user manual Ceramic glass induction hob EHD68100I
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents 2 3 5 6 Helpful hints and tips 7 Care and cleaning 8 What to do if… 9 Environment concerns 10 Subject to change without notice For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance.
electrolux 3 • Do not cover the ventilation space of 5 mm between the worktop and front of the unit below it. Warning! If there is a crack on the surface, disconnect power supply to prevent the electric shock. Installation instructions Before the installation , note down this data from the rating plate: • Model description (Modell)................ • Product number (Prod. Nr.) ............. .... • Serial number (Ser. Nr.) ............... You find the rating plate of the appliance on its lower casing.
electrolux Assembly min. 500 mm min. 50 mm min. 50 mm min. 5 mm R 5mm = 600mm 490+1mm 560+1mm = min. 20 mm min. 25 mm min. 5 mm If you use a protection box (additional accessory), the front ventilation space of 5 mm and protective floor directly below the appliance are not necessary. min. 38 mm min.
electrolux 5 Product description Cooking surface layout 1 2 145 180 mm 1 Induction cooking zone 1100 W 2 Induction cooking zone 1500 W 3 Induction cooking zone 1100 W, with Power function 2100 W 4 Control panel 5 Induction cooking zone 1900 W, with Power function 2400 W mm 210 145 5 4 3 mm mm Control panel layout 1 2 3 4 5 6 B B 8 7 Use the sensor fields to operate the appliance. Displays, indicators and sounds tell which functions operate.
electrolux Display Description The cooking zone operates - The induction cooking zone does not sense the cookware There is a malfunction A cooking zone is still hot (residual heat) Lock/Child safety device is on Power function is active The automatic switch off is active The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is slightly heated by the residual heat of the cookware.
electrolux 7 figure). The power function increases the power to the maximum level for one cooking zone in the pair and automatically decreases in the second cooking zone to a lower power level. The display for the reduced zone alternates. • Stopping the sound: touch You can use the timer as a minute minder while cooking zones do not operate. Touch . Touch or to select the time.
electrolux The bottom of the cookware must be as thick and flat as possible. Cookware dimensions : induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit. But, the magnetic part of the bottom of the cookware must have a minimum diameter of approximately 3/4 of the cooking zones. Operating noises If you can hear • cracking noise: cookware is made of different materials (Sandwich construction).
electrolux 9 For your safety, do not clean the appliance with steam blasters or high-pressure cleaners. Scratches or dark stains on the glass ceramic have no effect on how the appliance operates. Removing the dirt: 1. – Remove immediately: melting plastic, plastic foil, and food containing sugar. Use a special glass ceramic scraper. Put the scraper on the glass ceramic surface at an acute angle and slide the blade on the surface.
electrolux Problem comes on Possible cause and remedy There is an error in the appliance, because a cookware boils dry or you use not correct cookware. Overheating protection for the cooking zone operates. The automatic switch-off operates. Switch off the appliance. Remove the hot cookware. After approximately 30 seconds switch on the cooking zone again. should disappear, residual heat indicator can stay. Cool down the cookware and check it with the section Cookware for the induction cooking zone.
electrolux 11
www.electrolux.com www.electrolux.co.
