Instruction book Models/ WA51-305 series/ WA71-305 series/
OPERATING MANUAL Thank you for choosing the Electrolux WELL A7 / A5 series air purifier. Always use original Electrolux consumables, accessories and spare parts to get the best results out of your unit. This appliance is designed with the environment in mind and hence all plastic parts are marked for recycling purposes. GENERAL SAFETY INFORMATION This USER MANUAL provides specific operating instructions for your model OR series. Use the unit only as instructed in this manual.
CAUTION! – WALL MOUNTING: AVOID INJURY OR DAMAGE TO PROPERTY Always use appropriate screw and plas�c plug for wall hang hook, depending on the wall material (e.g. nailable plug with screws for concrete OR expandable plug with screws for drywall, etc.). If you are not sure of the type of wall, have a qualified builder OR constructor inspect and recommend the correct screw and plug type according to local or na�onal building standards.
adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper outlet according to the National Electrical Code OR applicable local codes and ordinances. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read product labels for flammability and other warnings. Do not let water or any other liquid or flammable detergent enter the unit to avoid electric shock and/or a fire hazard.
KEY COMPONETNS OF WELL A7 / A5 SERIES AIR PURIFIERS 1 2 3 4 Removable & customizable front panel Front panel magnets Mesh pre-filter Ultrafine particle filter www.electrolux.
5 6 7 8 9 10 11 12 13 VOC carbon filter Air quality indicator UI Display (UI: User Interface) Removable top handle for carrying Air outlet grill Back grip for li�ing & hanging Sensor box Sensor window Removable feet x2 18 19 20 21 22 23 24 25 26 POWER bu�on (ON/OFF) MODE bu�on Mode display Filter change icon Alert icon WiFi icon Ionizer icon Child lock icon FAN SPEED slider & indicator NOTE: Your specific model may not have all the components and features listed within this USER MANUAL.
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 www.electrolux.
25 26 28 29 27 www.electrolux.
UNBOXING & SETUP – picture pages 6-7 Please be careful while unboxing the air purifier. The unit has several detachable components which may have come loose in transport, so open the box with care and while placed on a large flat surface OR the floor. 1. Gently remove the unit (e.g. with top handle when available) and the ancillary components from the main box. Remove the plas�c packaging and discard as per safety and local recycling instruc�ons. 2. If wall moun�ng: a.
b. Lift the unit and place it next to the power socket to be used. c. Ensure a clearance of at least 30 cm between front (air inlet) and at least 20 cm between right side (sensor window) of the unit and other surfaces. Also ensure ample free space above the top (air outlet grill), so the unit can operate at its best in spreading pure air through the room. d. When wall mounting, please remove the cylindrical feet from the base of the unit for more efficient air distribution. 4.
and the UI display’s type & intensity level. The fan speed cannot be adjusted manually by the user under this mode. Please see the AIR QUALITY INDICATOR section for more details. NOTE: The AQI light will turn off completely in a dark room when the unit is in smart mode, so as not to disturb. MANUAL: In the MANUAL mode the unit will utilize the sensor data as input only to show the air quality level via the air quality indicator but will not self-adjust the fan speed.
the error type, component details and any mitigating actions. More details can be found in the ERRORS & TROUBLESHOOTING section below. 16. CHILD LOCK: The unit is equipped with a safety lock feature to disable the product UI to avoid unintended pressing. The child lock feature can be toggled ON/OFF via the Wellbeing App or by long pressing for 5 seconds the POWER and MODE button simultaneously. The child lock icon will light up when the feature is activated. 17.
For ANZ models only: LIGHT COLOR White Green Yellow Orange Red Purple Maroon PM 2.5 (μg/m3) 0 - 12 13 - 35 36 - 55 56 - 150 151 – 250 >250 AIR QUALITY STATUS Calibrating | Onboarding Very Good Good Poor Very Poor Bad Very Bad FAN SPEED 2 3 4 5 5 5 ONBOARDING – picture pages 6-7 NOTE: Some steps in the onboarding flow may have changed, please follow step-step instructions in the latest version of the App as reference in case of discrepancy. Please ensure home WiFi is running on 2.
the POWER button for 5 seconds until WiFi icon stops blinking and is not lit. Unit’s WiFi settings are now reset and it will not aim to connect to your WiFi network. CLEANING, CARING & STORAGE – picture pages 6-7 NOTE: Always unplug the air purifier before cleaning to prevent shock or fire hazards. Never use abrasive, harsh detergents OR wax for cleaning the unit. The high efficiency filters cannot be washed, they must always be replaced when at the end of life. CLEANING & CARING 27.
enabled, the Wellbeing App will inform you when the filter life is close to end of life (e.g. at 5%). 32. When one or more of the filters is at end of life, the filter change icon will light up on the product UI to indicate the need for replacement. Please head over to the Wellbeing App to correctly identify which filter is at end of life and needs replacement. When filter is at end of life, the unit’s fan speed may be capped in SMART mode. 33.
37. If you are replacing an existing top PU handle: a. Remove the two screws, twisting counterclockwise and set aside along with existing handle. b. Remove any protective plastic packaging from the new handle and fit it onto the unit by tightening the screws, twisting clockwise, till you meet some resistance. Ensure a snug fit with no gap in between the unit and the screw. c. Test out the handle by lifting the unit 5-6 cm above the ground with it and giving it a gentle shake. 38.
43. Attach the front panel with the newly fit fabric cover back to the unit and check the edges to ensure there is no blockage of the air inlet area. NOTE: Customizable fabric covers are machine washable, as per the care instructions provided with the kit. It is important that the elastic band along the edges of the fabric cover is unbroken and tight as it helps ensure an optimum flow of air into the unit, with minimal decrease in performance.
2 3 4 5 18 The air purifier is running at max fan speed all the time for extended periods The air purifier is running at lowest fan speed all the time for extended periods The air purifier produces a loud or abnormal noise The air purifier or fan does not operate resolve, please head over to the Wellbeing App and check for details whenever you see this icon lit. If in MANUAL mode, please check the fan speed slider on the product UI or within Wellbeing App and adjust it to desired level.
If you have recently (re)placed a filter please remove and reinsert it. Check to make sure that the filter is oriented correctly, so the RFID sensor can detect it. 6 The air purifier is running but the air quality does not improve If neither of the above steps OR instructions in the Wellbeing App help, please refer to item 9 in the table.
For more information visit electrolux.
