user manual Ceramic glass hob EHC326BA EHC724BA
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Safety instructions Product description Operating instructions Helpful hints and tips Cleaning and care 2 4 6 10 11 W ha t to do if . . . T ec hnic a l da ta Environment concerns Installation Instructions Warranty 11 12 13 13 16 Subjec t to c ha nge without notic e Safety instructions Before the installation and use of the appliance, carefully read the supplied instructions.
electrolux 3 Make sure that a shock protection is installed. Do not let the electricity bounds touch the appliance or hot cookware, when you connect the appliance to the near sockets. Do not let the electricity bounds tangle. Use a strain relief clamp on cable. Use the correct mains cable. Make sure not to cause damage to the mains plug and to the mains cable. Contact the Service or an electrician to change a damaged mains cable.
electrolux Product description Cooking surface layout EHC326BA 1 Cooking zone 18 00 W 1 2 Cooking zone 1200 W 2 3 Glass bar 3 4 Control panel 4 2 1 EHC724BA 1 Cooking zone 18 00 W 2 Cooking zone 1200 W 3 Glass bar 4 Control panel 3 4 Control panel layout 4 3 5 6 12 11 7 8 2 1 13 10 9
electrolux 5 sensor eld function 1 It activates and deactivates the appliance. 2 It locks/unlocks the control panel. 3 It activates and deactivates STOP+GO function. 4 A heat setting display. It shows the heat setting. 5 Cooking zones' indicators of timer. It shows for which of the cooking zones you set the time. 6 The timer display. It shows the time in minutes. 7 It shows that the CountUp Timer function operates. 8 It shows that the Minute minder / the CountDown .
electrolux OptiHeat Control (3 step Residual heat indicator) WARNING! \ \ Risk of burns from residual heat! OptiHeat Control indicates the level of the residual heat. Operating instructions On and O Touch for 1 second to start or stop the appliance. Automatic Switch O The function stops the hob automatically if: all cooking zones are o . you do not set the heat setting after you start the hob. you cover a sensor eld with an object (a pan, a cloth, etc.) for longer than 10 seconds.
electrolux 7 The automatic heat up Automatic heat up function sets the high est heat setting for some time, and then decreases to the necessary level. To start function touch the symbol and then set necessary heat setting. comes on when the cooking zone operates on highest heat setting. To stop the function change heat setting. 12 11 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 The Timer The Count Down Timer.
electrolux The Count up timer Use the Count up timer to monitor how long the cooking zone operates. t The selection of the cooking zone (if more than 1 cooking zone operates): touch again and again until the indicator of a necessary cooking zone comes on. When this function is activated, comes on. t To activate the Count up timer: Touch comes on. The symbol goes out and t To see how long the cooking zone operates: set the cooking zone with . The indicator of the cooking zone starts to flash quickly.
electrolux 9 Lock You can lock the control panel, but not . It prevents an accidental change of the heat setting. First set the heat setting. To start this function touch . The symbol comes on for 1 seconds. The Timer stays on. To stop this function touch . The heat setting that you set before comes on. When you stop the appliance, you also stop this function. The child safety device This function prevents an accidental operation of the hob. Starting the child safety device t Start the hob with .
electrolux Helpful hints and tips Cookware • The bottom of the cookware must be as thick and flat as possible. • Cookware made of enamelled steel and with aluminium or copper bottoms can cause discoloration on glass ceramic surface. • Stop the cooking zones before the end of the cooking time to use residual heat. • The bottom of pans and cooking zones must have the same dimension. Examples of cooking applications The data in the table is for guidance only.
electrolux 11 Cleaning and care Clean the appliance after each use. Always use cookware with clean bottom. Scratches or dark stains on the glassceramic cause no effect on how the appliance operates. To remove the dirt: 1. Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the dirt can cause damage tothe appliance. Use a special scraper(option to buy) for the glass . Put the scraper on the glass surface at an acute angle and move the blade on the surface .
electrolux Technical data Product dimensions (w x d) mm Model Cut-out dimensions (w x d) mm PNC 520 X 300 520 X 300 EHC326BA EHC724BA 490 X 270 949163145 490 X 270 949163196 Voltage (volts) Product dimensions Cycles (w x d)(Hz) mm 320 X 520 700 X 420 Service Cord Cut-out dimensions 300 tted X 490 670tted X 390 (w x d) mm elements 220 - 240 220 - 240 50 50 no.
electrolux 13 Enviorment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
electrolux Technical data t The electrical mains terminal is live. t Make electrical mains terminal free of voltage. t Follow connection schematic. t Observe electrical safety rules. t Ensure anti-shock protection by installing correctly. t The appliance must be connected to the electrical supply by a qualified electrician. t Loose and inappropriate plug and socket connections can make the terminal overheat. t Have the clamping connections correctly installed by a qualified electrician.
electrolux 15 Assembly for EHC326BA 1 2 1 03+ 30 10 min. 25 mm min. 38 mm min.
electrolux 16 Assembly for EHC724BA 700 420 1 2 680 400 min. 25 mm min. 38 mm min.
305564205 - A - 092112
