User manual

11
OUTBOARD IGNITER PLATE INSTALLATION (SEE DRAWING ON
FOLLOWING PAGE)
The electronic igniters require a standard size deep electrical box, (available at
a local hardware store), with a minimum depth of 6 cm to be mounted in the
structure. It should be placed on the right front or right side of the outdoor
cooking center, with the center of the igniter button no more than ca 10 cm from
the grill. The igniter plate (included with the model EGL3001X) fits over the
standard electrical box once mounted in the structure. (See drawing on following
page). If there is a ground wire for the igniter, it needs to be grounded to a metal
structure in order for the igniter to work.
UTILITIES
The optional rotisserie kit requires a 230 volt electric supply and GFI
receptacle, that should be installed by a qualified electrical technician. If your plan
includes a sink, arrange for a certified plumbing technician to run a water line to
the site.
ELECTRICAL GROUNDING INSTRUCTIONS
The optional rotisserie kit is equipped with a (grounding) plug for your
protection against shock hazard and should be plugged directly into a properly
grounded receptacle. Do not cut or remove the grounding prong from this plug.
Built-In Instructions
for model EGL3001X