Gas hob - Газовая варочная поверxноcть INSTRUCTION BOOKLET РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ Mod./ Mîä.
ENGLISH Important safety information These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance. About Installation, Cleaning and Manteinance • • • • • • • • • It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations. Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work.
Contents For the Installer For the User Important safety information 2 Technical Data 6 Instruction for the User 4 Instruction for the Installer 6 Maintenance and cleaning 5 Electrical connection 7 Service and original Spare Parts 11 Adaptation to different types of gas 8 European guarantee 11 Building In 9 Environmental Information • • After installation, please dispose of the packaging with due regard to safety and the environment.
Instruction for the User Hob Burners Control Knobs The hob burners control knobs are situated on the hob front panel. The symbols on the knobs mean that : " there is no gas supply there is maximum gas supply there is minimum gas supply ! Lighting the Burners • For easier lighting, proceed before putting a pan on the pan support. • Push the relevant knob down and turn it anti-clockwise until it reaches the "maximum" position ( • • ).
Maintenance and cleaning Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. Wash the enamelled components with warm soapy water. Never use abrasive cleaners Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food.
Technical data Gas Burners Rating Hob recess dimensions Rapid Burner (big) 3,0 kW (G20 - 20 mbar) Semirapid Burner (medium) 2,0 kW (G20 - 20 mbar) Auxiliary Burner (small) 1,0 kW (G20 - 20 mbar) Class 3 Appliance Category II2H3+ Setting Natural Gas G20 - 20 mbar Length Width Gas connection Electric Supply 560 mm 480 mm G 1/2" 230 V 50 Hz Instruction for the Installer " " " " The following instructions about installation and maintenance must be carried out by qualified personnel in compliance with
Electrical connection The appliance is designed to be connected to 230 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force.
Adaptation to different types of gas ! Injectors replacement • • • Remove the pan supports. Remove the burner's caps and crowns. With a socket spanner 7 unscrew and remove the injectors (Fig. 7), and replace them with the ones required for the type of gas in use (see Table 2). Reassemble the parts, following the same procedure backwards. Replace the rating label (placed near the gas supply pipe) with the relevant one for the new type of gas supply.
Building In SR SR A R 51 580 0 Fig. 9 A = Auxiliary burner SR = Semi rapid burner R = Rapid burner This hob can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in Fig. 9. Installation and Assembly These hobs can be installed in a kitchen unit with an opening for insertion whose dimensions are shown in Fig. 12. The edge of the cut out must have a minimum distance from the rear wall of 55 mm.
Possibilities for insertion Kitchen unit with door Proper arrangements must be taken in designing the forniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig. 13. The panel fitted under the hob should be easily removable to allow an easy access if a technical assistance intervention is needed. Kitchen unit with oven The hob recess dimensions must comply the indication given in Fig.
Service and original spare parts This appliance, before leaving the factory, has been tested and studied by many experts and specialists, in order to give you the best results. Any repair work which needs to be carried out should be done with the utmost care and attention. For this reason we recommend that for any problem you contact the dealer who sold it to you, or our nearest authorized Service Centre, specifying the nature of the problem, the appliance model (Mod.), the product number (Prod. No.
