EEA22100L EN Dishwasher User Manual
www.electrolux.com CONTENTS 1. SAFETY INFORMATION....................................................................................2 2. SAFETY INSTRUCTIONS..................................................................................4 3. PRODUCT DESCRIPTION................................................................................ 6 4. CONTROL PANEL............................................................................................. 6 5. PROGRAMME SELECTION............................
ENGLISH 3 responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.electrolux.com • • • • • • • • Follow the maximum number of 9 place settings. If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp ends pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down. Do not leave the appliance with the open door unattended to avoid stepping accidentally onto it.
ENGLISH • • access to the mains plug after the installation. Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. This appliance is fitted with a 13 A mains plug. If it is necessary to change the mains plug fuse, use only a 13 A ASTA (BS 1362) fuse (UK and Ireland only). 2.3 Water connection • • • • • Do not cause damage to the water hoses.
www.electrolux.com • Cut off the mains cable and discard it. • Remove the door catch to prevent children and pets to get closed in the appliance. 3. PRODUCT DESCRIPTION The graphics below is just a general product overview. For more detailed information, refer to other chapters and/or documents provided with the appliance.
ENGLISH 3 Indicators 4 MY TIME selection bar 5 ExtraPower button 7 6 AUTO Sense button 4.1 Indicators Indicator Description The ECO programme indicator. It indicates the most environmentally friendly programme selection for a normally soiled load. Refer to "Programme selection". Rinse aid indicator. It is on when the rinse aid dispenser needs refill‐ ing. Refer to "Before first use". Salt indicator. It is on when the salt container needs refilling. Refer to "Before first use". Machine Care indicator.
www.electrolux.com 5.3 AUTO Sense The appliance senses the degree of soil and the amount of dishes in the baskets. It adjusts the temperature and quantity of water as well as the wash duration. The AUTO Sense program automatically adjusts the wash cycle to the type of load. 5.
ENGLISH Programme 1) Water (l) Energy (kWh) Duration (min) Pre-rinse 2.8 - 3.4 0.011 - 0.014 15 90min 8.5 - 10.4 0.743 - 0.909 90 ECO 9.9 0.7782)/0.7793) 240 AUTO Sense 8.0 - 10.7 0.683 - 1.047 120 - 170 Machine Care 7.4 - 8.9 0.396 - 0.484 60 9 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
www.electrolux.com represent available settings. For each setting, a dedicated indicator flashes: 4 1 a negative effect on the washing results and on the appliance. The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales. 5 3 The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area.
ENGLISH Water softener level Amount of water (l) 1 250 2 100 3 62 4 47 5 25 6 17 7 10 8 5 9 3 10 3 In case of the high water softener setting, it may occur also in the middle of the programme, before the rinse (twice during a programme). Regeneration initiation has no impact on the cycle duration, unless it occurs in the middle of a programme or at the end of a programme with a short drying phase.
www.electrolux.com • The lights related to MY TIME selection bar are on. How to navigate in setting mode You can navigate in setting mode using MY TIME selection bar. AirDry is automatically activated with all programmes other than Pre-rinse. CAUTION! Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance. A Use OK to enter the selected setting and to confirm changing its value. How to change a setting 6.
ENGLISH 3. Press Previous or Next to change the value. 4. Press OK to confirm the setting. • The new setting is saved. • The appliance returns to the setting selection. 5. Press and hold simultaneously 13 The appliance returns to the programme selection. The saved settings remain valid until you change them again. and for about 3 seconds to exit setting mode. 7. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply.
www.electrolux.com 7.2 How to fill the rinse aid dispenser B C CAUTION! Only use rinse aid designed specifically for dishwashers. 1. Press the release element (A) to open the lid (B). 2. Pour the rinse aid in the dispenser (C) until the liquid reaches the marking "FILL". 3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation. 4. Close the lid. Make sure that the lid locks into position. A 8. DAILY USE 1. Open the water tap. 2.
ENGLISH 2. Press . The light related to the button is on. ExtraPower is not a permanent option and must be activated every time before you start a programme. It is not possible to activate or deactivate ExtraPower while a programme is running. Activating ExtraPower increases the water and energy consumption as well as the programme duration. 8.5 How to start the AUTO Sense program 1. Press . The light related to the button is on. MY TIME and ExtraPower are not applicable to this program. 2.
www.electrolux.com 8.11 End of the programme When the programme is complete, the Auto Off function switches the appliance off automatically. All buttons are inactive except for the on/off button. 9. HINTS AND TIPS 9.1 General – Make sure that the current level of the water softener agrees with the hardness of the water supply. – Follow the instructions in the chapter "Care and cleaning".
ENGLISH 9.3 What to do if you want to stop using multi-tablets Before you start using separately detergent, salt and rinse aid, complete the following steps: 1. Set the highest level of the water softener. 2. Make sure that the salt and rinse aid containers are full. 3. Start the 30min programme. Do not add detergent and do not put dishes in the baskets. 4. When the programme is completed, adjust the water softener according to the water hardness in your area. 5. Adjust the released quantity of rinse aid.
www.electrolux.com 10.1 Machine Care Machine Care is a programme designed to clean the appliance interior with optimal results. It removes limescale and grease buildup. When the appliance senses the need for is on. Start the cleaning, the indicator Machine Care programme to clean the appliance interior. How to start the Machine Care programme Before starting the Machine Care programme, clean the filters and spray arms. 1. Use a descaler or a cleaning product designed specifically for dishwashers.
ENGLISH 19 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4. Wash the filters. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 10.6 Cleaning the lower spray arm We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1.
www.electrolux.com 2. To detach the spray arm, turn the mounting element clockwise. 3. To install the spray arm back, press it downwards. 3. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. 10.7 Cleaning the upper spray arms We recommend to clean the upper spray arms regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results.
ENGLISH 21 11. TROUBLESHOOTING WARNING! Improper repair of the appliance may pose a danger to the safety of the user. Any repairs must be performed by qualified personnel. The majority of problems that may occur can be solved without the need to contact an Authorised Service Centre. Refer to the below table for information on possible problems. With some problems, the lights related to MY TIME selection bar flash intermittently to indicate a malfunction and the alarm code.
www.electrolux.com Problem and alarm code Possible cause and solution Malfunction of the water level detection sensor. • The lights related to MY TIME selection bar flash 4 times intermit‐ tently. • An acoustic signal sounds intermittently. • • Make sure that the filters are clean. Switch the appliance off and on. Malfunction of the wash pump or the drain pump. • The lights related to MY TIME selection bar flash 5 times intermit‐ tently. • An acoustic signal sounds intermittently.
ENGLISH Problem and alarm code Possible cause and solution The programme lasts too long. • Small leak from the appli‐ ance door. • The appliance door is diffi‐ cult to close. • Rattling or knocking sounds from the inside of the appliance. • 23 If the delay start option is set, cancel the delay set‐ ting or wait for the end of the countdown. Activating ExtraPower increases the programme du‐ ration. • The appliance is not levelled. Loosen or tighten the adjustable feet (if applicable).
www.electrolux.com Problem Possible cause and solution Poor drying results. • • • • • • Tableware was left for too long inside the closed appliance. Activate AirDry to set the automatic opening of the door and to improve the drying per‐ formance. There is no rinse aid or the dosage of rinse aid is not sufficient. Fill the rinse aid dispenser or set the level of rinse aid to a higher level. The quality of the rinse aid can be the cause.
ENGLISH Problem Possible cause and solution Limescale deposits on the • tableware, on the tub and on • the inside of the door. • • • • • • Dull, discoloured or chipped tableware. 25 • • • The level of salt is low, check the refill indicator. The cap of the salt container is loose. Your tap water is hard. Refer to "The water soft‐ ener". Use salt and set regeneration of the water softener even when multi-functional tablets are used. Refer to "The water softener".
www.electrolux.com 12.1 Link to the EU EPREL database It is possible to find information related to the performance of the product in the EU EPREL database using the link https:// eprel.ec.europa.eu and the model name and product number that you can find on the rating plate of the appliance. Refer to the chapter "Product description". The QR code on the energy label supplied with the appliance provides a web link to the registration of this appliance in the EU EPREL database.
156940840-A-112020 www.electrolux.
