Spec Sheet
Laundry
Range
The right amount
of care
Refrigeration
Dimension Guide
Please note! Dimensions to be used as a guide only. All customers MUST refer to the user manual supplied with the product for detailed installation instructions.
© 2019 Electrolux Home Products Pty Ltd. EDIM_FrenchDoorSingleDrawer_Jan19
French door with single drawer
models:
Door width
(W)
Total depth
(D)
Maximum
height (H)
Cabinet
width (W1)
Cabinet depth
(D1)
Depth door
open (D2)
EHE5267BB, EHE5267SB 796 781 1725 790 641 1055
If you have a cupboard above the
refrigerator with a rear gap of less than
100mm (Y), recommended minimum
clearance at the top of the refigerator
increases from 30mm to 70mm (X).
Please note: If 5mm side clearance,
the fridge cabinet must sit at least
5mm proud of kitchen cabinetry for
doors to open. A 5mm side clearance
requires 50mm rear clearance and
50–90mm clearance above.
When positioned in a corner area,
spacing of at least 300mm on the
hinge side will allow the doors to open
enough to enable the removal of bins
and shelves.
Front face of bench
aligned to front corner
edge of cabinet.
X
Y
Minimum Recommended Airspaces
French Door with single drawer
Models:
EHE5267BB, EHE5267SB
Important! Please ensure that the access to your kitchen (including doorways, corridors, island benches, etc) allows sufficient clearance to move your fridge into position.
For connection kit installation instructions go to electrolux.com.au
H2
W
H
Please note:
If 5mm side clearance,
the fridge cabinet must sit at
least 5mm proud of kitchen
cabinetry for doors to open.
A 5mm side clearance
requires 50mm rear
clearance and 50–90mm
clearance above.
50mm
30mm
30mm
CABINET
DOORDOOR
Minimum
recommended
airspace
Minimum Recommended Airspaces
When positioned
in a corner area,
spacing of at
least 300mm on
the hinge side
will allow the
doors to open
enough to
enable the
removal of bins
and shelves.
Front face
of bench
aligned to
front corner
edge of
cabinet.
300mm300mm
D1
D2
W1
D
90°
X
Y
If you have a cupboard
above the refrigerator with
a rear gap of less than
100mm (Y), recommended
minimum clearance at the
top of the refigerator
increases from 30mm to
70mm (X).
300 mm
300 mm