Gebrauchsanweisung , Notice d'utilisation et d'installation, Installatie- en gebruiksaanwijzing EFC 9440 User manual, Instrucciones de montaje y manejo, Manual de Instruções D F NL UK E P
Contents UK Safety warnings ................................................................................................................................................... 32 For the installer ...................................................................................................................................................... 32 For the user ..................................................................................................................................................
Safety warnings For the installer aforementioned measures. When the hood is used in its extractor function, the following rules must be followed to obtain optimal operation: short and straight outlet hose keep bends in outlet hose to a minimum never install the hoses with an acute angle, they must always follow a gentle curve. keep the hose as large as possible (preferably the same diameter as the outlet hole).
For the user This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam.
Description of the Appliance The hood is supplied as an extractor unit and can also be used with a filtering function by fitting one charcoal filter. You will need an original charcoal filter for this function (Available from your local Service Force Centre). Coupling ring Extraction In this version fumes are extracted to the outside via a hose connected to the coupling ring. Fig. 1. In order to obtain the best performance the hose should have a diameter equal to the outlet hole. Fig.
Maintenance and care The hood must always be disconnected from the electricity supply before beginning any maintenance work. Cleaning the hood Warning Clean the outside of the hood using a damp cloth and a mild detergent. Never use corrosive, abrasive or flammable cleaning products. Never insert pointed objects in the motors protective grid. Wash the outside surfaces using a delicate detergent solution. Never use caustic detergents or abrasive brushes or powders.
Charcoal filter The charcoal filter should only be used if you want to use the hood in the recirculation function. To do this you will need an original charcoal filter (available from your local Service Force Centre). Cleaning/replacing the charcoal filter Unlike other charcoal filters, the LONGLIFE charcoal filter can be cleaned and reactivated. At normal use the filter should be cleaned every second month (when using the hood 2,5 hours per day, in avarage).
What to do if If your appliance fails to work properly please carry out the following checks. Symptom Solution The cooker hood will not start... Check that: The hood is connected to the electricity supply. Check that a fan speed has been selected The cooker hood is not working Check that: The fan speed is set high enough for the task. The grease filters are clean. The kitchen is adequately vented to allow the entry of fresh air.
Technical assistance service (not for UK) You are welcome to telephone our technical assistance service (see list of technical assistance centres) whenever you need information or in the unlikely event of a fault. For service in Australia call 1300 650 020. When calling, please be ready to specify: 1. The model code number 2. The serial number (E-Nr.) 3. The manufacturing number (F-Nr.) This information is shown on the registration plate inside the unit behind the grease filter.
Installation Unpacking Check that the cooker hood has no damages. Transportation damages should immediately be reported to the one responsible for the transport Damages, faults and eventually missing details should immediately be reported to the seller. Take care of the packing material so that small children cannot play with it. Min 50 cm Location The hood is to be mounted on the wall. When installed, the hood must be not less than 50 cm. above electric burners or 70 cm.
Mounting accessories included 1 deflector 1 chimney support (3 pieces to assemble) 2 metal screws 3,5 x 9,5 (to affix the deflector to the support) 1 reduction flange Ø 125-120 mm (Only for model EFC 9460 X / 942 120 705) 1 support bracket 5 wood-screws 5 x 45 mm (for wall mounting) 5 wall plugs Ø 8 mm (for wall mounting) 2 metal screws 2,9 x 6,5 (for chimney flue mounting) 6 metal screws 4 x 20 (to affix the screen to the cooker hood) 1 allen spanner (for TORX 10/20 screws) 40
Installation Wall unit mounting - Fig. 7 Disconnect the hood during electrical connection, by turning the home mains switch off. Remove the 2 screws fitted inside the lower part of the hood at the points in which it is fixed to the motor unit (see also operation 3). Rest the motor unit on a flat surface and thread the lower part G of the chimney section onto it (1). 20a Make all the electrical connections between the two F parts (2). 20a 14 Secure the two parts using 8 H screws (3).
The Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world. © Electrolux 2003 LI1XQH Ed.
