user manual Ceramic glass induction hob EHD80170P
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Safety information Installation Description of the appliance Operating the appliance 2 3 5 6 Helpful hints and tips Care and cleaning What to do if... Environment concerns 8 9 10 11 Subject to change without notice Safety information For your safety and correct operation of the appliance, read this manual carefully before installation and use.
electrolux 3 • Do not cover the parts of the appliance with aluminium foil. • Do not cover the ventilation space of 5 mm between the worktop and front of the unit below it. Warning! If there is a crack on the surface, disconnect power supply to prevent the electric shock. Installation Before the installation , note down this data from the rating plate: • Model description (Modell)................ • Product number (Prod. Nr.) ............. .... • Serial number (Ser. Nr.) ...............
electrolux Assembly min. 500 mm min. 50 mm min. 50 mm min. 5 mm R 5mm = 600mm 490+1mm 750+1mm = min. 20 mm min. 25 mm min. 5 mm min. 38 mm min.
electrolux 5 Description of the appliance Cooking surface layout 1 2 180 1 Induction cooking zone 1800W, with the Power function 2800W 2 Induction cooking zone 2400W, with the Power function 3700W 3 Control panel 4 Induction cooking zone 1400 W, with Power function 2500W 5 Induction cooking zone 1800W, with the Power function 2800W 300 mm mm 180 145 5 4 mm mm 3 Control panel layout 1 3 2 12 4 5 6 11 10 9 7 8 Use the sensor fields to operate the appliance.
electrolux sensor field 10 function increases or decreases the time / 11 selects the cooking zone 12 starts and stops STOP+GO The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is slightly heated by the residual heat of the cookware. +number in the timer display shows that there is a malfunction. Residual heat indicator Warning! Risk of burns from residual heat! Operating the appliance onds.
electrolux 7 Switching the Power function on and off The Power function makes more power available to the induction cooking zones. The Power function is activated for 10 minutes at most. After that the induction cooking zone automatically switches back to the highest , the heat setting (9). To switch on, touch indicator above comes on. To switch off, touch a heat setting (1-9). Power management • Checking the remaining time: select . The indicator of the cooking zone with the cooking zone flashes faster.
electrolux • Touch to stop this function. The heat setting that you set before comes on. does not stop the timer function. fully locks the control panel but not the . sensor field Locking / unlocking the control panel . You can lock the control panel, but not It prevents an accidental change of the heat setting. Touch the symbol . The display comes on. The Timer still operates. Touch the symbol to switch off this function. The display goes out.
electrolux 9 • clicking: electric switching occurs. • hissing, buzzing: the fan operates. The noises are normal and do not refer to any defects. Energy saving • If possible, always put the lids on the cookware. • Put cookware on a cooking zone before you start it. • Stop the cooking zones before the end of the cooking time to use residual heat. Heat setting -1 Use to: • The bottom of pans and cooking zones must have the same dimension.
electrolux Scratches or dark stains on the glass ceramic have no effect on how the appliance operates. Removing the dirt: 1. – Remove immediately: melting plastic, plastic foil, and food containing sugar. Use a special glass ceramic scraper. Put the scraper on the glass ceramic surface at an acute angle and slide the blade on the surface. – Stop the appliance and let it cool down before you clean: limescale rings, water rings, fat stains, shiny metallic discolorations.
electrolux 11 Problem There is no signal when you touch panel keys Possible cause and remedy The sound is off. Switch on the sound. If you tried the above solutions and cannot repair the problem, speak to your dealer or the Customer Care Department. Give the data from the rating plate, three-digit-letter code for the glass ceramic (it is in the corner of the cooking surface) and an error message that comes on.
www.electrolux.com To buy accessories, consumables and spare parts at our online shop please visit: www.electrolux.co.
