user manual Ceramic glass induction hob EHD60100P
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS 2 3 5 6 Helpful hints and tips 8 Care and cleaning 9 What to do if... 10 Environment concerns 11 Subject to change without notice For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance.
electrolux 3 • Do not cover the ventilation space of 5 mm between the worktop and front of the unit below it. Warning! If there is a crack on the surface, disconnect power supply to prevent the electric shock. INSTALLATION Before the installation , note down the serial number (Ser. Nr.) from the rating plate. The rating plate of the appliance is on its lower casing.
electrolux Assembly min. 500 mm min. 50 mm min. 50 mm min. 5 mm R 5mm = 600mm 490+1mm 560+1mm = min. 20 mm min. 25 mm min. 5 mm min. 38 mm min.
electrolux 5 DESCRIPTION OF THE APPLIANCE Cooking surface layout 1 2 145 120/180 mm 1 Single cooking zone 1200 W 2 Double cooking zone 700/1700 W 3 Induction cooking zone 1400 W, with Power function 2500 W 4 Control panel 5 Induction cooking zone 2300 W, with Power function 3700 W mm 145 210 3 mm mm 5 4 Control panel layout 1 2 11 3 10 4 9 5 6 7 8 Use the sensor fields to operate the appliance. Indicators, displays and sounds tell which functions operate.
electrolux Heat setting displays Displays and sounds tell which functions are started Display Description The cooking zone is off Keep warm/STOP+GO function is active The cooking zone operates - Automatic warm up function is active The induction cooking zone does not sense the cookware There is a malfunction A cooking zone is still hot (residual heat) Lock/Child safety device is on Power function is active The automatic switch off is active Residual heat indicator The induction cooking zones make th
electrolux 7 Automatic Heat Up Power management 11 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the graphic), and then decreases to the necessary heat setting. To start the Automatic Heat Up function: 1. Touch . comes on in the display. 2. Touch again and again until comes on in the display. 3.
electrolux You can use the timer as a minute minder while cooking zones do not operate. Touch . Touch + or - to select the time. When the time elapses, the sound operates and 00 flashes Starting the STOP+GO function sets all cooking zones that The operate to a keep warm setting. • Touch to start this function. The symcomes on. bol • Touch to stop this function. The heat setting that you set before comes on. does not stop the timer function. locks the control bars.
electrolux 9 cookware is made of different materials (Sandwich construction). • humming: you use high power levels. • clicking: electric switching occurs. • hissing, buzzing: the fan operates. The noises are normal and do not refer to any defects. Energy saving • If possible, always put the lids on the cookware. Heat setting Use to: • Put cookware on a cooking zone before you start it. • Stop the cooking zones before the end of the cooking time to use residual heat.
electrolux For your safety, do not clean the appliance with steam blasters or high-pressure cleaners. Scratches or dark stains on the glass ceramic have no effect on how the appliance operates. To remove the dirt: 1. – Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the dirt can cause damage to the appliance. Use a special scraper for the glass . Put the scraper on the glass surface at an acute angle and move the blade on the surface .
electrolux 11 Problem Possible cause and remedy comes on. • The cookware is incorrect. Use the correct cookware. • There is no cookware on the cooking zone. Put cookware on the cooking zone. • The diameter of the bottom of the cookware is too small for the cooking zone. Use the correct cookware. and a number come on. There is an error in the appliance. Disconnect the appliance from the electrical supply for some time.
www.electrolux.
