Built-in Hob - Encimera - Placa de encastrar INSTRUCTION BOOKLET MANUAL DE INSTRUCCIONES INSTRUÇÕES DE UTILIZAÇÃO Mod.
English Important Safety Information These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance. Installation • • • • It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations. Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work.
Contents For the User Important Safety Information 2 Description of the appliance 3 Operation 4 Hints and tips 4 Cleaning and maintenance 5 - MANUFACTURER: ELECTROLUX HOME PRODUCTS ITALY S.p.A. Viale Bologna, 298 I-47100 FORLÌ (Italy) For the Installer Instruction for the Installer 6 Possibilities for insertion 7 Electrical connection 8 This appliance complies with the following E.E.C.
Operation Electric Hotplates To switch on a hotplate, turn the relevant control knob anticlockwise to the required heat setting. The control knob is numbered 1 - 6 0 - OFF 1 - Minimum 6 - Maximum. We recommend the plates are switched to maximum (6) for a short while to boost the plate, and then adjusted to the required setting. Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite. Pilot Light The Pilot Light will come on each time a cooking zone is switched on.
Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply. Never use steam or a steam cleaning machine to clean the appliance. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. The Hob Top Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little washing up liquid has been added.
Instruction for the Installer Technical Data 51 Rear hotplate Frontl hotplate 0 Total energy Voltage 180 mm Ø 145 mm Ø 1,5 kW 1,0 kW 2,5 kW 230 V - 50 Hz Hob recess dimensions 29 0 Length Width 490 mm. 270 mm. Insertion and assembly Dimensions for building in a kitchen unit are given in Fig. 2. The side walls of the unit must not exceed the height of the hob. Avoid installing the appliance in the proximity of inflammable materials (e.g. curtains, tea towels, etc.).
Possibilities for insertion Building over a kitchen unit with door Proper arrangements must be taken in designing the furniture unit, in order to avoid any contact with the bottom of the hob which can be hot when in operation. The recommended solution is shown in Fig. 4. The panel fitted under the hob ("a") should be easily removable to allow easy access if technical assistance is needed. The space behind the kitchen unit ("b") can be used for connections.
Electrical connection The appliance is designed to be connected to 230 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force.
