operate.
Operating instructions Heat setting displays Display Description The cooking zone is off The cooking zone operates The function operates The automatic heat up function is on Power function is on There is a malfunction + digit OptiHeat Control (3 step Residual heat indicator) : continue cook / keep warm / residual heat Lock / The child safety function is on Not correct cookware or too small or no cookware on the cooking zone The automatic switch off is on OptiHeat control (3 step residual heat indic
Operating instructions Using the timer The heat setting Touch the control bar at the heat setting. Change to the left or the right, if it is necessary. Do not release before you have a correct heat setting. The display shows the heat setting. P Automatic heat up Count down timer Use the Count Down Timer to set how long the cooking zone operates for one cooking session. Set the Count Down Timer after the selection of the cooking zone. You can set the heat setting before or after you set the timer.
Operating instructions Stop+go function sets all cooking zones that operate to a The Keep Warm setting( ). When operates, you cannot change the heat setting. does not stop the timer function. • To activate this function touch . comes on. • To deactivate this function touch . The heat setting that you set before comes on. Lock You can lock the control panel, but not . It prevents an accidental change of the heat setting. First set the heat setting. To start this function touch .
HELPFUL HINTS AND TIPS Energy saving Use the induction cooking zones with suitable cookware. Put the cookware on the cross which is on the cooking surface. Cover the cross fully. The magnetic part of the bottom of the cookware must be 120mm minimum. Recommended size for optimum performance is up to 240mm. Induction cooking zones adapt to the dimension of the bottom of the cookware automatically. You can cook with the large cookware on two cooking zones at the same time.
HELPFUL HINTS AND TIPS Examples of cooking applications Heat setting The data in the table is for guidance only.
care and cleaning Problem Possible cause and remedy Red rings, limescale or water rings, shiny metallic or other discolouration, stratches/ shadows, bubbles or other miscellaneous marks or stains on ceramic glass cooktop surface Use a ceramic glass cleaner such as Cerapol. Cleaning/ maintenance of the cooktop surface is not covered under warranty. If a service call is placed to clean the cooktop you will be charged for the visit.
care and cleaning Clean the appliance after each use. Always use cookware with clean bottom. Warning! Sharp objects and abrasive cleaning agents will damage the appliance. For your safety, do not clean the appliance with steam blasters or high-pressure cleaners. Scratches or dark stains on the glass ceramic have no effect on how the appliance operates. To remove the dirt 1. Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the dirt can cause damage to the appliance.
Notes
Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: BUILT-IN OVEN, COOKTOP AND FLOOR MOUNTED COOKER This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance. 1.
Electrolux Home Products Australia telephone: 1300 363 640 fax: 1800 350 067 email: customercare@electrolux.com.au web: www.electrolux.com.au Electrolux Home Products New Zealand telephone: 0800 234 234 fax: 0800 363 600 email: customercare@electrolux.co.nz web: www.electrolux.co.nz The Thoughtful Design Innovator.
